次の方法で共有


Timer.Stop メソッド

定義

Enabledfalse に設定して、Elapsed イベントの発生を停止します。

public:
 void Stop();
public void Stop ();
member this.Stop : unit -> unit
Public Sub Stop ()

次の例では、 System.Timers.Timer 2 秒 (2,000 ミリ秒) ごとにイベントを Timer.Elapsed 発生させ、イベントのイベント ハンドラーを設定し、タイマーを開始するオブジェクトをインスタンス化します。 イベント ハンドラーは、プロパティが発生するたびに プロパティの値を ElapsedEventArgs.SignalTime 表示します。 ユーザーが Enter キーを押すと、アプリケーションはアプリケーションを Stop 終了する前に メソッドを呼び出します。

using System;
using System.Timers;

public class Example
{
   private static System.Timers.Timer aTimer;
   
   public static void Main()
   {
      SetTimer();

      Console.WriteLine("\nPress the Enter key to exit the application...\n");
      Console.WriteLine("The application started at {0:HH:mm:ss.fff}", DateTime.Now);
      Console.ReadLine();
      aTimer.Stop();
      aTimer.Dispose();
      
      Console.WriteLine("Terminating the application...");
   }

   private static void SetTimer()
   {
        // Create a timer with a two second interval.
        aTimer = new System.Timers.Timer(2000);
        // Hook up the Elapsed event for the timer. 
        aTimer.Elapsed += OnTimedEvent;
        aTimer.AutoReset = true;
        aTimer.Enabled = true;
    }

    private static void OnTimedEvent(Object source, ElapsedEventArgs e)
    {
        Console.WriteLine("The Elapsed event was raised at {0:HH:mm:ss.fff}",
                          e.SignalTime);
    }
}
// The example displays output like the following:
//       Press the Enter key to exit the application...
//
//       The application started at 09:40:29.068
//       The Elapsed event was raised at 09:40:31.084
//       The Elapsed event was raised at 09:40:33.100
//       The Elapsed event was raised at 09:40:35.100
//       The Elapsed event was raised at 09:40:37.116
//       The Elapsed event was raised at 09:40:39.116
//       The Elapsed event was raised at 09:40:41.117
//       The Elapsed event was raised at 09:40:43.132
//       The Elapsed event was raised at 09:40:45.133
//       The Elapsed event was raised at 09:40:47.148
//
//       Terminating the application...
open System
open System.Timers

let onTimedEvent source (e: ElapsedEventArgs) =
    printfn $"""The Elapsed event was raised at {e.SignalTime.ToString "HH:mm:ss.fff"}"""

// Create a timer with a two second interval.
let aTimer = new Timer 2000
// Hook up the Elapsed event for the timer. 
aTimer.Elapsed.AddHandler onTimedEvent
aTimer.AutoReset <- true
aTimer.Enabled <- true

printfn "\nPress the Enter key to exit the application...\n"
printfn $"""The application started at {DateTime.Now.ToString "HH:mm:ss.fff"}"""
stdin.ReadLine() |> ignore
aTimer.Stop()
aTimer.Dispose()

printfn "Terminating the application..."

// The example displays output like the following:
//       Press the Enter key to exit the application...
//
//       The application started at 09:40:29.068
//       The Elapsed event was raised at 09:40:31.084
//       The Elapsed event was raised at 09:40:33.100
//       The Elapsed event was raised at 09:40:35.100
//       The Elapsed event was raised at 09:40:37.116
//       The Elapsed event was raised at 09:40:39.116
//       The Elapsed event was raised at 09:40:41.117
//       The Elapsed event was raised at 09:40:43.132
//       The Elapsed event was raised at 09:40:45.133
//       The Elapsed event was raised at 09:40:47.148
//
//       Terminating the application...
Imports System.Timers

Public Module Example
    Private aTimer As System.Timers.Timer

    Public Sub Main()
        SetTimer()

      Console.WriteLine("{0}Press the Enter key to exit the application...{0}",
                        vbCrLf)
      Console.WriteLine("The application started at {0:HH:mm:ss.fff}",
                        DateTime.Now)
      Console.ReadLine()
      aTimer.Stop()
      aTimer.Dispose()

