Share via


AnchoringBehavior.CenterVertically Method

Definition

Overloads

CenterVertically(NodeShape, AnchoringBehavior+Edge, ShapeField, AnchoringBehavior+Edge)
CenterVertically(ShapeField, AnchoringBehavior+Edge, ShapeField, AnchoringBehavior+Edge, Double)
CenterVertically(NodeShape, AnchoringBehavior+Edge, ShapeField, AnchoringBehavior+Edge, Double)
CenterVertically(NodeShape, AnchoringBehavior+Edge, NodeShape, AnchoringBehavior+Edge, Double)
CenterVertically(ShapeField, AnchoringBehavior+Edge, ShapeField, AnchoringBehavior+Edge)
CenterVertically(ShapeField, AnchoringBehavior+Edge, NodeShape, AnchoringBehavior+Edge)
CenterVertically(ShapeField, AnchoringBehavior+Edge, AnchoringBehavior+Edge, Double)
CenterVertically(NodeShape, AnchoringBehavior+Edge, NodeShape, AnchoringBehavior+Edge)
CenterVertically(ShapeField, AnchoringBehavior+Edge, NodeShape, AnchoringBehavior+Edge, Double)
CenterVertically(AnchoringBehavior+Edge, ShapeField, AnchoringBehavior+Edge, Double)
CenterVertically(AnchoringBehavior+Edge, NodeShape, AnchoringBehavior+Edge, Double)
CenterVertically(ShapeField, AnchoringBehavior+Edge, AnchoringBehavior+Edge)
CenterVertically(NodeShape, AnchoringBehavior+Edge, AnchoringBehavior+Edge)
CenterVertically(AnchoringBehavior+Edge, ShapeField, AnchoringBehavior+Edge)
CenterVertically(AnchoringBehavior+Edge, NodeShape, AnchoringBehavior+Edge)
CenterVertically(Double)
CenterVertically(NodeShape, AnchoringBehavior+Edge, AnchoringBehavior+Edge, Double)
CenterVertically()

CenterVertically(NodeShape, AnchoringBehavior+Edge, ShapeField, AnchoringBehavior+Edge)

public:
 void CenterVertically(Microsoft::VisualStudio::Modeling::Diagrams::NodeShape ^ topSibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge topSiblingSide, Microsoft::VisualStudio::Modeling::Diagrams::ShapeField ^ bottomSibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge bottomSiblingSide);
public void CenterVertically (Microsoft.VisualStudio.Modeling.Diagrams.NodeShape topSibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge topSiblingSide, Microsoft.VisualStudio.Modeling.Diagrams.ShapeField bottomSibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge bottomSiblingSide);
member this.CenterVertically : Microsoft.VisualStudio.Modeling.Diagrams.NodeShape * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * Microsoft.VisualStudio.Modeling.Diagrams.ShapeField * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge -> unit
Public Sub CenterVertically (topSibling As NodeShape, topSiblingSide As AnchoringBehavior.Edge, bottomSibling As ShapeField, bottomSiblingSide As AnchoringBehavior.Edge)

Parameters

topSibling
NodeShape
topSiblingSide
AnchoringBehavior.Edge
bottomSibling
ShapeField
bottomSiblingSide
AnchoringBehavior.Edge

Applies to

CenterVertically(ShapeField, AnchoringBehavior+Edge, ShapeField, AnchoringBehavior+Edge, Double)

public:
 void CenterVertically(Microsoft::VisualStudio::Modeling::Diagrams::ShapeField ^ topSibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge topSiblingSide, Microsoft::VisualStudio::Modeling::Diagrams::ShapeField ^ bottomSibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge bottomSiblingSide, double percentage);
public void CenterVertically (Microsoft.VisualStudio.Modeling.Diagrams.ShapeField topSibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge topSiblingSide, Microsoft.VisualStudio.Modeling.Diagrams.ShapeField bottomSibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge bottomSiblingSide, double percentage);
member this.CenterVertically : Microsoft.VisualStudio.Modeling.Diagrams.ShapeField * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * Microsoft.VisualStudio.Modeling.Diagrams.ShapeField * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * double -> unit
Public Sub CenterVertically (topSibling As ShapeField, topSiblingSide As AnchoringBehavior.Edge, bottomSibling As ShapeField, bottomSiblingSide As AnchoringBehavior.Edge, percentage As Double)

Parameters

topSibling
ShapeField
topSiblingSide
AnchoringBehavior.Edge
bottomSibling
ShapeField
bottomSiblingSide
AnchoringBehavior.Edge
percentage
Double

