Application.SetUnhandledExceptionMode Yöntem

public:
 static void SetUnhandledExceptionMode(System::Windows::Forms::UnhandledExceptionMode mode);

public static void SetUnhandledExceptionMode (System.Windows.Forms.UnhandledExceptionMode mode);

static member SetUnhandledExceptionMode : System.Windows.Forms.UnhandledExceptionMode -> unit

Public Shared Sub SetUnhandledExceptionMode (mode As UnhandledExceptionMode)

Parametreler

Özel durumlar

Örnekler

Aşağıdaki kod örneği, Windows Forms iş parçacıklarında gerçekleşen özel durumlar ve diğer iş parçacıklarında oluşan özel durumlar için olay işleyicilerini ayarlar. SetUnhandledExceptionMode Uygulamanın kullanıcı yapılandırma dosyasındaki ayarlardan bağımsız olarak tüm özel durumların uygulama tarafından işlenmesini sağlar. Ui iş parçacığı özel durumlarını işlemek için olayını ve UnhandledException UI iş parçacığı olmayan özel durumları işlemek için olayını kullanırThreadException. Bir UnhandledException uygulamanın sonlandırılmasını engelleyemediğinden, örnek sonlandırmadan önce hatayı uygulama olay günlüğüne kaydeder.

Bu örnekte sınıfınızda button1Form ve button2olmak üzere iki Button denetim tanımladığınız varsayılır.

   // Creates a class to throw the error.
public:
   ref class ErrorHandler: public System::Windows::Forms::Form
   {
      // Inserts the code to create a form with a button.

      // Programs the button to throw an exception when clicked.
   private:
      void button1_Click( Object^ /*sender*/, System::EventArgs^ /*e*/ )
      {
         throw gcnew ArgumentException( "The parameter was invalid" );
      }

   public:
      static void Main()
      {
         // Creates an instance of the methods that will handle the exception.
         CustomExceptionHandler ^ eh = gcnew CustomExceptionHandler;
         
         // Adds the event handler to the event.
         Application::ThreadException += gcnew ThreadExceptionEventHandler( eh, &Form1::CustomExceptionHandler::OnThreadException );
         
         // Runs the application.
         Application::Run( gcnew ErrorHandler );
      }
   };

   // Creates a class to handle the exception event.
internal:
   ref class CustomExceptionHandler
   {
      // Handles the exception event.
   public:
      void OnThreadException( Object^ /*sender*/, ThreadExceptionEventArgs^ t )
      {
         System::Windows::Forms::DialogResult result = ::DialogResult::Cancel;
         try
         {
            result = this->ShowThreadExceptionDialog( t->Exception );
         }
         catch ( Exception^ ) 
         {
            try
            {
               MessageBox::Show( "Fatal Error", "Fatal Error", MessageBoxButtons::AbortRetryIgnore, MessageBoxIcon::Stop );
            }
            finally
            {
               Application::Exit();
            }
         }
         
         // Exits the program when the user clicks Abort.
         if ( result == ::DialogResult::Abort )
         {
            Application::Exit();
         }
      }

      // Creates the error message and displays it.
   private:
      System::Windows::Forms::DialogResult ShowThreadExceptionDialog( Exception^ e )
      {
         String^ errorMsg = "An error occurred please contact the adminstrator with the following information:\n\n";
         errorMsg = String::Concat( errorMsg, e->Message, "\n\nStack Trace:\n", e->StackTrace );
         return MessageBox::Show( errorMsg, "Application Error", MessageBoxButtons::AbortRetryIgnore, MessageBoxIcon::Stop );
      }
   };

Thread newThread = null;

// Starts the application.
public static void Main(string[] args)
{
    // Add the event handler for handling UI thread exceptions to the event.
    Application.ThreadException += new ThreadExceptionEventHandler(ErrorHandlerForm.Form1_UIThreadException);

    // Set the unhandled exception mode to force all Windows Forms errors to go through
    // our handler.
    Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException);

    // Add the event handler for handling non-UI thread exceptions to the event.
    AppDomain.CurrentDomain.UnhandledException +=
        new UnhandledExceptionEventHandler(CurrentDomain_UnhandledException);