      Console.WriteLine("Terminating the application...")
    End Sub

    Private Sub SetTimer()
        ' Create a timer with a two second interval.
        aTimer = New System.Timers.Timer(2000)
        ' Hook up the Elapsed event for the timer. 
        AddHandler aTimer.Elapsed, AddressOf OnTimedEvent
        aTimer.AutoReset = True
        aTimer.Enabled = True
    End Sub

    ' The event handler for the Timer.Elapsed event. 
    Private Sub OnTimedEvent(source As Object, e As ElapsedEventArgs)
        Console.WriteLine("The Elapsed event was raised at {0:HH:mm:ss.fff}",
                          e.SignalTime)
    End Sub 
End Module
' The example displays output like the following:
'       Press the Enter key to exit the application...
'
'       The application started at 09:40:29.068
'       The Elapsed event was raised at 09:40:31.084
'       The Elapsed event was raised at 09:40:33.100
'       The Elapsed event was raised at 09:40:35.100
'       The Elapsed event was raised at 09:40:37.116
'       The Elapsed event was raised at 09:40:39.116
'       The Elapsed event was raised at 09:40:41.117
'       The Elapsed event was raised at 09:40:43.132
'       The Elapsed event was raised at 09:40:45.133
'       The Elapsed event was raised at 09:40:47.148
'
'       Terminating the application...

次のコード例を呼び出すスレッドを防ぐために 1 つのメソッドを示しています、Stopメソッドまで、現在の実行を続行できなくElapsedイベント終了すると、2 つの操作を防止するためにもElapsedを同じイベント ハンドラーの実行からのイベント時間 (再入とも呼ばれます)。

この例では、100 個のテスト実行を実行します。 テストが実行されるたびに、タイマーは 150 ミリ秒の間隔で開始されます。 イベント ハンドラーでは、 メソッドを Thread.Sleep 使用して、50 ミリ秒から 200 ミリ秒までの長さがランダムに変化するタスクをシミュレートします。 テスト メソッドは、1 秒間待機してからタイマーを停止するコントロール スレッドも開始します。 コントロール スレッドがタイマーを停止したときにイベントが処理されている場合、コントロール スレッドはイベントが完了するまで待機してから続行する必要があります。

メソッド オーバーロードは Interlocked.CompareExchange(Int32, Int32, Int32) 、再入を回避し、実行中のイベントが終了するまでコントロール スレッドが続行されないようにするために使用されます。 イベント ハンドラーは、 メソッドを CompareExchange(Int32, Int32, Int32) 使用してコントロール変数を 1 に設定しますが、値が現在 0 の場合にのみ使用します。 これはアトミック操作です。 戻り値が 0 の場合、コントロール変数は 1 に設定され、イベント ハンドラーが続行されます。 戻り値が 0 以外の場合、再入を回避するためにイベントは破棄されます。 (すべてのイベントを実行するために必要な場合、Monitorクラスは、イベントを同期するメソッドの向上になります)。イベント ハンドラーの終了時に、設定コントロール変数戻るを 0 にします。 この例では、 メソッドの呼び出し後に実行され、再入のために破棄されたイベントの合計数を Stop 記録します。

コントロール スレッドは、 メソッドを CompareExchange(Int32, Int32, Int32) 使用してコントロール変数を -1 (マイナス 1) に設定しますが、値が現在 0 の場合にのみ使用します。 アトミック操作が 0 以外を返す場合、イベントは現在実行中です。 コントロール スレッドは待機し、もう一度試行します。 この例では、コントロール スレッドがイベントの完了を待機する必要があった回数を記録します。

using System;
using System.Timers;
using System.Threading;

public class Test
{
    // Change these values to control the behavior of the program.
    private static int testRuns = 100;
    // Times are given in milliseconds:
    private static int testRunsFor = 500;
    private static int timerIntervalBase = 100;
    private static int timerIntervalDelta = 20;

    // Timers.
    private static System.Timers.Timer Timer1 = new System.Timers.Timer();
    private static System.Timers.Timer Timer2 = new System.Timers.Timer();
    private static System.Timers.Timer currentTimer = null;

    private static Random rand = new Random();

    // This is the synchronization point that prevents events
    // from running concurrently, and prevents the main thread
    // from executing code after the Stop method until any
    // event handlers are done executing.
    private static int syncPoint = 0;

    // Count the number of times the event handler is called,
    // is executed, is skipped, or is called after Stop.
    private static int numEvents = 0;
    private static int numExecuted = 0;
    private static int numSkipped = 0;
    private static int numLate = 0;