Applies to

CenterVertically(NodeShape, AnchoringBehavior+Edge, ShapeField, AnchoringBehavior+Edge, Double)

public:
 void CenterVertically(Microsoft::VisualStudio::Modeling::Diagrams::NodeShape ^ topSibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge topSiblingSide, Microsoft::VisualStudio::Modeling::Diagrams::ShapeField ^ bottomSibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge bottomSiblingSide, double percentage);
public void CenterVertically (Microsoft.VisualStudio.Modeling.Diagrams.NodeShape topSibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge topSiblingSide, Microsoft.VisualStudio.Modeling.Diagrams.ShapeField bottomSibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge bottomSiblingSide, double percentage);
member this.CenterVertically : Microsoft.VisualStudio.Modeling.Diagrams.NodeShape * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * Microsoft.VisualStudio.Modeling.Diagrams.ShapeField * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * double -> unit
Public Sub CenterVertically (topSibling As NodeShape, topSiblingSide As AnchoringBehavior.Edge, bottomSibling As ShapeField, bottomSiblingSide As AnchoringBehavior.Edge, percentage As Double)

Parameters

topSibling
NodeShape
topSiblingSide
AnchoringBehavior.Edge
bottomSibling
ShapeField
bottomSiblingSide
AnchoringBehavior.Edge
percentage
Double

Applies to

CenterVertically(NodeShape, AnchoringBehavior+Edge, NodeShape, AnchoringBehavior+Edge, Double)

public:
 void CenterVertically(Microsoft::VisualStudio::Modeling::Diagrams::NodeShape ^ topSibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge topSiblingSide, Microsoft::VisualStudio::Modeling::Diagrams::NodeShape ^ bottomSibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge bottomSiblingSide, double percentage);
public void CenterVertically (Microsoft.VisualStudio.Modeling.Diagrams.NodeShape topSibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge topSiblingSide, Microsoft.VisualStudio.Modeling.Diagrams.NodeShape bottomSibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge bottomSiblingSide, double percentage);
member this.CenterVertically : Microsoft.VisualStudio.Modeling.Diagrams.NodeShape * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * Microsoft.VisualStudio.Modeling.Diagrams.NodeShape * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * double -> unit
Public Sub CenterVertically (topSibling As NodeShape, topSiblingSide As AnchoringBehavior.Edge, bottomSibling As NodeShape, bottomSiblingSide As AnchoringBehavior.Edge, percentage As Double)

Parameters

topSibling
NodeShape
topSiblingSide
AnchoringBehavior.Edge
bottomSibling
NodeShape
bottomSiblingSide
AnchoringBehavior.Edge
percentage
Double

Applies to

CenterVertically(ShapeField, AnchoringBehavior+Edge, ShapeField, AnchoringBehavior+Edge)

public:
 void CenterVertically(Microsoft::VisualStudio::Modeling::Diagrams::ShapeField ^ topSibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge topSiblingSide, Microsoft::VisualStudio::Modeling::Diagrams::ShapeField ^ bottomSibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge bottomSiblingSide);
public void CenterVertically (Microsoft.VisualStudio.Modeling.Diagrams.ShapeField topSibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge topSiblingSide, Microsoft.VisualStudio.Modeling.Diagrams.ShapeField bottomSibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge bottomSiblingSide);
member this.CenterVertically : Microsoft.VisualStudio.Modeling.Diagrams.ShapeField * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * Microsoft.VisualStudio.Modeling.Diagrams.ShapeField * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge -> unit
Public Sub CenterVertically (topSibling As ShapeField, topSiblingSide As AnchoringBehavior.Edge, bottomSibling As ShapeField, bottomSiblingSide As AnchoringBehavior.Edge)

Parameters

topSibling
ShapeField
topSiblingSide
AnchoringBehavior.Edge
bottomSibling
ShapeField
bottomSiblingSide
AnchoringBehavior.Edge

Applies to

CenterVertically(ShapeField, AnchoringBehavior+Edge, NodeShape, AnchoringBehavior+Edge)

public:
 void CenterVertically(Microsoft::VisualStudio::Modeling::Diagrams::ShapeField ^ topSibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge topSiblingSide, Microsoft::VisualStudio::Modeling::Diagrams::NodeShape ^ bottomSibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge bottomSiblingSide);
public void CenterVertically (Microsoft.VisualStudio.Modeling.Diagrams.ShapeField topSibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge topSiblingSide, Microsoft.VisualStudio.Modeling.Diagrams.NodeShape bottomSibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge bottomSiblingSide);
member this.CenterVertically : Microsoft.VisualStudio.Modeling.Diagrams.ShapeField * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * Microsoft.VisualStudio.Modeling.Diagrams.NodeShape * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge -> unit
Public Sub CenterVertically (topSibling As ShapeField, topSiblingSide As AnchoringBehavior.Edge, bottomSibling As NodeShape, bottomSiblingSide As AnchoringBehavior.Edge)

