CustomAttributeData.GetCustomAttributes Méthode

Définition

Retourne une liste d'objets CustomAttributeData représentant des données relatives aux attributs qui ont été appliqués à la cible.

Surcharges

GetCustomAttributes(Assembly)

Renvoie une liste d’objets CustomAttributeData représentant des données sur les attributs qui ont été appliqués à l’assembly cible.

GetCustomAttributes(MemberInfo)

Renvoie une liste d’objets CustomAttributeData représentant des données sur les attributs qui ont été appliqués au membre cible.

GetCustomAttributes(Module)

Renvoie une liste d’objets CustomAttributeData représentant des données sur les attributs qui ont été appliqués au module cible.

GetCustomAttributes(ParameterInfo)

Retourne une liste d’objets CustomAttributeData représentant des données sur les attributs qui ont été appliqués au paramètre cible.

GetCustomAttributes(Assembly)

Source:
CustomAttributeData.cs
Source:
CustomAttributeData.cs
Source:
CustomAttributeData.cs

Renvoie une liste d’objets CustomAttributeData représentant des données sur les attributs qui ont été appliqués à l’assembly cible.

public:
 static System::Collections::Generic::IList<System::Reflection::CustomAttributeData ^> ^ GetCustomAttributes(System::Reflection::Assembly ^ target);
public static System.Collections.Generic.IList<System.Reflection.CustomAttributeData> GetCustomAttributes (System.Reflection.Assembly target);
static member GetCustomAttributes : System.Reflection.Assembly -> System.Collections.Generic.IList<System.Reflection.CustomAttributeData>
Public Shared Function GetCustomAttributes (target As Assembly) As IList(Of CustomAttributeData)

Paramètres

target
Assembly

L’assembly dont les données d’attribut personnalisé doivent être récupérées.

Retours

Liste d’objets représentant des données sur les attributs qui ont été appliqués à l’assembly cible.

Exceptions

target a la valeur null.

Exemples

L’exemple suivant définit un attribut personnalisé avec quatre constructeurs et quatre propriétés. Deux des propriétés sont en lecture seule et sont définies à l’aide des paramètres positionnels des constructeurs. Les deux autres propriétés sont en lecture/écriture et peuvent être définies uniquement à l’aide d’arguments nommés. Une propriété positionnelle est un tableau de chaînes, et une propriété nommée est un tableau d’entiers.

L’attribut est appliqué à l’assembly, à un type déclaré dans l’assembly, à une méthode du type, et à un paramètre de la méthode. Différents constructeurs sont utilisés pour ces cas. Lorsqu’il est exécuté, l’assembly se charge lui-même dans le contexte de réflexion uniquement et affiche les attributs personnalisés.

L’attribut appliqué au type illustre les propriétés du tableau, avec des arguments positionnels et nommés.

La GetCustomAttributes méthode est utilisée dans Main() pour obtenir les attributs personnalisés appliqués à l’assembly. La valeur de retour de la méthode est passée à la ShowAttributeData méthode .

using namespace System;
using namespace System::Reflection;
using namespace System::Collections::Generic;
using namespace System::Collections::ObjectModel;

// An enumeration used by the ExampleAttribute class.
public enum class ExampleKind
{
   FirstKind, SecondKind, ThirdKind, FourthKind
};

// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets::All)]
public ref class ExampleAttribute: public Attribute
{
private:
   // Data for properties.
   ExampleKind kindValue;
   String^ noteValue;
   array<String^>^ arrayStrings;
   array<int>^ arrayNumbers;

   // Constructors. 
   void ExampleAttributeInitialize( ExampleKind initKind, array<String^>^ initStrings )
   {
      kindValue = initKind;
      arrayStrings = initStrings;
   }
public:
   ExampleAttribute()
   {
      ExampleAttributeInitialize( ExampleKind::FirstKind, nullptr );
   }
   ExampleAttribute( ExampleKind initKind )
   {
      ExampleAttributeInitialize( initKind, nullptr );
   }
   ExampleAttribute( ExampleKind initKind, array<String^>^ initStrings )
   {
      ExampleAttributeInitialize( initKind, initStrings );
   }

   // Properties. The Note and Numbers properties must be read/write, so they
   // can be used as named parameters.
   //
   property ExampleKind Kind 
   {
      ExampleKind get()
      {
         return kindValue;
      }
   }
   property array<String^>^ Strings
   {
      array<String^>^ get()
      {
         return arrayStrings;
      }
   }
   property String^ Note 
   {
      String^ get()
      {
         return noteValue;
      }

      void set( String^ value )
      {
         noteValue = value;
      }
   }
   property array<int>^ Numbers
   {
      array<int>^ get()
      {
         return arrayNumbers;
      }

      void set( array<int>^ value )
      {
         arrayNumbers = value;
      }
   }
};

// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind::ThirdKind,Note="This is a note on the assembly.")];

// The example attribute is applied to the test class.
//
[Example(ExampleKind::SecondKind, 
         gcnew array<String^> { "String array argument, line 1", 
                        "String array argument, line 2", 
                        "String array argument, line 3" }, 
         Note="This is a note on the class.",
         Numbers = gcnew array<int> { 53, 57, 59 })] 
public ref class Test
{
public:
   // The example attribute is applied to a method, using the
   // parameterless constructor and supplying a named argument.
   // The attribute is also applied to the method parameter.
   //
   [Example(Note="This is a note on a method.")]
   void TestMethod( [Example] Object^ arg ){}

   // Main() gets objects representing the assembly, the test
   // type, the test method, and the method parameter. Custom
   // attribute data is displayed for each of these.
   //
   static void Main()
   {
      Assembly^ assembly = Assembly::ReflectionOnlyLoad( "Source" );
      Type^ t = assembly->GetType( "Test" );
      MethodInfo^ m = t->GetMethod( "TestMethod" );
      array<ParameterInfo^>^p = m->GetParameters();

      Console::WriteLine( "\r\nAttributes for assembly: '{0}'", assembly );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( assembly ) );
      Console::WriteLine( "\r\nAttributes for type: '{0}'", t );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( t ) );
      Console::WriteLine( "\r\nAttributes for member: '{0}'", m );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( m ) );
      Console::WriteLine( "\r\nAttributes for parameter: '{0}'", p );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( p[ 0 ] ) );
   }

private:
    static void ShowValueOrArray(CustomAttributeTypedArgument^ cata)
    {
        if (cata->Value->GetType() == ReadOnlyCollection<CustomAttributeTypedArgument>::typeid)
        {
            Console::WriteLine("         Array of '{0}':", cata->ArgumentType);

            for each (CustomAttributeTypedArgument^ cataElement in 
                (ReadOnlyCollection<CustomAttributeTypedArgument>^) cata->Value)
            {
                Console::WriteLine("             Type: '{0}'  Value: '{1}'",
                    cataElement->ArgumentType, cataElement->Value);
            }
        }
        else
        {
            Console::WriteLine( "         Type: '{0}'  Value: '{1}'",
               cata->ArgumentType, cata->Value );
        }
    }

   static void ShowAttributeData( IList< CustomAttributeData^ >^ attributes )
   {
      for each ( CustomAttributeData^ cad in attributes )
      {
         Console::WriteLine( "   {0}", cad );
         Console::WriteLine( "      Constructor: '{0}'", cad->Constructor );

         Console::WriteLine( "      Constructor arguments:" );
         for each ( CustomAttributeTypedArgument^ cata in cad->ConstructorArguments )
         {
            ShowValueOrArray(cata);
         }

         Console::WriteLine( "      Named arguments:" );
         for each ( CustomAttributeNamedArgument cana in cad->NamedArguments )
         {
            Console::WriteLine( "         MemberInfo: '{0}'", cana.MemberInfo );
            ShowValueOrArray(cana.TypedValue);
         }
      }
   }
};

int main()
{
   Test::Main();
}

/* This code example produces output similar to the following:

Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
      Constructor: 'Void .ctor(Int32)'
      Constructor arguments:
         Type: 'System.Int32'  Value: '8'
      Named arguments:
   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'Boolean WrapNonExceptionThrows'
         Type: 'System.Boolean'  Value: 'True'
   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
      Constructor: 'Void .ctor(ExampleKind)'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '2'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the assembly.'