    // Count the number of times the thread that calls Stop
    // has to wait for an Elapsed event to finish.
    private static int numWaits = 0;

    [MTAThread]
    public static void Main()
    {
        Timer1.Elapsed += new ElapsedEventHandler(Timer1_ElapsedEventHandler);
        Timer2.Elapsed += new ElapsedEventHandler(Timer2_ElapsedEventHandler);

        Console.WriteLine();
        for(int i = 1; i <= testRuns; i++)
        {
            TestRun();
            Console.Write("\rTest {0}/{1}    ", i, testRuns);
        }

        Console.WriteLine("{0} test runs completed.", testRuns);
        Console.WriteLine("{0} events were raised.", numEvents);
        Console.WriteLine("{0} events executed.", numExecuted);
        Console.WriteLine("{0} events were skipped for concurrency.", numSkipped);
        Console.WriteLine("{0} events were skipped because they were late.", numLate);
        Console.WriteLine("Control thread waited {0} times for an event to complete.", numWaits);
    }

    public static void TestRun()
    {
        // Set syncPoint to zero before starting the test
        // run.
        syncPoint = 0;

        // Test runs alternate between Timer1 and Timer2, to avoid
        // race conditions between tests, or with very late events.
        if (currentTimer == Timer1)
            currentTimer = Timer2;
        else
            currentTimer = Timer1;

        currentTimer.Interval = timerIntervalBase
            - timerIntervalDelta + rand.Next(timerIntervalDelta * 2);
        currentTimer.Enabled = true;

        // Start the control thread that shuts off the timer.
        Thread t = new Thread(ControlThreadProc);
        t.Start();

        // Wait until the control thread is done before proceeding.
        // This keeps the test runs from overlapping.
        t.Join();
    }

    private static void ControlThreadProc()
    {
        // Allow the timer to run for a period of time, and then
        // stop it.
        Thread.Sleep(testRunsFor);
        currentTimer.Stop();

        // The 'counted' flag ensures that if this thread has
        // to wait for an event to finish, the wait only gets
        // counted once.
        bool counted = false;

        // Ensure that if an event is currently executing,
        // no further processing is done on this thread until
        // the event handler is finished. This is accomplished
        // by using CompareExchange to place -1 in syncPoint,
        // but only if syncPoint is currently zero (specified
        // by the third parameter of CompareExchange).
        // CompareExchange returns the original value that was
        // in syncPoint. If it was not zero, then there's an
        // event handler running, and it is necessary to try
        // again.
        while (Interlocked.CompareExchange(ref syncPoint, -1, 0) != 0)
        {
            // Give up the rest of this thread's current time
            // slice. This is a naive algorithm for yielding.
            Thread.Sleep(1);

            // Tally a wait, but don't count multiple calls to
            // Thread.Sleep.
            if (!counted)
            {
                numWaits += 1;
                counted = true;
            }
        }

        // Any processing done after this point does not conflict
        // with timer events. This is the purpose of the call to
        // CompareExchange. If the processing done here would not
        // cause a problem when run concurrently with timer events,
        // then there is no need for the extra synchronization.
    }

    // Event-handling methods for the Elapsed events of the two
    // timers.
    //
    private static void Timer1_ElapsedEventHandler(object sender,
        ElapsedEventArgs e)
    {
        HandleElapsed(sender, e);
    }

    private static void Timer2_ElapsedEventHandler(object sender,
        ElapsedEventArgs e)
    {
        HandleElapsed(sender, e);
    }

    private static void HandleElapsed(object sender, ElapsedEventArgs e)
    {
        numEvents += 1;

        // This example assumes that overlapping events can be
        // discarded. That is, if an Elapsed event is raised before
        // the previous event is finished processing, the second
        // event is ignored.
        //
        // CompareExchange is used to take control of syncPoint,
        // and to determine whether the attempt was successful.
        // CompareExchange attempts to put 1 into syncPoint, but
        // only if the current value of syncPoint is zero
        // (specified by the third parameter). If another thread
        // has set syncPoint to 1, or if the control thread has
        // set syncPoint to -1, the current event is skipped.
        // (Normally it would not be necessary to use a local
        // variable for the return value. A local variable is
        // used here to determine the reason the event was
        // skipped.)
        //
        int sync = Interlocked.CompareExchange(ref syncPoint, 1, 0);
        if (sync == 0)
        {
            // No other event was executing.
            // The event handler simulates an amount of work
            // lasting between 50 and 200 milliseconds, so that
            // some events will overlap.
            int delay = timerIntervalBase
                - timerIntervalDelta / 2 + rand.Next(timerIntervalDelta);
            Thread.Sleep(delay);
            numExecuted += 1;