    // Runs the application.
    Application.Run(new ErrorHandlerForm());
}

// Programs the button to throw an exception when clicked.
private void button1_Click(object sender, System.EventArgs e)
{
    throw new ArgumentException("The parameter was invalid");
}

// Start a new thread, separate from Windows Forms, that will throw an exception.
private void button2_Click(object sender, System.EventArgs e)
{
    ThreadStart newThreadStart = new ThreadStart(newThread_Execute);
    newThread = new Thread(newThreadStart);
    newThread.Start();
}

// The thread we start up to demonstrate non-UI exception handling.
void newThread_Execute()
{
    throw new Exception("The method or operation is not implemented.");
}

// Handle the UI exceptions by showing a dialog box, and asking the user whether
// or not they wish to abort execution.
private static void Form1_UIThreadException(object sender, ThreadExceptionEventArgs t)
{
    DialogResult result = DialogResult.Cancel;
    try
    {
        result = ShowThreadExceptionDialog("Windows Forms Error", t.Exception);
    }
    catch
    {
        try
        {
            MessageBox.Show("Fatal Windows Forms Error",
                "Fatal Windows Forms Error", MessageBoxButtons.AbortRetryIgnore, MessageBoxIcon.Stop);
        }
        finally
        {
            Application.Exit();
        }
    }

    // Exits the program when the user clicks Abort.
    if (result == DialogResult.Abort)
        Application.Exit();
}

// Handle the UI exceptions by showing a dialog box, and asking the user whether
// or not they wish to abort execution.
// NOTE: This exception cannot be kept from terminating the application - it can only
// log the event, and inform the user about it.
private static void CurrentDomain_UnhandledException(object sender, UnhandledExceptionEventArgs e)
{
    try
    {
        Exception ex = (Exception)e.ExceptionObject;
        string errorMsg = "An application error occurred. Please contact the adminstrator " +
            "with the following information:\n\n";

        // Since we can't prevent the app from terminating, log this to the event log.
        if (!EventLog.SourceExists("ThreadException"))
        {
            EventLog.CreateEventSource("ThreadException", "Application");
        }

        // Create an EventLog instance and assign its source.
        EventLog myLog = new EventLog();
        myLog.Source = "ThreadException";
        myLog.WriteEntry(errorMsg + ex.Message + "\n\nStack Trace:\n" + ex.StackTrace);
    }
    catch (Exception exc)
    {
        try
        {
            MessageBox.Show("Fatal Non-UI Error",
                "Fatal Non-UI Error. Could not write the error to the event log. Reason: "
                + exc.Message, MessageBoxButtons.OK, MessageBoxIcon.Stop);
        }
        finally
        {
            Application.Exit();
        }
    }
}

// Creates the error message and displays it.
private static DialogResult ShowThreadExceptionDialog(string title, Exception e)
{
    string errorMsg = "An application error occurred. Please contact the adminstrator " +
        "with the following information:\n\n";
    errorMsg = errorMsg + e.Message + "\n\nStack Trace:\n" + e.StackTrace;
    return MessageBox.Show(errorMsg, title, MessageBoxButtons.AbortRetryIgnore,
        MessageBoxIcon.Stop);
}

Private newThread As Thread = Nothing

' Starts the application. 
<SecurityPermission(SecurityAction.Demand, Flags:=SecurityPermissionFlag.ControlAppDomain)> _
Public Shared Sub Main()
    ' Add the event handler for handling UI thread exceptions to the event.
    AddHandler Application.ThreadException, AddressOf ErrorHandlerForm.Form1_UIThreadException

    ' Set the unhandled exception mode to force all Windows Forms errors to go through
    ' our handler.
    Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException)

    ' Add the event handler for handling non-UI thread exceptions to the event. 
    AddHandler AppDomain.CurrentDomain.UnhandledException, AddressOf CurrentDomain_UnhandledException

    ' Runs the application.
    Application.Run(New ErrorHandlerForm())
End Sub


' Programs the button to throw an exception when clicked.
Private Sub button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles button1.Click
    Throw New ArgumentException("The parameter was invalid")
End Sub

' Start a new thread, separate from Windows Forms, that will throw an exception.
Private Sub button2_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles button2.Click
    Dim newThreadStart As New ThreadStart(AddressOf newThread_Execute)
    newThread = New Thread(newThreadStart)
    newThread.Start()
End Sub