Attributes for type: 'Test'
   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
      Constructor: 'Void .ctor(ExampleKind, System.String[])'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '1'
         Array of 'System.String[]':
             Type: 'System.String'  Value: 'String array argument, line 1'
             Type: 'System.String'  Value: 'String array argument, line 2'
             Type: 'System.String'  Value: 'String array argument, line 3'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the class.'
         MemberInfo: 'Int32[] Numbers'
         Array of 'System.Int32[]':
             Type: 'System.Int32'  Value: '53'
             Type: 'System.Int32'  Value: '57'
             Type: 'System.Int32'  Value: '59'

Attributes for member: 'Void TestMethod(System.Object)'
   [ExampleAttribute(Note = "This is a note on a method.")]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on a method.'

Attributes for parameter: 'System.Object arg'
   [ExampleAttribute()]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
*/
using System;
using System.Reflection;
using System.Collections.Generic;
using System.Collections.ObjectModel;

// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind.ThirdKind, Note="This is a note on the assembly.")]

// An enumeration used by the ExampleAttribute class.
public enum ExampleKind
{
    FirstKind,
    SecondKind,
    ThirdKind,
    FourthKind
};

// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets.All)]
public class ExampleAttribute : Attribute
{
    // Data for properties.
    private ExampleKind kindValue;
    private string noteValue;
    private string[] arrayStrings;
    private int[] arrayNumbers;

    // Constructors. The parameterless constructor (.ctor) calls
    // the constructor that specifies ExampleKind and an array of
    // strings, and supplies the default values.
    //
    public ExampleAttribute(ExampleKind initKind, string[] initStrings)
    {
        kindValue = initKind;
        arrayStrings = initStrings;
    }
    public ExampleAttribute(ExampleKind initKind) : this(initKind, null) {}
    public ExampleAttribute() : this(ExampleKind.FirstKind, null) {}

    // Properties. The Note and Numbers properties must be read/write, so they
    // can be used as named parameters.
    //
    public ExampleKind Kind { get { return kindValue; }}
    public string[] Strings { get { return arrayStrings; }}
    public string Note
    {
        get { return noteValue; }
        set { noteValue = value; }
    }
    public int[] Numbers
    {
        get { return arrayNumbers; }
        set { arrayNumbers = value; }
    }
}

// The example attribute is applied to the test class.
//
[Example(ExampleKind.SecondKind,
         new string[] { "String array argument, line 1",
                        "String array argument, line 2",
                        "String array argument, line 3" },
         Note="This is a note on the class.",
         Numbers = new int[] { 53, 57, 59 })]
public class Test
{
    // The example attribute is applied to a method, using the
    // parameterless constructor and supplying a named argument.
    // The attribute is also applied to the method parameter.
    //
    [Example(Note="This is a note on a method.")]
    public void TestMethod([Example] object arg) { }

    // Main() gets objects representing the assembly, the test
    // type, the test method, and the method parameter. Custom
    // attribute data is displayed for each of these.
    //
    public static void Main()
    {
        Assembly asm = Assembly.ReflectionOnlyLoad("Source");
        Type t = asm.GetType("Test");
        MethodInfo m = t.GetMethod("TestMethod");
        ParameterInfo[] p = m.GetParameters();

        Console.WriteLine("\r\nAttributes for assembly: '{0}'", asm);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm));
        Console.WriteLine("\r\nAttributes for type: '{0}'", t);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t));
        Console.WriteLine("\r\nAttributes for member: '{0}'", m);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m));
        Console.WriteLine("\r\nAttributes for parameter: '{0}'", p);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p[0]));
    }

    private static void ShowAttributeData(
        IList<CustomAttributeData> attributes)
    {
        foreach( CustomAttributeData cad in attributes )
        {
            Console.WriteLine("   {0}", cad);
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor);

            Console.WriteLine("      Constructor arguments:");
            foreach( CustomAttributeTypedArgument cata
                in cad.ConstructorArguments )
            {
                ShowValueOrArray(cata);
            }

            Console.WriteLine("      Named arguments:");
            foreach( CustomAttributeNamedArgument cana
                in cad.NamedArguments )
            {
                Console.WriteLine("         MemberInfo: '{0}'",
                    cana.MemberInfo);
                ShowValueOrArray(cana.TypedValue);
            }
        }
    }

    private static void ShowValueOrArray(CustomAttributeTypedArgument cata)
    {
        if (cata.Value.GetType() == typeof(ReadOnlyCollection<CustomAttributeTypedArgument>))
        {
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType);

            foreach (CustomAttributeTypedArgument cataElement in
                (ReadOnlyCollection<CustomAttributeTypedArgument>) cata.Value)
            {
                Console.WriteLine("             Type: '{0}'  Value: '{1}'",
                    cataElement.ArgumentType, cataElement.Value);
            }
        }
        else
        {
            Console.WriteLine("         Type: '{0}'  Value: '{1}'",
                cata.ArgumentType, cata.Value);
        }
    }
}

/* This code example produces output similar to the following:

Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
      Constructor: 'Void .ctor(Int32)'
      Constructor arguments:
         Type: 'System.Int32'  Value: '8'
      Named arguments:
   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'Boolean WrapNonExceptionThrows'
         Type: 'System.Boolean'  Value: 'True'
   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
      Constructor: 'Void .ctor(ExampleKind)'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '2'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the assembly.'

Attributes for type: 'Test'
   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
      Constructor: 'Void .ctor(ExampleKind, System.String[])'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '1'
         Array of 'System.String[]':
             Type: 'System.String'  Value: 'String array argument, line 1'
             Type: 'System.String'  Value: 'String array argument, line 2'
             Type: 'System.String'  Value: 'String array argument, line 3'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the class.'
         MemberInfo: 'Int32[] Numbers'
         Array of 'System.Int32[]':
             Type: 'System.Int32'  Value: '53'
             Type: 'System.Int32'  Value: '57'
             Type: 'System.Int32'  Value: '59'

Attributes for member: 'Void TestMethod(System.Object)'
   [ExampleAttribute(Note = "This is a note on a method.")]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on a method.'

Attributes for parameter: 'System.Object arg'
   [ExampleAttribute()]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
*/
Imports System.Reflection
Imports System.Collections.Generic
Imports System.Collections.ObjectModel

' The example attribute is applied to the assembly.
<Assembly:Example(ExampleKind.ThirdKind, Note:="This is a note on the assembly.")>

' An enumeration used by the ExampleAttribute class.
Public Enum ExampleKind
    FirstKind
    SecondKind
    ThirdKind
    FourthKind
End Enum

' An example attribute. The attribute can be applied to all
' targets, from assemblies to parameters.
'
<AttributeUsage(AttributeTargets.All)> _
Public Class ExampleAttribute
    Inherits Attribute

    ' Data for properties.
    Private kindValue As ExampleKind
    Private noteValue As String
    Private arrayStrings() As String
    Private arrayNumbers() As Integer

    ' Constructors. The parameterless constructor (.ctor) calls
    ' the constructor that specifies ExampleKind and an array of
    ' strings, and supplies the default values.
    '
    Public Sub New(ByVal initKind As ExampleKind, ByVal initStrings() As String)
        kindValue = initKind
        arrayStrings = initStrings
    End Sub
    Public Sub New(ByVal initKind As ExampleKind)
        Me.New(initKind, Nothing)
    End Sub
    Public Sub New()
        Me.New(ExampleKind.FirstKind, Nothing)
    End Sub