            // Release control of syncPoint.
            syncPoint = 0;
        }
        else
        {
            if (sync == 1) { numSkipped += 1; } else { numLate += 1; }
        }
    }
}

/* On a dual-processor computer, this code example produces
   results similar to the following:

Test 100/100    100 test runs completed.
436 events were raised.
352 events executed.
84 events were skipped for concurrency.
0 events were skipped because they were late.
Control thread waited 77 times for an event to complete.
 */
open System
open System.Threading

// Change these values to control the behavior of the program.
let testRuns = 100
// Times are given in milliseconds:
let testRunsFor = 500
let timerIntervalBase = 100
let timerIntervalDelta = 20

// Timers.
let timer1 = new Timers.Timer()
let timer2 = new Timers.Timer()
let mutable currentTimer = Unchecked.defaultof<Timers.Timer>

let rand = Random()

// This is the synchronization point that prevents events
// from running concurrently, and prevents the main thread
// from executing code after the Stop method until any
// event handlers are done executing.
let mutable syncPoint = 0

// Count the number of times the event handler is called,
// is executed, is skipped, or is called after Stop.
let mutable numEvents = 0
let mutable numExecuted = 0
let mutable numSkipped = 0
let mutable numLate = 0

// Count the number of times the thread that calls Stop
// has to wait for an Elapsed event to finish.
let mutable numWaits = 0

let controlThreadProc () =
    // Allow the timer to run for a period of time, and then
    // stop it.
    Thread.Sleep testRunsFor
    currentTimer.Stop()

    // The 'counted' flag ensures that if this thread has
    // to wait for an event to finish, the wait only gets
    // counted once.
    let mutable counted = false

    // Ensure that if an event is currently executing,
    // no further processing is done on this thread until
    // the event handler is finished. This is accomplished
    // by using CompareExchange to place -1 in syncPoint,
    // but only if syncPoint is currently zero (specified
    // by the third parameter of CompareExchange).
    // CompareExchange returns the original value that was
    // in syncPoint. If it was not zero, then there's an
    // event handler running, and it is necessary to try
    // again.
    while Interlocked.CompareExchange(&syncPoint, -1, 0) <> 0 do
        // Give up the rest of this thread's current time
        // slice. This is a naive algorithm for yielding.
        Thread.Sleep 1

        // Tally a wait, but don't count multiple calls to
        // Thread.Sleep.
        if not counted then
            numWaits <- numWaits + 1
            counted <- true

// Any processing done after this point does not conflict
// with timer events. This is the purpose of the call to
// CompareExchange. If the processing done here would not
// cause a problem when run concurrently with timer events,
// then there is no need for the extra synchronization.

let testRun () =
    // Set syncPoint to zero before starting the test
    // run.
    syncPoint <- 0

    // Test runs alternate between Timer1 and Timer2, to avoid
    // race conditions between tests, or with very late events.
    if currentTimer = timer1 then
        currentTimer <- timer2
    else
        currentTimer <- timer1

    currentTimer.Interval <-
        timerIntervalBase - timerIntervalDelta + (timerIntervalDelta * 2 |> rand.Next)
        |> float

    currentTimer.Enabled <- true

    // Start the control thread that shuts off the timer.
    let t = new Thread(ThreadStart controlThreadProc)
    t.Start()

    // Wait until the control thread is done before proceeding.
    // This keeps the test runs from overlapping.
    t.Join()

let handleElapsed sender e =
    numEvents <- numEvents + 1

    // This example assumes that overlapping events can be
    // discarded. That is, if an Elapsed event is raised before
    // the previous event is finished processing, the second
    // event is ignored.
    //
    // CompareExchange is used to take control of syncPoint,
    // and to determine whether the attempt was successful.
    // CompareExchange attempts to put 1 into syncPoint, but
    // only if the current value of syncPoint is zero
    // (specified by the third parameter). If another thread
    // has set syncPoint to 1, or if the control thread has
    // set syncPoint to -1, the current event is skipped.
    // (Normally it would not be necessary to use a local
    // variable for the return value. A local variable is
    // used here to determine the reason the event was
    // skipped.)
    //
    let sync = Interlocked.CompareExchange(&syncPoint, 1, 0)