' The thread we start up to demonstrate non-UI exception handling. 
Sub newThread_Execute()
    Throw New Exception("The method or operation is not implemented.")
End Sub


' Handle the UI exceptions by showing a dialog box, and asking the user whether
' or not they wish to abort execution.
Private Shared Sub Form1_UIThreadException(ByVal sender As Object, ByVal t As ThreadExceptionEventArgs)
    Dim result As System.Windows.Forms.DialogResult = _
        System.Windows.Forms.DialogResult.Cancel
    Try
        result = ShowThreadExceptionDialog("Windows Forms Error", t.Exception)
    Catch
        Try
            MessageBox.Show("Fatal Windows Forms Error", _
                "Fatal Windows Forms Error", MessageBoxButtons.AbortRetryIgnore, MessageBoxIcon.Stop)
        Finally
            Application.Exit()
        End Try
    End Try

    ' Exits the program when the user clicks Abort.
    If result = DialogResult.Abort Then
        Application.Exit()
    End If
End Sub

' Handle the UI exceptions by showing a dialog box, and asking the user whether
' or not they wish to abort execution.
' NOTE: This exception cannot be kept from terminating the application - it can only 
' log the event, and inform the user about it. 
Private Shared Sub CurrentDomain_UnhandledException(ByVal sender As Object, _
ByVal e As UnhandledExceptionEventArgs)
    Try
        Dim ex As Exception = CType(e.ExceptionObject, Exception)
        Dim errorMsg As String = "An application error occurred. Please contact the adminstrator " & _
            "with the following information:" & ControlChars.Lf & ControlChars.Lf

        ' Since we can't prevent the app from terminating, log this to the event log.
        If (Not EventLog.SourceExists("ThreadException")) Then
            EventLog.CreateEventSource("ThreadException", "Application")
        End If

        ' Create an EventLog instance and assign its source.
        Dim myLog As New EventLog()
        myLog.Source = "ThreadException"
        myLog.WriteEntry((errorMsg + ex.Message & ControlChars.Lf & ControlChars.Lf & _
            "Stack Trace:" & ControlChars.Lf & ex.StackTrace))
    Catch exc As Exception
        Try
            MessageBox.Show("Fatal Non-UI Error", "Fatal Non-UI Error. Could not write the error to the event log. " & _
                "Reason: " & exc.Message, MessageBoxButtons.OK, MessageBoxIcon.Stop)
        Finally
            Application.Exit()
        End Try
    End Try
End Sub


' Creates the error message and displays it.
Private Shared Function ShowThreadExceptionDialog(ByVal title As String, ByVal e As Exception) As DialogResult
    Dim errorMsg As String = "An application error occurred. Please contact the adminstrator " & _
 "with the following information:" & ControlChars.Lf & ControlChars.Lf
    errorMsg = errorMsg & e.Message & ControlChars.Lf & _
 ControlChars.Lf & "Stack Trace:" & ControlChars.Lf & e.StackTrace

    Return MessageBox.Show(errorMsg, title, MessageBoxButtons.AbortRetryIgnore, MessageBoxIcon.Stop)
End Function

Açıklamalar

genellikle Windows Forms tarafından oluşan tüm özel durumları yakalamak mümkün değildir. Bu yöntemi kullanarak, uygulamanıza Windows Forms bileşenler tarafından atılan tüm işlenmemiş özel durumları yakalaması ve çalışmaya devam etmesi veya bunları kullanıcıya sunması ve yürütmeyi durdurması gerekip gerekmediğini bildirebilirsiniz.

yöntemini kullanarak uygulamanızın ana biçimini örneklemeden önce çağrısı SetUnhandledExceptionMode yapın Run .

oluşturulmayan ve Windows Forms sahip olunan iş parçacıklarında oluşan özel durumları yakalamak için olay işleyicisini UnhandledException kullanın.

Ayrıca bkz.