    ' Properties. The Note and Numbers properties must be read/write, so they 
    ' can be used as named parameters.
    '
    Public ReadOnly Property Kind As ExampleKind
        Get
            Return kindValue 
        End Get
    End Property
    Public ReadOnly Property Strings As String()
        Get
            Return arrayStrings 
        End Get
    End Property
    Public Property Note As String
        Get
            Return noteValue 
        End Get
        Set
            noteValue = value
        End Set
    End Property
    Public Property Numbers As Integer()
        Get
            Return arrayNumbers 
        End Get
        Set
            arrayNumbers = value
        End Set
    End Property
End Class

' The example attribute is applied to the test class.
'
<Example(ExampleKind.SecondKind, _
         New String() { "String array argument, line 1", _
                        "String array argument, line 2", _
                        "String array argument, line 3" }, _
         Note := "This is a note on the class.", _
         Numbers := New Integer() { 53, 57, 59 })> _
Public Class Test
    ' The example attribute is applied to a method, using the
    ' parameterless constructor and supplying a named argument.
    ' The attribute is also applied to the method parameter.
    '
    <Example(Note:="This is a note on a method.")> _
    Public Sub TestMethod(<Example()> ByVal arg As Object)
    End Sub

    ' Sub Main gets objects representing the assembly, the test
    ' type, the test method, and the method parameter. Custom
    ' attribute data is displayed for each of these.
    '
    Public Shared Sub Main()
        Dim asm As [Assembly] = Assembly.ReflectionOnlyLoad("source")
        Dim t As Type = asm.GetType("Test")
        Dim m As MethodInfo = t.GetMethod("TestMethod")
        Dim p() As ParameterInfo = m.GetParameters()

        Console.WriteLine(vbCrLf & "Attributes for assembly: '{0}'", asm)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm))
        Console.WriteLine(vbCrLf & "Attributes for type: '{0}'", t)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t))
        Console.WriteLine(vbCrLf & "Attributes for member: '{0}'", m)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m))
        Console.WriteLine(vbCrLf & "Attributes for parameter: '{0}'", p)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p(0)))
    End Sub

    Private Shared Sub ShowAttributeData( _
        ByVal attributes As IList(Of CustomAttributeData))

        For Each cad As CustomAttributeData _
            In CType(attributes, IEnumerable(Of CustomAttributeData))

            Console.WriteLine("   {0}", cad)
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor)

            Console.WriteLine("      Constructor arguments:")
            For Each cata As CustomAttributeTypedArgument _
                In CType(cad.ConstructorArguments, IEnumerable(Of CustomAttributeTypedArgument))

                ShowValueOrArray(cata)
            Next

            Console.WriteLine("      Named arguments:")
            For Each cana As CustomAttributeNamedArgument _
                In CType(cad.NamedArguments, IEnumerable(Of CustomAttributeNamedArgument))

                Console.WriteLine("         MemberInfo: '{0}'", _
                    cana.MemberInfo)
                ShowValueOrArray(cana.TypedValue)
            Next
        Next
    End Sub

    Private Shared Sub ShowValueOrArray(ByVal cata As CustomAttributeTypedArgument)
        If cata.Value.GetType() Is GetType(ReadOnlyCollection(Of CustomAttributeTypedArgument)) Then
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType)

            For Each cataElement As CustomAttributeTypedArgument In cata.Value
                Console.WriteLine("             Type: '{0}'  Value: '{1}'", _
                    cataElement.ArgumentType, cataElement.Value)
            Next
        Else
            Console.WriteLine("         Type: '{0}'  Value: '{1}'", _
                cata.ArgumentType, cata.Value)
        End If       
    End Sub
End Class

' This code example produces output similar to the following:
'
'Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
'   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
'      Constructor: 'Void .ctor(Int32)'
'      Constructor arguments:
'         Type: 'System.Int32'  Value: '8'
'      Named arguments:
'   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'Boolean WrapNonExceptionThrows'
'         Type: 'System.Boolean'  Value: 'True'
'   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
'      Constructor: 'Void .ctor(ExampleKind)'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '2'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the assembly.'
'
'Attributes for type: 'Test'
'   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
'      Constructor: 'Void .ctor(ExampleKind, System.String[])'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '1'
'         Array of 'System.String[]':
'             Type: 'System.String'  Value: 'String array argument, line 1'
'             Type: 'System.String'  Value: 'String array argument, line 2'
'             Type: 'System.String'  Value: 'String array argument, line 3'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the class.'
'         MemberInfo: 'Int32[] Numbers'
'         Array of 'System.Int32[]':
'             Type: 'System.Int32'  Value: '53'
'             Type: 'System.Int32'  Value: '57'
'             Type: 'System.Int32'  Value: '59'
'
'Attributes for member: 'Void TestMethod(System.Object)'
'   [ExampleAttribute(Note = "This is a note on a method.")]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on a method.'
'
'Attributes for parameter: 'System.Object arg'
'   [ExampleAttribute()]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:

Remarques

Cette méthode fournit une alternative à la GetCustomAttributes méthode qui peut toujours être utilisée dans le contexte De réflexion uniquement.

Voir aussi

S’applique à

GetCustomAttributes(MemberInfo)

Source:
CustomAttributeData.cs
Source:
CustomAttributeData.cs
Source:
CustomAttributeData.cs

Renvoie une liste d’objets CustomAttributeData représentant des données sur les attributs qui ont été appliqués au membre cible.

public:
 static System::Collections::Generic::IList<System::Reflection::CustomAttributeData ^> ^ GetCustomAttributes(System::Reflection::MemberInfo ^ target);
public static System.Collections.Generic.IList<System.Reflection.CustomAttributeData> GetCustomAttributes (System.Reflection.MemberInfo target);
static member GetCustomAttributes : System.Reflection.MemberInfo -> System.Collections.Generic.IList<System.Reflection.CustomAttributeData>
Public Shared Function GetCustomAttributes (target As MemberInfo) As IList(Of CustomAttributeData)

Paramètres

target
MemberInfo

Le membre dont les données d’attribut doivent être récupérées.

Retours

Liste d’objets représentant des données sur les attributs qui ont été appliqués au membre cible.

Exceptions

target a la valeur null.

Exemples

L’exemple suivant définit un attribut personnalisé avec quatre constructeurs et quatre propriétés. Deux des propriétés sont en lecture seule et sont définies à l’aide des paramètres positionnels des constructeurs. Les deux autres propriétés sont en lecture/écriture et peuvent être définies uniquement à l’aide d’arguments nommés. Une propriété positionnelle est un tableau de chaînes, et une propriété nommée est un tableau d’entiers.

L’attribut est appliqué à l’assembly, à un type déclaré dans l’assembly, à une méthode du type, et à un paramètre de la méthode. Différents constructeurs sont utilisés pour ces cas. Lorsqu’il est exécuté, l’assembly se charge lui-même dans le contexte de réflexion uniquement et affiche les attributs personnalisés.

L’attribut appliqué au type illustre les propriétés du tableau, avec des arguments positionnels et nommés.