Parameters

topSibling
ShapeField
topSiblingSide
AnchoringBehavior.Edge
bottomSibling
NodeShape
bottomSiblingSide
AnchoringBehavior.Edge

Applies to

CenterVertically(ShapeField, AnchoringBehavior+Edge, AnchoringBehavior+Edge, Double)

public:
 void CenterVertically(Microsoft::VisualStudio::Modeling::Diagrams::ShapeField ^ topSibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge topSiblingSide, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge bottomSide, double percentage);
public void CenterVertically (Microsoft.VisualStudio.Modeling.Diagrams.ShapeField topSibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge topSiblingSide, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge bottomSide, double percentage);
member this.CenterVertically : Microsoft.VisualStudio.Modeling.Diagrams.ShapeField * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * double -> unit
Public Sub CenterVertically (topSibling As ShapeField, topSiblingSide As AnchoringBehavior.Edge, bottomSide As AnchoringBehavior.Edge, percentage As Double)

Parameters

topSibling
ShapeField
topSiblingSide
AnchoringBehavior.Edge
percentage
Double

Applies to

CenterVertically(NodeShape, AnchoringBehavior+Edge, NodeShape, AnchoringBehavior+Edge)

public:
 void CenterVertically(Microsoft::VisualStudio::Modeling::Diagrams::NodeShape ^ topSibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge topSiblingSide, Microsoft::VisualStudio::Modeling::Diagrams::NodeShape ^ bottomSibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge bottomSiblingSide);
public void CenterVertically (Microsoft.VisualStudio.Modeling.Diagrams.NodeShape topSibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge topSiblingSide, Microsoft.VisualStudio.Modeling.Diagrams.NodeShape bottomSibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge bottomSiblingSide);
member this.CenterVertically : Microsoft.VisualStudio.Modeling.Diagrams.NodeShape * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * Microsoft.VisualStudio.Modeling.Diagrams.NodeShape * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge -> unit
Public Sub CenterVertically (topSibling As NodeShape, topSiblingSide As AnchoringBehavior.Edge, bottomSibling As NodeShape, bottomSiblingSide As AnchoringBehavior.Edge)

Parameters

topSibling
NodeShape
topSiblingSide
AnchoringBehavior.Edge
bottomSibling
NodeShape
bottomSiblingSide
AnchoringBehavior.Edge

Applies to

CenterVertically(ShapeField, AnchoringBehavior+Edge, NodeShape, AnchoringBehavior+Edge, Double)

public:
 void CenterVertically(Microsoft::VisualStudio::Modeling::Diagrams::ShapeField ^ topSibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge topSiblingSide, Microsoft::VisualStudio::Modeling::Diagrams::NodeShape ^ bottomSibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge bottomSiblingSide, double percentage);
public void CenterVertically (Microsoft.VisualStudio.Modeling.Diagrams.ShapeField topSibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge topSiblingSide, Microsoft.VisualStudio.Modeling.Diagrams.NodeShape bottomSibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge bottomSiblingSide, double percentage);
member this.CenterVertically : Microsoft.VisualStudio.Modeling.Diagrams.ShapeField * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * Microsoft.VisualStudio.Modeling.Diagrams.NodeShape * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * double -> unit
Public Sub CenterVertically (topSibling As ShapeField, topSiblingSide As AnchoringBehavior.Edge, bottomSibling As NodeShape, bottomSiblingSide As AnchoringBehavior.Edge, percentage As Double)

Parameters

topSibling
ShapeField
topSiblingSide
AnchoringBehavior.Edge
bottomSibling
NodeShape
bottomSiblingSide
AnchoringBehavior.Edge
percentage
Double

Applies to

CenterVertically(AnchoringBehavior+Edge, ShapeField, AnchoringBehavior+Edge, Double)

public:
 void CenterVertically(Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge topSide, Microsoft::VisualStudio::Modeling::Diagrams::ShapeField ^ sibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge bottomSide, double percentage);
public void CenterVertically (Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge topSide, Microsoft.VisualStudio.Modeling.Diagrams.ShapeField sibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge bottomSide, double percentage);
member this.CenterVertically : Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * Microsoft.VisualStudio.Modeling.Diagrams.ShapeField * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * double -> unit
Public Sub CenterVertically (topSide As AnchoringBehavior.Edge, sibling As ShapeField, bottomSide As AnchoringBehavior.Edge, percentage As Double)