• UnhandledExceptionMode

public:
 static void SetUnhandledExceptionMode(System::Windows::Forms::UnhandledExceptionMode mode, bool threadScope);

public static void SetUnhandledExceptionMode (System.Windows.Forms.UnhandledExceptionMode mode, bool threadScope);

static member SetUnhandledExceptionMode : System.Windows.Forms.UnhandledExceptionMode * bool -> unit

Public Shared Sub SetUnhandledExceptionMode (mode As UnhandledExceptionMode, threadScope As Boolean)

Parametreler

Özel durumlar

Örnekler

Aşağıdaki kod örneği, Windows Forms iş parçacıklarında gerçekleşen özel durumlar ve diğer iş parçacıklarında oluşan özel durumlar için olay işleyicilerini ayarlar. SetUnhandledExceptionMode Uygulamanın kullanıcı yapılandırma dosyasındaki ayarlardan bağımsız olarak tüm özel durumların uygulama tarafından işlenmesini sağlar. Ui iş parçacığı özel durumlarını işlemek için olayını ve UnhandledException UI iş parçacığı olmayan özel durumları işlemek için olayını kullanırThreadException. Bir UnhandledException uygulamanın sonlandırılmasını engelleyemediğinden, örnek sonlandırmadan önce hatayı uygulama olay günlüğüne kaydeder.

Bu örnekte sınıfınızda button1Form ve button2olmak üzere iki Button denetim tanımladığınız varsayılır.

   // Creates a class to throw the error.
public:
   ref class ErrorHandler: public System::Windows::Forms::Form
   {
      // Inserts the code to create a form with a button.

      // Programs the button to throw an exception when clicked.
   private:
      void button1_Click( Object^ /*sender*/, System::EventArgs^ /*e*/ )
      {
         throw gcnew ArgumentException( "The parameter was invalid" );
      }

   public:
      static void Main()
      {
         // Creates an instance of the methods that will handle the exception.
         CustomExceptionHandler ^ eh = gcnew CustomExceptionHandler;
         
         // Adds the event handler to the event.
         Application::ThreadException += gcnew ThreadExceptionEventHandler( eh, &Form1::CustomExceptionHandler::OnThreadException );
         
         // Runs the application.
         Application::Run( gcnew ErrorHandler );
      }
   };

   // Creates a class to handle the exception event.
internal:
   ref class CustomExceptionHandler
   {
      // Handles the exception event.
   public:
      void OnThreadException( Object^ /*sender*/, ThreadExceptionEventArgs^ t )
      {
         System::Windows::Forms::DialogResult result = ::DialogResult::Cancel;
         try
         {
            result = this->ShowThreadExceptionDialog( t->Exception );
         }
         catch ( Exception^ ) 
         {
            try
            {
               MessageBox::Show( "Fatal Error", "Fatal Error", MessageBoxButtons::AbortRetryIgnore, MessageBoxIcon::Stop );
            }
            finally
            {
               Application::Exit();
            }
         }
         
         // Exits the program when the user clicks Abort.
         if ( result == ::DialogResult::Abort )
         {
            Application::Exit();
         }
      }

      // Creates the error message and displays it.
   private:
      System::Windows::Forms::DialogResult ShowThreadExceptionDialog( Exception^ e )
      {
         String^ errorMsg = "An error occurred please contact the adminstrator with the following information:\n\n";
         errorMsg = String::Concat( errorMsg, e->Message, "\n\nStack Trace:\n", e->StackTrace );
         return MessageBox::Show( errorMsg, "Application Error", MessageBoxButtons::AbortRetryIgnore, MessageBoxIcon::Stop );
      }
   };

Thread newThread = null;

// Starts the application.
public static void Main(string[] args)
{
    // Add the event handler for handling UI thread exceptions to the event.
    Application.ThreadException += new ThreadExceptionEventHandler(ErrorHandlerForm.Form1_UIThreadException);

    // Set the unhandled exception mode to force all Windows Forms errors to go through
    // our handler.
    Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException);

    // Add the event handler for handling non-UI thread exceptions to the event.
    AppDomain.CurrentDomain.UnhandledException +=
        new UnhandledExceptionEventHandler(CurrentDomain_UnhandledException);

    // Runs the application.
    Application.Run(new ErrorHandlerForm());
}

// Programs the button to throw an exception when clicked.
private void button1_Click(object sender, System.EventArgs e)
{
    throw new ArgumentException("The parameter was invalid");
}