La GetCustomAttributes méthode est utilisée dans Main() pour obtenir les attributs personnalisés qui ont été appliqués à un type et à une méthode de test (Type dérive de MemberInfo). La valeur de retour de GetCustomAttributes est passée à la ShowAttributeData méthode .

using namespace System;
using namespace System::Reflection;
using namespace System::Collections::Generic;
using namespace System::Collections::ObjectModel;

// An enumeration used by the ExampleAttribute class.
public enum class ExampleKind
{
   FirstKind, SecondKind, ThirdKind, FourthKind
};

// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets::All)]
public ref class ExampleAttribute: public Attribute
{
private:
   // Data for properties.
   ExampleKind kindValue;
   String^ noteValue;
   array<String^>^ arrayStrings;
   array<int>^ arrayNumbers;

   // Constructors. 
   void ExampleAttributeInitialize( ExampleKind initKind, array<String^>^ initStrings )
   {
      kindValue = initKind;
      arrayStrings = initStrings;
   }
public:
   ExampleAttribute()
   {
      ExampleAttributeInitialize( ExampleKind::FirstKind, nullptr );
   }
   ExampleAttribute( ExampleKind initKind )
   {
      ExampleAttributeInitialize( initKind, nullptr );
   }
   ExampleAttribute( ExampleKind initKind, array<String^>^ initStrings )
   {
      ExampleAttributeInitialize( initKind, initStrings );
   }

   // Properties. The Note and Numbers properties must be read/write, so they
   // can be used as named parameters.
   //
   property ExampleKind Kind 
   {
      ExampleKind get()
      {
         return kindValue;
      }
   }
   property array<String^>^ Strings
   {
      array<String^>^ get()
      {
         return arrayStrings;
      }
   }
   property String^ Note 
   {
      String^ get()
      {
         return noteValue;
      }

      void set( String^ value )
      {
         noteValue = value;
      }
   }
   property array<int>^ Numbers
   {
      array<int>^ get()
      {
         return arrayNumbers;
      }

      void set( array<int>^ value )
      {
         arrayNumbers = value;
      }
   }
};

// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind::ThirdKind,Note="This is a note on the assembly.")];

// The example attribute is applied to the test class.
//
[Example(ExampleKind::SecondKind, 
         gcnew array<String^> { "String array argument, line 1", 
                        "String array argument, line 2", 
                        "String array argument, line 3" }, 
         Note="This is a note on the class.",
         Numbers = gcnew array<int> { 53, 57, 59 })] 
public ref class Test
{
public:
   // The example attribute is applied to a method, using the
   // parameterless constructor and supplying a named argument.
   // The attribute is also applied to the method parameter.
   //
   [Example(Note="This is a note on a method.")]
   void TestMethod( [Example] Object^ arg ){}

   // Main() gets objects representing the assembly, the test
   // type, the test method, and the method parameter. Custom
   // attribute data is displayed for each of these.
   //
   static void Main()
   {
      Assembly^ assembly = Assembly::ReflectionOnlyLoad( "Source" );
      Type^ t = assembly->GetType( "Test" );
      MethodInfo^ m = t->GetMethod( "TestMethod" );
      array<ParameterInfo^>^p = m->GetParameters();

      Console::WriteLine( "\r\nAttributes for assembly: '{0}'", assembly );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( assembly ) );
      Console::WriteLine( "\r\nAttributes for type: '{0}'", t );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( t ) );
      Console::WriteLine( "\r\nAttributes for member: '{0}'", m );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( m ) );
      Console::WriteLine( "\r\nAttributes for parameter: '{0}'", p );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( p[ 0 ] ) );
   }

private:
    static void ShowValueOrArray(CustomAttributeTypedArgument^ cata)
    {
        if (cata->Value->GetType() == ReadOnlyCollection<CustomAttributeTypedArgument>::typeid)
        {
            Console::WriteLine("         Array of '{0}':", cata->ArgumentType);

            for each (CustomAttributeTypedArgument^ cataElement in 
                (ReadOnlyCollection<CustomAttributeTypedArgument>^) cata->Value)
            {
                Console::WriteLine("             Type: '{0}'  Value: '{1}'",
                    cataElement->ArgumentType, cataElement->Value);
            }
        }
        else
        {
            Console::WriteLine( "         Type: '{0}'  Value: '{1}'",
               cata->ArgumentType, cata->Value );
        }
    }

   static void ShowAttributeData( IList< CustomAttributeData^ >^ attributes )
   {
      for each ( CustomAttributeData^ cad in attributes )
      {
         Console::WriteLine( "   {0}", cad );
         Console::WriteLine( "      Constructor: '{0}'", cad->Constructor );

         Console::WriteLine( "      Constructor arguments:" );
         for each ( CustomAttributeTypedArgument^ cata in cad->ConstructorArguments )
         {
            ShowValueOrArray(cata);
         }

         Console::WriteLine( "      Named arguments:" );
         for each ( CustomAttributeNamedArgument cana in cad->NamedArguments )
         {
            Console::WriteLine( "         MemberInfo: '{0}'", cana.MemberInfo );
            ShowValueOrArray(cana.TypedValue);
         }
      }
   }
};

int main()
{
   Test::Main();
}

/* This code example produces output similar to the following:

Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
      Constructor: 'Void .ctor(Int32)'
      Constructor arguments:
         Type: 'System.Int32'  Value: '8'
      Named arguments:
   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'Boolean WrapNonExceptionThrows'
         Type: 'System.Boolean'  Value: 'True'
   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
      Constructor: 'Void .ctor(ExampleKind)'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '2'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the assembly.'

Attributes for type: 'Test'
   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
      Constructor: 'Void .ctor(ExampleKind, System.String[])'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '1'
         Array of 'System.String[]':
             Type: 'System.String'  Value: 'String array argument, line 1'
             Type: 'System.String'  Value: 'String array argument, line 2'
             Type: 'System.String'  Value: 'String array argument, line 3'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the class.'
         MemberInfo: 'Int32[] Numbers'
         Array of 'System.Int32[]':
             Type: 'System.Int32'  Value: '53'
             Type: 'System.Int32'  Value: '57'
             Type: 'System.Int32'  Value: '59'

Attributes for member: 'Void TestMethod(System.Object)'
   [ExampleAttribute(Note = "This is a note on a method.")]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on a method.'

Attributes for parameter: 'System.Object arg'
   [ExampleAttribute()]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
*/
using System;
using System.Reflection;
using System.Collections.Generic;
using System.Collections.ObjectModel;

// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind.ThirdKind, Note="This is a note on the assembly.")]

// An enumeration used by the ExampleAttribute class.
public enum ExampleKind
{
    FirstKind,
    SecondKind,
    ThirdKind,
    FourthKind
};

// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets.All)]
public class ExampleAttribute : Attribute
{
    // Data for properties.
    private ExampleKind kindValue;
    private string noteValue;
    private string[] arrayStrings;
    private int[] arrayNumbers;

    // Constructors. The parameterless constructor (.ctor) calls
    // the constructor that specifies ExampleKind and an array of
    // strings, and supplies the default values.
    //
    public ExampleAttribute(ExampleKind initKind, string[] initStrings)
    {
        kindValue = initKind;
        arrayStrings = initStrings;
    }
    public ExampleAttribute(ExampleKind initKind) : this(initKind, null) {}
    public ExampleAttribute() : this(ExampleKind.FirstKind, null) {}

    // Properties. The Note and Numbers properties must be read/write, so they
    // can be used as named parameters.
    //
    public ExampleKind Kind { get { return kindValue; }}
    public string[] Strings { get { return arrayStrings; }}
    public string Note
    {
        get { return noteValue; }
        set { noteValue = value; }
    }
    public int[] Numbers
    {
        get { return arrayNumbers; }
        set { arrayNumbers = value; }
    }
}

// The example attribute is applied to the test class.
//
[Example(ExampleKind.SecondKind,
         new string[] { "String array argument, line 1",
                        "String array argument, line 2",
                        "String array argument, line 3" },
         Note="This is a note on the class.",
         Numbers = new int[] { 53, 57, 59 })]
public class Test
{
    // The example attribute is applied to a method, using the
    // parameterless constructor and supplying a named argument.
    // The attribute is also applied to the method parameter.
    //
    [Example(Note="This is a note on a method.")]
    public void TestMethod([Example] object arg) { }

    // Main() gets objects representing the assembly, the test
    // type, the test method, and the method parameter. Custom
    // attribute data is displayed for each of these.
    //
    public static void Main()
    {
        Assembly asm = Assembly.ReflectionOnlyLoad("Source");
        Type t = asm.GetType("Test");
        MethodInfo m = t.GetMethod("TestMethod");
        ParameterInfo[] p = m.GetParameters();