    if sync = 0 then
        // No other event was executing.
        // The event handler simulates an amount of work
        // lasting between 50 and 200 milliseconds, so that
        // some events will overlap.
        timerIntervalBase - timerIntervalDelta / 2 + rand.Next timerIntervalDelta
        |> Thread.Sleep

        numExecuted <- numExecuted + 1

        // Release control of syncPoint.
        syncPoint <- 0
    else if sync = 1 then
        numSkipped <- numSkipped + 1
    else
        numLate <- numLate + 1


// Event-handling methods for the Elapsed events of the two
// timers.
let timer1_ElapsedEventHandler = handleElapsed

let timer2_ElapsedEventHandler = handleElapsed

[<EntryPoint; MTAThread>]
let main _ =
    timer1.Elapsed.AddHandler timer1_ElapsedEventHandler
    timer2.Elapsed.AddHandler timer2_ElapsedEventHandler

    printfn ""

    for i = 1 to testRuns do
        testRun ()
        printf $"\rTest {i}/{testRuns}    "

    printfn $"{testRuns} test runs completed."
    printfn $"{numEvents} events were raised."
    printfn $"{numExecuted} events executed."
    printfn $"{numSkipped} events were skipped for concurrency."
    printfn $"{numLate} events were skipped because they were late."
    printfn $"Control thread waited {numWaits} times for an event to complete."
    0

// On a dual-processor computer, this code example produces
// results similar to the following:
//     Test 100/100    100 test runs completed.
//     436 events were raised.
//     352 events executed.
//     84 events were skipped for concurrency.
//     0 events were skipped because they were late.
//     Control thread waited 77 times for an event to complete.
Imports System.Timers
Imports System.Threading

Public Module Test
    
    ' Change these values to control the behavior of the program.
    Private testRuns As Integer = 100 
    ' Times are given in milliseconds:
    Private testRunsFor As Integer = 500
    Private timerIntervalBase As Integer = 100
    Private timerIntervalDelta As Integer = 20

    ' Timers.
    Private WithEvents Timer1 As New System.Timers.Timer
    Private WithEvents Timer2 As New System.Timers.Timer
    Private currentTimer As System.Timers.timer

    Private rand As New Random()

    ' This is the synchronization point that prevents events
    ' from running concurrently, and prevents the main thread 
    ' from executing code after the Stop method until any 
    ' event handlers are done executing.
    Private syncPoint As Integer = 0

    ' Count the number of times the event handler is called,
    ' is executed, is skipped, or is called after Stop.
    Private numEvents As Integer = 0
    Private numExecuted As Integer = 0
    Private numSkipped As Integer = 0
    Private numLate As Integer = 0

    ' Count the number of times the thread that calls Stop
    ' has to wait for an Elapsed event to finish.
    Private numWaits As Integer = 0

    <MTAThread> _
    Sub Main()
        Console.WriteLine()
        For i As Integer = 1 To testRuns
            TestRun
            Console.Write(vbCr & "Test {0}/{1}    ", i, testRuns)
        Next

        Console.WriteLine("{0} test runs completed.", testRuns)
        Console.WriteLine("{0} events were raised.", numEvents)
        Console.WriteLine("{0} events executed.", numExecuted)
        Console.WriteLine("{0} events were skipped for concurrency.", numSkipped)
        Console.WriteLine("{0} events were skipped because they were late.", numLate)
        Console.WriteLine("Control thread waited {0} times for an event to complete.", numWaits)
    End Sub

    Sub TestRun()
        ' Set syncPoint to zero before starting the test 
        ' run. 
        syncPoint = 0

        ' Test runs alternate between Timer1 and Timer2, to avoid
        ' race conditions between tests, or with very late events.
        If currentTimer Is Timer1 Then
            currentTimer = Timer2
        Else
            currentTimer = Timer1
        End If

        currentTimer.Interval = timerIntervalBase _
            - timerIntervalDelta + rand.Next(timerIntervalDelta * 2)
        currentTimer.Enabled = True

        ' Start the control thread that shuts off the timer.
        Dim t As New Thread(AddressOf ControlThreadProc)
        t.Start()

        ' Wait until the control thread is done before proceeding.
        ' This keeps the test runs from overlapping.
        t.Join()

