Compartir a través de


TcpListener.AcceptTcpClient Método

Definición

Acepta una solicitud de conexión pendiente.

public:
 System::Net::Sockets::TcpClient ^ AcceptTcpClient();
public System.Net.Sockets.TcpClient AcceptTcpClient ();
member this.AcceptTcpClient : unit -> System.Net.Sockets.TcpClient
Public Function AcceptTcpClient () As TcpClient

Devoluciones

TcpClient que se utiliza para enviar y recibir datos.

Excepciones

El agente de escucha no se ha iniciado con una llamada a Start().

Utilice la propiedad ErrorCode para obtener el código de error específico. Cuando obtenga este código, puede ver la documentación de códigos de error de la API de Windows Sockets, versión 2, para ver una descripción detallada del error.

Ejemplos

En el ejemplo de código siguiente, el AcceptTcpClient método se usa para devolver un TcpClient. Se TcpClient usa para comunicarse con el cliente recién conectado.

/**
* This program shows how to use the TcpListener class. 
* It creates a TcpListener that listens on the specified port (13000). 
* To run this program at the command line you enter:
* cs_tcpserver
* Any TcpClient that wants to use this server
* has to explicitly connect to an address obtained by the combination of
* the server on which this TcpServer is running and the port 13000. 
* This TcpServer simply echoes back the message sent by the TcpClient, after
* translating it into uppercase. 
**/

#using <System.dll>

using namespace System;
using namespace System::IO;
using namespace System::Net;
using namespace System::Net::Sockets;
using namespace System::Text;

int main()
{
   try
   {
      
      // Set the TcpListener on port 13000.
      Int32 port = 13000;
      TcpListener^ server = gcnew TcpListener(IPAddress::Any, port);
      
      // Start listening for client requests.
      server->Start();
      
      // Buffer for reading data
      array<Byte>^bytes = gcnew array<Byte>(256);
      String^ data = nullptr;
      
      // Enter the listening loop.
      while ( true )
      {
         Console::Write( "Waiting for a connection... " );
         
         // Perform a blocking call to accept requests.
         // You could also use server.AcceptSocket() here.
         TcpClient^ client = server->AcceptTcpClient();
         Console::WriteLine( "Connected!" );
         data = nullptr;
         
         // Get a stream object for reading and writing
         NetworkStream^ stream = client->GetStream();
         Int32 i;
         
         // Loop to receive all the data sent by the client.
         while ( (i = stream->Read( bytes, 0, bytes->Length )) != 0 )
         {
            
            // Translate data bytes to a ASCII string.
            data = System::Text::Encoding::ASCII->GetString( bytes, 0, i );
            Console::WriteLine( String::Format( "Received: {0}", data ) );
            
            // Process the data sent by the client.
            data = data->ToUpper();
            array<Byte>^msg = System::Text::Encoding::ASCII->GetBytes( data );
            
            // Send back a response.
            stream->Write( msg, 0, msg->Length );
            Console::WriteLine( String::Format( "Sent: {0}", data ) );
         }
         
         // Shutdown and end connection
         client->Close();
      }
   }
   catch ( SocketException^ e ) 
   {
      Console::WriteLine( "SocketException: {0}", e );
   }

   Console::WriteLine( "\nHit enter to continue..." );
   Console::Read();
}
/**
* The following sample is intended to demonstrate how to use a
* TcpListener for synchronous communcation with a TCP client
* It creates a TcpListener that listens on the specified port (13000).
* Any TCP client that wants to use this TcpListener has to explicitly connect
* to an address obtained by the combination of the server
* on which this TcpListener is running and the port 13000.
* This TcpListener simply echoes back the message sent by the client
* after translating it into uppercase.
* Refer to the related client in the TcpClient class.
*/
using System;
using System.Text;
using System.IO;
using System.Net;
using System.Net.Sockets;
using System.Threading;

public class TcpListenerSample
{

    static void Main(string[] args)
    {
        try
        {
            // set the TcpListener on port 13000
            int port = 13000;
            TcpListener server = new TcpListener(IPAddress.Any, port);

            // Start listening for client requests
            server.Start();

            // Buffer for reading data
            byte[] bytes = new byte[1024];
            string data;

            //Enter the listening loop
            while (true)
            {
                Console.Write("Waiting for a connection... ");

                // Perform a blocking call to accept requests.
                // You could also use server.AcceptSocket() here.
                TcpClient client = server.AcceptTcpClient();
                Console.WriteLine("Connected!");