        Console.WriteLine("\r\nAttributes for assembly: '{0}'", asm);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm));
        Console.WriteLine("\r\nAttributes for type: '{0}'", t);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t));
        Console.WriteLine("\r\nAttributes for member: '{0}'", m);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m));
        Console.WriteLine("\r\nAttributes for parameter: '{0}'", p);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p[0]));
    }

    private static void ShowAttributeData(
        IList<CustomAttributeData> attributes)
    {
        foreach( CustomAttributeData cad in attributes )
        {
            Console.WriteLine("   {0}", cad);
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor);

            Console.WriteLine("      Constructor arguments:");
            foreach( CustomAttributeTypedArgument cata
                in cad.ConstructorArguments )
            {
                ShowValueOrArray(cata);
            }

            Console.WriteLine("      Named arguments:");
            foreach( CustomAttributeNamedArgument cana
                in cad.NamedArguments )
            {
                Console.WriteLine("         MemberInfo: '{0}'",
                    cana.MemberInfo);
                ShowValueOrArray(cana.TypedValue);
            }
        }
    }

    private static void ShowValueOrArray(CustomAttributeTypedArgument cata)
    {
        if (cata.Value.GetType() == typeof(ReadOnlyCollection<CustomAttributeTypedArgument>))
        {
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType);

            foreach (CustomAttributeTypedArgument cataElement in
                (ReadOnlyCollection<CustomAttributeTypedArgument>) cata.Value)
            {
                Console.WriteLine("             Type: '{0}'  Value: '{1}'",
                    cataElement.ArgumentType, cataElement.Value);
            }
        }
        else
        {
            Console.WriteLine("         Type: '{0}'  Value: '{1}'",
                cata.ArgumentType, cata.Value);
        }
    }
}

/* This code example produces output similar to the following:

Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
      Constructor: 'Void .ctor(Int32)'
      Constructor arguments:
         Type: 'System.Int32'  Value: '8'
      Named arguments:
   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'Boolean WrapNonExceptionThrows'
         Type: 'System.Boolean'  Value: 'True'
   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
      Constructor: 'Void .ctor(ExampleKind)'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '2'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the assembly.'

Attributes for type: 'Test'
   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
      Constructor: 'Void .ctor(ExampleKind, System.String[])'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '1'
         Array of 'System.String[]':
             Type: 'System.String'  Value: 'String array argument, line 1'
             Type: 'System.String'  Value: 'String array argument, line 2'
             Type: 'System.String'  Value: 'String array argument, line 3'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the class.'
         MemberInfo: 'Int32[] Numbers'
         Array of 'System.Int32[]':
             Type: 'System.Int32'  Value: '53'
             Type: 'System.Int32'  Value: '57'
             Type: 'System.Int32'  Value: '59'

Attributes for member: 'Void TestMethod(System.Object)'
   [ExampleAttribute(Note = "This is a note on a method.")]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on a method.'

Attributes for parameter: 'System.Object arg'
   [ExampleAttribute()]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
*/
Imports System.Reflection
Imports System.Collections.Generic
Imports System.Collections.ObjectModel

' The example attribute is applied to the assembly.
<Assembly:Example(ExampleKind.ThirdKind, Note:="This is a note on the assembly.")>

' An enumeration used by the ExampleAttribute class.
Public Enum ExampleKind
    FirstKind
    SecondKind
    ThirdKind
    FourthKind
End Enum

' An example attribute. The attribute can be applied to all
' targets, from assemblies to parameters.
'
<AttributeUsage(AttributeTargets.All)> _
Public Class ExampleAttribute
    Inherits Attribute

    ' Data for properties.
    Private kindValue As ExampleKind
    Private noteValue As String
    Private arrayStrings() As String
    Private arrayNumbers() As Integer

    ' Constructors. The parameterless constructor (.ctor) calls
    ' the constructor that specifies ExampleKind and an array of
    ' strings, and supplies the default values.
    '
    Public Sub New(ByVal initKind As ExampleKind, ByVal initStrings() As String)
        kindValue = initKind
        arrayStrings = initStrings
    End Sub
    Public Sub New(ByVal initKind As ExampleKind)
        Me.New(initKind, Nothing)
    End Sub
    Public Sub New()
        Me.New(ExampleKind.FirstKind, Nothing)
    End Sub

    ' Properties. The Note and Numbers properties must be read/write, so they 
    ' can be used as named parameters.
    '
    Public ReadOnly Property Kind As ExampleKind
        Get
            Return kindValue 
        End Get
    End Property
    Public ReadOnly Property Strings As String()
        Get
            Return arrayStrings 
        End Get
    End Property
    Public Property Note As String
        Get
            Return noteValue 
        End Get
        Set
            noteValue = value
        End Set
    End Property
    Public Property Numbers As Integer()
        Get
            Return arrayNumbers 
        End Get
        Set
            arrayNumbers = value
        End Set
    End Property
End Class

' The example attribute is applied to the test class.
'
<Example(ExampleKind.SecondKind, _
         New String() { "String array argument, line 1", _
                        "String array argument, line 2", _
                        "String array argument, line 3" }, _
         Note := "This is a note on the class.", _
         Numbers := New Integer() { 53, 57, 59 })> _
Public Class Test
    ' The example attribute is applied to a method, using the
    ' parameterless constructor and supplying a named argument.
    ' The attribute is also applied to the method parameter.
    '
    <Example(Note:="This is a note on a method.")> _
    Public Sub TestMethod(<Example()> ByVal arg As Object)
    End Sub

    ' Sub Main gets objects representing the assembly, the test
    ' type, the test method, and the method parameter. Custom
    ' attribute data is displayed for each of these.
    '
    Public Shared Sub Main()
        Dim asm As [Assembly] = Assembly.ReflectionOnlyLoad("source")
        Dim t As Type = asm.GetType("Test")
        Dim m As MethodInfo = t.GetMethod("TestMethod")
        Dim p() As ParameterInfo = m.GetParameters()

        Console.WriteLine(vbCrLf & "Attributes for assembly: '{0}'", asm)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm))
        Console.WriteLine(vbCrLf & "Attributes for type: '{0}'", t)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t))
        Console.WriteLine(vbCrLf & "Attributes for member: '{0}'", m)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m))
        Console.WriteLine(vbCrLf & "Attributes for parameter: '{0}'", p)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p(0)))
    End Sub

    Private Shared Sub ShowAttributeData( _
        ByVal attributes As IList(Of CustomAttributeData))

        For Each cad As CustomAttributeData _
            In CType(attributes, IEnumerable(Of CustomAttributeData))

            Console.WriteLine("   {0}", cad)
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor)

            Console.WriteLine("      Constructor arguments:")
            For Each cata As CustomAttributeTypedArgument _
                In CType(cad.ConstructorArguments, IEnumerable(Of CustomAttributeTypedArgument))

                ShowValueOrArray(cata)
            Next

            Console.WriteLine("      Named arguments:")
            For Each cana As CustomAttributeNamedArgument _
                In CType(cad.NamedArguments, IEnumerable(Of CustomAttributeNamedArgument))

                Console.WriteLine("         MemberInfo: '{0}'", _
                    cana.MemberInfo)
                ShowValueOrArray(cana.TypedValue)
            Next
        Next
    End Sub

    Private Shared Sub ShowValueOrArray(ByVal cata As CustomAttributeTypedArgument)
        If cata.Value.GetType() Is GetType(ReadOnlyCollection(Of CustomAttributeTypedArgument)) Then
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType)

            For Each cataElement As CustomAttributeTypedArgument In cata.Value
                Console.WriteLine("             Type: '{0}'  Value: '{1}'", _
                    cataElement.ArgumentType, cataElement.Value)
            Next
        Else
            Console.WriteLine("         Type: '{0}'  Value: '{1}'", _
                cata.ArgumentType, cata.Value)
        End If       
    End Sub
End Class