    End Sub


    Private Sub ControlThreadProc()
        ' Allow the timer to run for a period of time, and then 
        ' stop it.
        Thread.Sleep(testRunsFor) 
        currentTimer.Stop

        ' The 'counted' flag ensures that if this thread has
        ' to wait for an event to finish, the wait only gets 
        ' counted once.
        Dim counted As Boolean = False

        ' Ensure that if an event is currently executing,
        ' no further processing is done on this thread until
        ' the event handler is finished. This is accomplished
        ' by using CompareExchange to place -1 in syncPoint,
        ' but only if syncPoint is currently zero (specified
        ' by the third parameter of CompareExchange). 
        ' CompareExchange returns the original value that was
        ' in syncPoint. If it was not zero, then there's an
        ' event handler running, and it is necessary to try
        ' again.
        While Interlocked.CompareExchange(syncPoint, -1, 0) <> 0 
            ' Give up the rest of this thread's current time
            ' slice. This is a naive algorithm for yielding.
            Thread.Sleep(1)

            ' Tally a wait, but don't count multiple calls to
            ' Thread.Sleep.
            If Not counted Then
                numWaits += 1
                counted = True
            End If
        End While

        ' Any processing done after this point does not conflict
        ' with timer events. This is the purpose of the call to
        ' CompareExchange. If the processing done here would not
        ' cause a problem when run concurrently with timer events,
        ' then there is no need for the extra synchronization.
    End Sub


    ' Event-handling methods for the Elapsed events of the two
    ' timers.
    '
    Private Sub Timer1_ElapsedEventHandler(ByVal sender As Object, _
        ByVal e As ElapsedEventArgs) Handles Timer1.Elapsed

        HandleElapsed(sender, e)
    End Sub

    Private Sub Timer2_ElapsedEventHandler(ByVal sender As Object, _
        ByVal e As ElapsedEventArgs) Handles Timer2.Elapsed

        HandleElapsed(sender, e)
    End Sub

    Private Sub HandleElapsed(ByVal sender As Object, ByVal e As ElapsedEventArgs)

        numEvents += 1

        ' This example assumes that overlapping events can be
        ' discarded. That is, if an Elapsed event is raised before 
        ' the previous event is finished processing, the second
        ' event is ignored. 
        '
        ' CompareExchange is used to take control of syncPoint, 
        ' and to determine whether the attempt was successful. 
        ' CompareExchange attempts to put 1 into syncPoint, but
        ' only if the current value of syncPoint is zero 
        ' (specified by the third parameter). If another thread
        ' has set syncPoint to 1, or if the control thread has
        ' set syncPoint to -1, the current event is skipped. 
        ' (Normally it would not be necessary to use a local 
        ' variable for the return value. A local variable is 
        ' used here to determine the reason the event was 
        ' skipped.)
        '
        Dim sync As Integer = Interlocked.CompareExchange(syncPoint, 1, 0)
        If sync = 0 Then
            ' No other event was executing.
            ' The event handler simulates an amount of work
            ' similar to the time between events, so that
            ' some events will overlap.
            Dim delay As Integer = timerIntervalBase _
                - timerIntervalDelta / 2 + rand.Next(timerIntervalDelta)
            Thread.Sleep(delay)
            numExecuted += 1

            ' Release control of syncPoint.
            syncPoint = 0
        Else
            If sync = 1 Then numSkipped += 1 Else numLate += 1
        End If
    End Sub 

End Module

' On a dual-processor computer, this code example produces
' results similar to the following:
'
'Test 100/100    100 test runs completed.
'436 events were raised.
'352 events executed.
'84 events were skipped for concurrency.
'0 events were skipped because they were late.
'Control thread waited 77 times for an event to complete.

注釈

を に設定 Enabled してタイミングを false停止することもできます。

Note

イベントを発生 Elapsed させるシグナルは常にスレッドで実行するためにキューに ThreadPool 入れられます。そのため、イベント処理メソッドは、メソッドの呼び出しが別のスレッドで実行されるのと同時に Stop 、あるスレッドで実行される可能性があります。 これにより、 メソッドが Elapsed 呼び出された後にイベントが発生する Stop 可能性があります。 「例」セクションの 2 番目のコード例は、この競合状態を回避する方法の 1 つを示しています。

適用対象

こちらもご覧ください