                // Get a stream object for reading and writing
                NetworkStream stream = client.GetStream();

                int i;

                // Loop to receive all the data sent by the client.
                i = stream.Read(bytes, 0, bytes.Length);

                while (i != 0)
                {
                    // Translate data bytes to a ASCII string.
                    data = System.Text.Encoding.ASCII.GetString(bytes, 0, i);
                    Console.WriteLine(String.Format("Received: {0}", data));

                    // Process the data sent by the client.
                    data = data.ToUpper();

                    byte[] msg = System.Text.Encoding.ASCII.GetBytes(data);

                    // Send back a response.
                    stream.Write(msg, 0, msg.Length);
                    Console.WriteLine(String.Format("Sent: {0}", data));

                    i = stream.Read(bytes, 0, bytes.Length);
                }

                // Shutdown and end connection
                client.Close();
            }
        }
        catch (SocketException e)
        {
            Console.WriteLine("SocketException: {0}", e);
        }

        Console.WriteLine("Hit enter to continue...");
        Console.Read();
    }
}
' The following sample is intended to demonstrate how to use a
' TcpListener for synchronous communcation with a TCP client
' It creates a TcpListener that connects to the specified port (13000).
' Any TCP client that wants to use this TcpListener has to explicitly connect 
' to an address obtained by the combination of the server
' on which this TcpListener is running and the port 13000.
' This TcpListener simply echoes back the message sent by the client
' after translating it into uppercase. 
' Refer to the related client in the TcpClient class. 
'/


Imports System.IO
Imports System.Net
Imports System.Net.Sockets
Imports System.Text

 _

Class MyTcpListener
   
   Public Shared Sub Main()
      
      Try
         ' Set the TcpListener on port 13000.
         Dim port As Int32 = 13000
         Dim server As New TcpListener(IPAddress.Any, port)
         
         ' Start listening for client requests.
         server.Start()
         
         ' Buffer for reading data
         Dim bytes(1024) As [Byte]
         Dim data As [String] = Nothing
         
         ' Enter the listening loop.
         While True
            Console.Write("Waiting for a connection... ")
            
            ' Perform a blocking call to accept requests.
            ' You could also use server.AcceptSocket() here.
            Dim client As TcpClient = server.AcceptTcpClient()
            Console.WriteLine("Connected!")
            
            data = Nothing
            
            ' Get a stream object for reading and writing
            Dim stream As NetworkStream = client.GetStream()
            
            Dim i As Int32
            
            ' Loop to receive all the data sent by the client.
            i = stream.Read(bytes, 0, bytes.Length)
            While (i <> 0) 
               ' Translate data bytes to a ASCII string.
               data = System.Text.Encoding.ASCII.GetString(bytes, 0, i)
               Console.WriteLine([String].Format("Received: {0}", data))
               
               ' Process the data sent by the client.
               data = data.ToUpper()
               
               Dim msg As [Byte]() = System.Text.Encoding.ASCII.GetBytes(data)
               
               ' Send back a response.
               stream.Write(msg, 0, msg.Length)
               Console.WriteLine([String].Format("Sent: {0}", data))
              
               i = stream.Read(bytes, 0, bytes.Length)

            End While
            
            ' Shutdown and end connection
            client.Close()
         End While
      Catch e As SocketException
         Console.WriteLine("SocketException: {0}", e)
      End Try
      
      Console.WriteLine(ControlChars.Cr + "Hit enter to continue...")
      Console.Read()
   End Sub
End Class

Comentarios

AcceptTcpClient es un método de bloqueo que devuelve un TcpClient objeto que se puede usar para enviar y recibir datos. Use el Pending método para determinar si las solicitudes de conexión están disponibles en la cola de conexiones entrantes si desea evitar el bloqueo.

Use el TcpClient.GetStream método para obtener el subyacente NetworkStream del objeto devuelto TcpClient. NetworkStream Le proporcionará métodos para enviar y recibir con el host remoto. Cuando esté a través de con TcpClient, asegúrese de llamar a su Close método . Si desea una mayor flexibilidad que una TcpClient oferta, considere la posibilidad de usar AcceptSocket.

Nota

Este miembro genera información de seguimiento cuando se habilita el seguimiento de red en la aplicación. Para obtener más información, vea Seguimiento de red en .NET Framework.

Se aplica a

Consulte también