' This code example produces output similar to the following:
'
'Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
'   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
'      Constructor: 'Void .ctor(Int32)'
'      Constructor arguments:
'         Type: 'System.Int32'  Value: '8'
'      Named arguments:
'   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'Boolean WrapNonExceptionThrows'
'         Type: 'System.Boolean'  Value: 'True'
'   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
'      Constructor: 'Void .ctor(ExampleKind)'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '2'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the assembly.'
'
'Attributes for type: 'Test'
'   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
'      Constructor: 'Void .ctor(ExampleKind, System.String[])'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '1'
'         Array of 'System.String[]':
'             Type: 'System.String'  Value: 'String array argument, line 1'
'             Type: 'System.String'  Value: 'String array argument, line 2'
'             Type: 'System.String'  Value: 'String array argument, line 3'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the class.'
'         MemberInfo: 'Int32[] Numbers'
'         Array of 'System.Int32[]':
'             Type: 'System.Int32'  Value: '53'
'             Type: 'System.Int32'  Value: '57'
'             Type: 'System.Int32'  Value: '59'
'
'Attributes for member: 'Void TestMethod(System.Object)'
'   [ExampleAttribute(Note = "This is a note on a method.")]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on a method.'
'
'Attributes for parameter: 'System.Object arg'
'   [ExampleAttribute()]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:

Remarques

Cette surcharge de méthode obtient des données d’attribut personnalisées pour les types, les types imbriqués et les membres de type, car la Type classe et les classes de l’espace System.Reflection de noms qui représentent les membres de type dérivent toutes de MemberInfo.

Voir aussi

S’applique à

GetCustomAttributes(Module)

Source:
CustomAttributeData.cs
Source:
CustomAttributeData.cs
Source:
CustomAttributeData.cs

Renvoie une liste d’objets CustomAttributeData représentant des données sur les attributs qui ont été appliqués au module cible.

public:
 static System::Collections::Generic::IList<System::Reflection::CustomAttributeData ^> ^ GetCustomAttributes(System::Reflection::Module ^ target);
public static System.Collections.Generic.IList<System.Reflection.CustomAttributeData> GetCustomAttributes (System.Reflection.Module target);
static member GetCustomAttributes : System.Reflection.Module -> System.Collections.Generic.IList<System.Reflection.CustomAttributeData>
Public Shared Function GetCustomAttributes (target As Module) As IList(Of CustomAttributeData)

Paramètres

target
Module

Le module dont les données d’attribut personnalisé doivent être récupérées.

Retours

Une liste d’objets représentant des données sur les attributs qui ont été appliqués au module cible.

Exceptions

target a la valeur null.

S’applique à

GetCustomAttributes(ParameterInfo)

Source:
CustomAttributeData.cs
Source:
CustomAttributeData.cs
Source:
CustomAttributeData.cs

Retourne une liste d’objets CustomAttributeData représentant des données sur les attributs qui ont été appliqués au paramètre cible.

public:
 static System::Collections::Generic::IList<System::Reflection::CustomAttributeData ^> ^ GetCustomAttributes(System::Reflection::ParameterInfo ^ target);
public static System.Collections.Generic.IList<System.Reflection.CustomAttributeData> GetCustomAttributes (System.Reflection.ParameterInfo target);
static member GetCustomAttributes : System.Reflection.ParameterInfo -> System.Collections.Generic.IList<System.Reflection.CustomAttributeData>
Public Shared Function GetCustomAttributes (target As ParameterInfo) As IList(Of CustomAttributeData)

Paramètres

target
ParameterInfo

Le paramètre dont les données d’attribut doivent être récupérées.

Retours

Une liste d’objets représentant des données sur les attributs qui ont été appliqués au paramètre cible.

Exceptions

target a la valeur null.

Exemples

L’exemple suivant définit un attribut personnalisé avec quatre constructeurs et quatre propriétés. Deux des propriétés sont en lecture seule et sont définies à l’aide des paramètres positionnels des constructeurs. Les deux autres propriétés sont en lecture/écriture et peuvent être définies uniquement à l’aide d’arguments nommés. Une propriété positionnelle est un tableau de chaînes, et une propriété nommée est un tableau d’entiers.

L’attribut est appliqué à l’assembly, à un type déclaré dans l’assembly, à une méthode du type, et à un paramètre de la méthode. Différents constructeurs sont utilisés pour ces cas. Lorsqu’il est exécuté, l’assembly se charge lui-même dans le contexte de réflexion uniquement et affiche les attributs personnalisés.

L’attribut appliqué au type illustre les propriétés du tableau, avec des arguments positionnels et nommés.

La GetCustomAttributes méthode est utilisée dans Main() pour récupérer les attributs personnalisés appliqués à un paramètre d’une méthode de test. La valeur de retour de GetCustomAttributes est passée à la ShowAttributeData méthode .

using namespace System;
using namespace System::Reflection;
using namespace System::Collections::Generic;
using namespace System::Collections::ObjectModel;

// An enumeration used by the ExampleAttribute class.
public enum class ExampleKind
{
   FirstKind, SecondKind, ThirdKind, FourthKind
};

// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets::All)]
public ref class ExampleAttribute: public Attribute
{
private:
   // Data for properties.
   ExampleKind kindValue;
   String^ noteValue;
   array<String^>^ arrayStrings;
   array<int>^ arrayNumbers;

   // Constructors. 
   void ExampleAttributeInitialize( ExampleKind initKind, array<String^>^ initStrings )
   {
      kindValue = initKind;
      arrayStrings = initStrings;
   }
public:
   ExampleAttribute()
   {
      ExampleAttributeInitialize( ExampleKind::FirstKind, nullptr );
   }
   ExampleAttribute( ExampleKind initKind )
   {
      ExampleAttributeInitialize( initKind, nullptr );
   }
   ExampleAttribute( ExampleKind initKind, array<String^>^ initStrings )
   {
      ExampleAttributeInitialize( initKind, initStrings );
   }

   // Properties. The Note and Numbers properties must be read/write, so they
   // can be used as named parameters.
   //
   property ExampleKind Kind 
   {
      ExampleKind get()
      {
         return kindValue;
      }
   }
   property array<String^>^ Strings
   {
      array<String^>^ get()
      {
         return arrayStrings;
      }
   }
   property String^ Note 
   {
      String^ get()
      {
         return noteValue;
      }

      void set( String^ value )
      {
         noteValue = value;
      }
   }
   property array<int>^ Numbers
   {
      array<int>^ get()
      {
         return arrayNumbers;
      }

      void set( array<int>^ value )
      {
         arrayNumbers = value;
      }
   }
};

// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind::ThirdKind,Note="This is a note on the assembly.")];

// The example attribute is applied to the test class.
//
[Example(ExampleKind::SecondKind, 
         gcnew array<String^> { "String array argument, line 1", 
                        "String array argument, line 2", 
                        "String array argument, line 3" }, 
         Note="This is a note on the class.",
         Numbers = gcnew array<int> { 53, 57, 59 })] 
public ref class Test
{
public:
   // The example attribute is applied to a method, using the
   // parameterless constructor and supplying a named argument.
   // The attribute is also applied to the method parameter.
   //
   [Example(Note="This is a note on a method.")]
   void TestMethod( [Example] Object^ arg ){}

   // Main() gets objects representing the assembly, the test
   // type, the test method, and the method parameter. Custom
   // attribute data is displayed for each of these.
   //
   static void Main()
   {
      Assembly^ assembly = Assembly::ReflectionOnlyLoad( "Source" );
      Type^ t = assembly->GetType( "Test" );
      MethodInfo^ m = t->GetMethod( "TestMethod" );
      array<ParameterInfo^>^p = m->GetParameters();