// Start a new thread, separate from Windows Forms, that will throw an exception.
private void button2_Click(object sender, System.EventArgs e)
{
    ThreadStart newThreadStart = new ThreadStart(newThread_Execute);
    newThread = new Thread(newThreadStart);
    newThread.Start();
}

// The thread we start up to demonstrate non-UI exception handling.
void newThread_Execute()
{
    throw new Exception("The method or operation is not implemented.");
}

// Handle the UI exceptions by showing a dialog box, and asking the user whether
// or not they wish to abort execution.
private static void Form1_UIThreadException(object sender, ThreadExceptionEventArgs t)
{
    DialogResult result = DialogResult.Cancel;
    try
    {
        result = ShowThreadExceptionDialog("Windows Forms Error", t.Exception);
    }
    catch
    {
        try
        {
            MessageBox.Show("Fatal Windows Forms Error",
                "Fatal Windows Forms Error", MessageBoxButtons.AbortRetryIgnore, MessageBoxIcon.Stop);
        }
        finally
        {
            Application.Exit();
        }
    }

    // Exits the program when the user clicks Abort.
    if (result == DialogResult.Abort)
        Application.Exit();
}

// Handle the UI exceptions by showing a dialog box, and asking the user whether
// or not they wish to abort execution.
// NOTE: This exception cannot be kept from terminating the application - it can only
// log the event, and inform the user about it.
private static void CurrentDomain_UnhandledException(object sender, UnhandledExceptionEventArgs e)
{
    try
    {
        Exception ex = (Exception)e.ExceptionObject;
        string errorMsg = "An application error occurred. Please contact the adminstrator " +
            "with the following information:\n\n";

        // Since we can't prevent the app from terminating, log this to the event log.
        if (!EventLog.SourceExists("ThreadException"))
        {
            EventLog.CreateEventSource("ThreadException", "Application");
        }

        // Create an EventLog instance and assign its source.
        EventLog myLog = new EventLog();
        myLog.Source = "ThreadException";
        myLog.WriteEntry(errorMsg + ex.Message + "\n\nStack Trace:\n" + ex.StackTrace);
    }
    catch (Exception exc)
    {
        try
        {
            MessageBox.Show("Fatal Non-UI Error",
                "Fatal Non-UI Error. Could not write the error to the event log. Reason: "
                + exc.Message, MessageBoxButtons.OK, MessageBoxIcon.Stop);
        }
        finally
        {
            Application.Exit();
        }
    }
}

// Creates the error message and displays it.
private static DialogResult ShowThreadExceptionDialog(string title, Exception e)
{
    string errorMsg = "An application error occurred. Please contact the adminstrator " +
        "with the following information:\n\n";
    errorMsg = errorMsg + e.Message + "\n\nStack Trace:\n" + e.StackTrace;
    return MessageBox.Show(errorMsg, title, MessageBoxButtons.AbortRetryIgnore,
        MessageBoxIcon.Stop);
}

Private newThread As Thread = Nothing

' Starts the application. 
<SecurityPermission(SecurityAction.Demand, Flags:=SecurityPermissionFlag.ControlAppDomain)> _
Public Shared Sub Main()
    ' Add the event handler for handling UI thread exceptions to the event.
    AddHandler Application.ThreadException, AddressOf ErrorHandlerForm.Form1_UIThreadException

    ' Set the unhandled exception mode to force all Windows Forms errors to go through
    ' our handler.
    Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException)

    ' Add the event handler for handling non-UI thread exceptions to the event. 
    AddHandler AppDomain.CurrentDomain.UnhandledException, AddressOf CurrentDomain_UnhandledException

    ' Runs the application.
    Application.Run(New ErrorHandlerForm())
End Sub


' Programs the button to throw an exception when clicked.
Private Sub button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles button1.Click
    Throw New ArgumentException("The parameter was invalid")
End Sub

' Start a new thread, separate from Windows Forms, that will throw an exception.
Private Sub button2_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles button2.Click
    Dim newThreadStart As New ThreadStart(AddressOf newThread_Execute)
    newThread = New Thread(newThreadStart)
    newThread.Start()
End Sub


' The thread we start up to demonstrate non-UI exception handling. 
Sub newThread_Execute()
    Throw New Exception("The method or operation is not implemented.")
End Sub