      Console::WriteLine( "\r\nAttributes for assembly: '{0}'", assembly );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( assembly ) );
      Console::WriteLine( "\r\nAttributes for type: '{0}'", t );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( t ) );
      Console::WriteLine( "\r\nAttributes for member: '{0}'", m );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( m ) );
      Console::WriteLine( "\r\nAttributes for parameter: '{0}'", p );
      ShowAttributeData( CustomAttributeData::GetCustomAttributes( p[ 0 ] ) );
   }

private:
    static void ShowValueOrArray(CustomAttributeTypedArgument^ cata)
    {
        if (cata->Value->GetType() == ReadOnlyCollection<CustomAttributeTypedArgument>::typeid)
        {
            Console::WriteLine("         Array of '{0}':", cata->ArgumentType);

            for each (CustomAttributeTypedArgument^ cataElement in 
                (ReadOnlyCollection<CustomAttributeTypedArgument>^) cata->Value)
            {
                Console::WriteLine("             Type: '{0}'  Value: '{1}'",
                    cataElement->ArgumentType, cataElement->Value);
            }
        }
        else
        {
            Console::WriteLine( "         Type: '{0}'  Value: '{1}'",
               cata->ArgumentType, cata->Value );
        }
    }

   static void ShowAttributeData( IList< CustomAttributeData^ >^ attributes )
   {
      for each ( CustomAttributeData^ cad in attributes )
      {
         Console::WriteLine( "   {0}", cad );
         Console::WriteLine( "      Constructor: '{0}'", cad->Constructor );

         Console::WriteLine( "      Constructor arguments:" );
         for each ( CustomAttributeTypedArgument^ cata in cad->ConstructorArguments )
         {
            ShowValueOrArray(cata);
         }

         Console::WriteLine( "      Named arguments:" );
         for each ( CustomAttributeNamedArgument cana in cad->NamedArguments )
         {
            Console::WriteLine( "         MemberInfo: '{0}'", cana.MemberInfo );
            ShowValueOrArray(cana.TypedValue);
         }
      }
   }
};

int main()
{
   Test::Main();
}

/* This code example produces output similar to the following:

Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
      Constructor: 'Void .ctor(Int32)'
      Constructor arguments:
         Type: 'System.Int32'  Value: '8'
      Named arguments:
   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'Boolean WrapNonExceptionThrows'
         Type: 'System.Boolean'  Value: 'True'
   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
      Constructor: 'Void .ctor(ExampleKind)'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '2'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the assembly.'

Attributes for type: 'Test'
   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
      Constructor: 'Void .ctor(ExampleKind, System.String[])'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '1'
         Array of 'System.String[]':
             Type: 'System.String'  Value: 'String array argument, line 1'
             Type: 'System.String'  Value: 'String array argument, line 2'
             Type: 'System.String'  Value: 'String array argument, line 3'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the class.'
         MemberInfo: 'Int32[] Numbers'
         Array of 'System.Int32[]':
             Type: 'System.Int32'  Value: '53'
             Type: 'System.Int32'  Value: '57'
             Type: 'System.Int32'  Value: '59'

Attributes for member: 'Void TestMethod(System.Object)'
   [ExampleAttribute(Note = "This is a note on a method.")]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on a method.'

Attributes for parameter: 'System.Object arg'
   [ExampleAttribute()]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
*/
using System;
using System.Reflection;
using System.Collections.Generic;
using System.Collections.ObjectModel;

// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind.ThirdKind, Note="This is a note on the assembly.")]

// An enumeration used by the ExampleAttribute class.
public enum ExampleKind
{
    FirstKind,
    SecondKind,
    ThirdKind,
    FourthKind
};

// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets.All)]
public class ExampleAttribute : Attribute
{
    // Data for properties.
    private ExampleKind kindValue;
    private string noteValue;
    private string[] arrayStrings;
    private int[] arrayNumbers;

    // Constructors. The parameterless constructor (.ctor) calls
    // the constructor that specifies ExampleKind and an array of
    // strings, and supplies the default values.
    //
    public ExampleAttribute(ExampleKind initKind, string[] initStrings)
    {
        kindValue = initKind;
        arrayStrings = initStrings;
    }
    public ExampleAttribute(ExampleKind initKind) : this(initKind, null) {}
    public ExampleAttribute() : this(ExampleKind.FirstKind, null) {}

    // Properties. The Note and Numbers properties must be read/write, so they
    // can be used as named parameters.
    //
    public ExampleKind Kind { get { return kindValue; }}
    public string[] Strings { get { return arrayStrings; }}
    public string Note
    {
        get { return noteValue; }
        set { noteValue = value; }
    }
    public int[] Numbers
    {
        get { return arrayNumbers; }
        set { arrayNumbers = value; }
    }
}

// The example attribute is applied to the test class.
//
[Example(ExampleKind.SecondKind,
         new string[] { "String array argument, line 1",
                        "String array argument, line 2",
                        "String array argument, line 3" },
         Note="This is a note on the class.",
         Numbers = new int[] { 53, 57, 59 })]
public class Test
{
    // The example attribute is applied to a method, using the
    // parameterless constructor and supplying a named argument.
    // The attribute is also applied to the method parameter.
    //
    [Example(Note="This is a note on a method.")]
    public void TestMethod([Example] object arg) { }

    // Main() gets objects representing the assembly, the test
    // type, the test method, and the method parameter. Custom
    // attribute data is displayed for each of these.
    //
    public static void Main()
    {
        Assembly asm = Assembly.ReflectionOnlyLoad("Source");
        Type t = asm.GetType("Test");
        MethodInfo m = t.GetMethod("TestMethod");
        ParameterInfo[] p = m.GetParameters();

        Console.WriteLine("\r\nAttributes for assembly: '{0}'", asm);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm));
        Console.WriteLine("\r\nAttributes for type: '{0}'", t);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t));
        Console.WriteLine("\r\nAttributes for member: '{0}'", m);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m));
        Console.WriteLine("\r\nAttributes for parameter: '{0}'", p);
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p[0]));
    }

    private static void ShowAttributeData(
        IList<CustomAttributeData> attributes)
    {
        foreach( CustomAttributeData cad in attributes )
        {
            Console.WriteLine("   {0}", cad);
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor);

            Console.WriteLine("      Constructor arguments:");
            foreach( CustomAttributeTypedArgument cata
                in cad.ConstructorArguments )
            {
                ShowValueOrArray(cata);
            }

            Console.WriteLine("      Named arguments:");
            foreach( CustomAttributeNamedArgument cana
                in cad.NamedArguments )
            {
                Console.WriteLine("         MemberInfo: '{0}'",
                    cana.MemberInfo);
                ShowValueOrArray(cana.TypedValue);
            }
        }
    }

    private static void ShowValueOrArray(CustomAttributeTypedArgument cata)
    {
        if (cata.Value.GetType() == typeof(ReadOnlyCollection<CustomAttributeTypedArgument>))
        {
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType);

            foreach (CustomAttributeTypedArgument cataElement in
                (ReadOnlyCollection<CustomAttributeTypedArgument>) cata.Value)
            {
                Console.WriteLine("             Type: '{0}'  Value: '{1}'",
                    cataElement.ArgumentType, cataElement.Value);
            }
        }
        else
        {
            Console.WriteLine("         Type: '{0}'  Value: '{1}'",
                cata.ArgumentType, cata.Value);
        }
    }
}

/* This code example produces output similar to the following:

Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
      Constructor: 'Void .ctor(Int32)'
      Constructor arguments:
         Type: 'System.Int32'  Value: '8'
      Named arguments:
   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'Boolean WrapNonExceptionThrows'
         Type: 'System.Boolean'  Value: 'True'
   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
      Constructor: 'Void .ctor(ExampleKind)'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '2'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the assembly.'

Attributes for type: 'Test'
   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
      Constructor: 'Void .ctor(ExampleKind, System.String[])'
      Constructor arguments:
         Type: 'ExampleKind'  Value: '1'
         Array of 'System.String[]':
             Type: 'System.String'  Value: 'String array argument, line 1'
             Type: 'System.String'  Value: 'String array argument, line 2'
             Type: 'System.String'  Value: 'String array argument, line 3'
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on the class.'
         MemberInfo: 'Int32[] Numbers'
         Array of 'System.Int32[]':
             Type: 'System.Int32'  Value: '53'
             Type: 'System.Int32'  Value: '57'
             Type: 'System.Int32'  Value: '59'

Attributes for member: 'Void TestMethod(System.Object)'
   [ExampleAttribute(Note = "This is a note on a method.")]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
         MemberInfo: 'System.String Note'
         Type: 'System.String'  Value: 'This is a note on a method.'

Attributes for parameter: 'System.Object arg'
   [ExampleAttribute()]
      Constructor: 'Void .ctor()'
      Constructor arguments:
      Named arguments:
*/
Imports System.Reflection
Imports System.Collections.Generic
Imports System.Collections.ObjectModel

' The example attribute is applied to the assembly.
<Assembly:Example(ExampleKind.ThirdKind, Note:="This is a note on the assembly.")>

' An enumeration used by the ExampleAttribute class.
Public Enum ExampleKind
    FirstKind
    SecondKind
    ThirdKind
    FourthKind
End Enum

' An example attribute. The attribute can be applied to all
' targets, from assemblies to parameters.
'
<AttributeUsage(AttributeTargets.All)> _
Public Class ExampleAttribute
    Inherits Attribute

    ' Data for properties.
    Private kindValue As ExampleKind
    Private noteValue As String
    Private arrayStrings() As String
    Private arrayNumbers() As Integer

    ' Constructors. The parameterless constructor (.ctor) calls
    ' the constructor that specifies ExampleKind and an array of
    ' strings, and supplies the default values.
    '
    Public Sub New(ByVal initKind As ExampleKind, ByVal initStrings() As String)
        kindValue = initKind
        arrayStrings = initStrings
    End Sub
    Public Sub New(ByVal initKind As ExampleKind)
        Me.New(initKind, Nothing)
    End Sub
    Public Sub New()
        Me.New(ExampleKind.FirstKind, Nothing)
    End Sub

    ' Properties. The Note and Numbers properties must be read/write, so they 
    ' can be used as named parameters.
    '
    Public ReadOnly Property Kind As ExampleKind
        Get
            Return kindValue 
        End Get
    End Property
    Public ReadOnly Property Strings As String()
        Get
            Return arrayStrings 
        End Get
    End Property
    Public Property Note As String
        Get
            Return noteValue 
        End Get
        Set
            noteValue = value
        End Set
    End Property
    Public Property Numbers As Integer()
        Get
            Return arrayNumbers 
        End Get
        Set
            arrayNumbers = value
        End Set
    End Property
End Class

' The example attribute is applied to the test class.
'
<Example(ExampleKind.SecondKind, _
         New String() { "String array argument, line 1", _
                        "String array argument, line 2", _
                        "String array argument, line 3" }, _
         Note := "This is a note on the class.", _
         Numbers := New Integer() { 53, 57, 59 })> _
Public Class Test
    ' The example attribute is applied to a method, using the
    ' parameterless constructor and supplying a named argument.
    ' The attribute is also applied to the method parameter.
    '
    <Example(Note:="This is a note on a method.")> _
    Public Sub TestMethod(<Example()> ByVal arg As Object)
    End Sub

    ' Sub Main gets objects representing the assembly, the test
    ' type, the test method, and the method parameter. Custom
    ' attribute data is displayed for each of these.
    '
    Public Shared Sub Main()
        Dim asm As [Assembly] = Assembly.ReflectionOnlyLoad("source")
        Dim t As Type = asm.GetType("Test")
        Dim m As MethodInfo = t.GetMethod("TestMethod")
        Dim p() As ParameterInfo = m.GetParameters()

        Console.WriteLine(vbCrLf & "Attributes for assembly: '{0}'", asm)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm))
        Console.WriteLine(vbCrLf & "Attributes for type: '{0}'", t)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(t))
        Console.WriteLine(vbCrLf & "Attributes for member: '{0}'", m)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(m))
        Console.WriteLine(vbCrLf & "Attributes for parameter: '{0}'", p)
        ShowAttributeData(CustomAttributeData.GetCustomAttributes(p(0)))
    End Sub

    Private Shared Sub ShowAttributeData( _
        ByVal attributes As IList(Of CustomAttributeData))

        For Each cad As CustomAttributeData _
            In CType(attributes, IEnumerable(Of CustomAttributeData))

            Console.WriteLine("   {0}", cad)
            Console.WriteLine("      Constructor: '{0}'", cad.Constructor)

            Console.WriteLine("      Constructor arguments:")
            For Each cata As CustomAttributeTypedArgument _
                In CType(cad.ConstructorArguments, IEnumerable(Of CustomAttributeTypedArgument))

                ShowValueOrArray(cata)
            Next

            Console.WriteLine("      Named arguments:")
            For Each cana As CustomAttributeNamedArgument _
                In CType(cad.NamedArguments, IEnumerable(Of CustomAttributeNamedArgument))

                Console.WriteLine("         MemberInfo: '{0}'", _
                    cana.MemberInfo)
                ShowValueOrArray(cana.TypedValue)
            Next
        Next
    End Sub

    Private Shared Sub ShowValueOrArray(ByVal cata As CustomAttributeTypedArgument)
        If cata.Value.GetType() Is GetType(ReadOnlyCollection(Of CustomAttributeTypedArgument)) Then
            Console.WriteLine("         Array of '{0}':", cata.ArgumentType)

            For Each cataElement As CustomAttributeTypedArgument In cata.Value
                Console.WriteLine("             Type: '{0}'  Value: '{1}'", _
                    cataElement.ArgumentType, cataElement.Value)
            Next
        Else
            Console.WriteLine("         Type: '{0}'  Value: '{1}'", _
                cata.ArgumentType, cata.Value)
        End If       
    End Sub
End Class

' This code example produces output similar to the following:
'
'Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
'   [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
'      Constructor: 'Void .ctor(Int32)'
'      Constructor arguments:
'         Type: 'System.Int32'  Value: '8'
'      Named arguments:
'   [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'Boolean WrapNonExceptionThrows'
'         Type: 'System.Boolean'  Value: 'True'
'   [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
'      Constructor: 'Void .ctor(ExampleKind)'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '2'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the assembly.'
'
'Attributes for type: 'Test'
'   [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
'      Constructor: 'Void .ctor(ExampleKind, System.String[])'
'      Constructor arguments:
'         Type: 'ExampleKind'  Value: '1'
'         Array of 'System.String[]':
'             Type: 'System.String'  Value: 'String array argument, line 1'
'             Type: 'System.String'  Value: 'String array argument, line 2'
'             Type: 'System.String'  Value: 'String array argument, line 3'
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on the class.'
'         MemberInfo: 'Int32[] Numbers'
'         Array of 'System.Int32[]':
'             Type: 'System.Int32'  Value: '53'
'             Type: 'System.Int32'  Value: '57'
'             Type: 'System.Int32'  Value: '59'
'
'Attributes for member: 'Void TestMethod(System.Object)'
'   [ExampleAttribute(Note = "This is a note on a method.")]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:
'         MemberInfo: 'System.String Note'
'         Type: 'System.String'  Value: 'This is a note on a method.'
'
'Attributes for parameter: 'System.Object arg'
'   [ExampleAttribute()]
'      Constructor: 'Void .ctor()'
'      Constructor arguments:
'      Named arguments:

Remarques

Cette méthode fournit une alternative à la GetCustomAttributes méthode qui peut toujours être utilisée dans le contexte De réflexion uniquement.

Voir aussi

S’applique à