' Handle the UI exceptions by showing a dialog box, and asking the user whether
' or not they wish to abort execution.
Private Shared Sub Form1_UIThreadException(ByVal sender As Object, ByVal t As ThreadExceptionEventArgs)
    Dim result As System.Windows.Forms.DialogResult = _
        System.Windows.Forms.DialogResult.Cancel
    Try
        result = ShowThreadExceptionDialog("Windows Forms Error", t.Exception)
    Catch
        Try
            MessageBox.Show("Fatal Windows Forms Error", _
                "Fatal Windows Forms Error", MessageBoxButtons.AbortRetryIgnore, MessageBoxIcon.Stop)
        Finally
            Application.Exit()
        End Try
    End Try

    ' Exits the program when the user clicks Abort.
    If result = DialogResult.Abort Then
        Application.Exit()
    End If
End Sub

' Handle the UI exceptions by showing a dialog box, and asking the user whether
' or not they wish to abort execution.
' NOTE: This exception cannot be kept from terminating the application - it can only 
' log the event, and inform the user about it. 
Private Shared Sub CurrentDomain_UnhandledException(ByVal sender As Object, _
ByVal e As UnhandledExceptionEventArgs)
    Try
        Dim ex As Exception = CType(e.ExceptionObject, Exception)
        Dim errorMsg As String = "An application error occurred. Please contact the adminstrator " & _
            "with the following information:" & ControlChars.Lf & ControlChars.Lf

        ' Since we can't prevent the app from terminating, log this to the event log.
        If (Not EventLog.SourceExists("ThreadException")) Then
            EventLog.CreateEventSource("ThreadException", "Application")
        End If

        ' Create an EventLog instance and assign its source.
        Dim myLog As New EventLog()
        myLog.Source = "ThreadException"
        myLog.WriteEntry((errorMsg + ex.Message & ControlChars.Lf & ControlChars.Lf & _
            "Stack Trace:" & ControlChars.Lf & ex.StackTrace))
    Catch exc As Exception
        Try
            MessageBox.Show("Fatal Non-UI Error", "Fatal Non-UI Error. Could not write the error to the event log. " & _
                "Reason: " & exc.Message, MessageBoxButtons.OK, MessageBoxIcon.Stop)
        Finally
            Application.Exit()
        End Try
    End Try
End Sub


' Creates the error message and displays it.
Private Shared Function ShowThreadExceptionDialog(ByVal title As String, ByVal e As Exception) As DialogResult
    Dim errorMsg As String = "An application error occurred. Please contact the adminstrator " & _
 "with the following information:" & ControlChars.Lf & ControlChars.Lf
    errorMsg = errorMsg & e.Message & ControlChars.Lf & _
 ControlChars.Lf & "Stack Trace:" & ControlChars.Lf & e.StackTrace

    Return MessageBox.Show(errorMsg, title, MessageBoxButtons.AbortRetryIgnore, MessageBoxIcon.Stop)
End Function

Açıklamalar

genellikle Windows Forms tarafından oluşan tüm özel durumları yakalamak mümkün değildir. Bu yöntemi kullanarak, uygulamanıza Windows Forms bileşenler tarafından atılan tüm işlenmemiş özel durumları yakalaması ve çalışmaya devam etmesi veya bunları kullanıcıya sunması ve yürütmeyi durdurması gerekip gerekmediğini bildirebilirsiniz.

yöntemini kullanarak uygulamanızın ana biçimini örneklemeden önce çağrısı SetUnhandledExceptionMode yapın Run .

olduğunda threadScopetrue, iş parçacığı özel durum modu ayarlanır. İş parçacığı özel durum modu, olarak ayarlanmadıysa modeAutomaticuygulama özel durum modunu geçersiz kılar.

olduğunda threadScopefalse, uygulama özel durum modu ayarlanır. Uygulama özel durum modu, modu olan Automatic tüm iş parçacıkları için kullanılır. Uygulama özel durum modunun ayarlanması geçerli iş parçacığının ayarını etkilemez.

oluşturulmayan ve Windows Forms sahip olunan iş parçacıklarında oluşan özel durumları yakalamak için olay işleyicisini UnhandledException kullanın.