Parameters

sibling
ShapeField
percentage
Double

Applies to

CenterVertically(AnchoringBehavior+Edge, NodeShape, AnchoringBehavior+Edge, Double)

public:
 void CenterVertically(Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge topSide, Microsoft::VisualStudio::Modeling::Diagrams::NodeShape ^ sibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge bottomSide, double percentage);
public void CenterVertically (Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge topSide, Microsoft.VisualStudio.Modeling.Diagrams.NodeShape sibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge bottomSide, double percentage);
member this.CenterVertically : Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * Microsoft.VisualStudio.Modeling.Diagrams.NodeShape * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * double -> unit
Public Sub CenterVertically (topSide As AnchoringBehavior.Edge, sibling As NodeShape, bottomSide As AnchoringBehavior.Edge, percentage As Double)

Parameters

sibling
NodeShape
percentage
Double

Applies to

CenterVertically(ShapeField, AnchoringBehavior+Edge, AnchoringBehavior+Edge)

public:
 void CenterVertically(Microsoft::VisualStudio::Modeling::Diagrams::ShapeField ^ topSibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge topSiblingSide, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge bottomSide);
public void CenterVertically (Microsoft.VisualStudio.Modeling.Diagrams.ShapeField topSibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge topSiblingSide, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge bottomSide);
member this.CenterVertically : Microsoft.VisualStudio.Modeling.Diagrams.ShapeField * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge -> unit
Public Sub CenterVertically (topSibling As ShapeField, topSiblingSide As AnchoringBehavior.Edge, bottomSide As AnchoringBehavior.Edge)

Parameters

topSibling
ShapeField
topSiblingSide
AnchoringBehavior.Edge

Applies to

CenterVertically(NodeShape, AnchoringBehavior+Edge, AnchoringBehavior+Edge)

public:
 void CenterVertically(Microsoft::VisualStudio::Modeling::Diagrams::NodeShape ^ topSibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge topSiblingSide, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge bottomSide);
public void CenterVertically (Microsoft.VisualStudio.Modeling.Diagrams.NodeShape topSibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge topSiblingSide, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge bottomSide);
member this.CenterVertically : Microsoft.VisualStudio.Modeling.Diagrams.NodeShape * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge -> unit
Public Sub CenterVertically (topSibling As NodeShape, topSiblingSide As AnchoringBehavior.Edge, bottomSide As AnchoringBehavior.Edge)

Parameters

topSibling
NodeShape
topSiblingSide
AnchoringBehavior.Edge

Applies to

CenterVertically(AnchoringBehavior+Edge, ShapeField, AnchoringBehavior+Edge)

public:
 void CenterVertically(Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge topSide, Microsoft::VisualStudio::Modeling::Diagrams::ShapeField ^ sibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge bottomSide);
public void CenterVertically (Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge topSide, Microsoft.VisualStudio.Modeling.Diagrams.ShapeField sibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge bottomSide);
member this.CenterVertically : Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * Microsoft.VisualStudio.Modeling.Diagrams.ShapeField * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge -> unit
Public Sub CenterVertically (topSide As AnchoringBehavior.Edge, sibling As ShapeField, bottomSide As AnchoringBehavior.Edge)

Parameters

sibling
ShapeField

Applies to

CenterVertically(AnchoringBehavior+Edge, NodeShape, AnchoringBehavior+Edge)

public:
 void CenterVertically(Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge topSide, Microsoft::VisualStudio::Modeling::Diagrams::NodeShape ^ sibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge bottomSide);
public void CenterVertically (Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge topSide, Microsoft.VisualStudio.Modeling.Diagrams.NodeShape sibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge bottomSide);
member this.CenterVertically : Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * Microsoft.VisualStudio.Modeling.Diagrams.NodeShape * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge -> unit
Public Sub CenterVertically (topSide As AnchoringBehavior.Edge, sibling As NodeShape, bottomSide As AnchoringBehavior.Edge)

Parameters

sibling
NodeShape

Applies to

CenterVertically(Double)

public:
 void CenterVertically(double percentage);
public void CenterVertically (double percentage);
member this.CenterVertically : double -> unit
Public Sub CenterVertically (percentage As Double)

Parameters

percentage
Double

Applies to

CenterVertically(NodeShape, AnchoringBehavior+Edge, AnchoringBehavior+Edge, Double)

public:
 void CenterVertically(Microsoft::VisualStudio::Modeling::Diagrams::NodeShape ^ topSibling, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge topSiblingSide, Microsoft::VisualStudio::Modeling::Diagrams::AnchoringBehavior::Edge bottomSide, double percentage);
public void CenterVertically (Microsoft.VisualStudio.Modeling.Diagrams.NodeShape topSibling, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge topSiblingSide, Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge bottomSide, double percentage);
member this.CenterVertically : Microsoft.VisualStudio.Modeling.Diagrams.NodeShape * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * Microsoft.VisualStudio.Modeling.Diagrams.AnchoringBehavior.Edge * double -> unit
Public Sub CenterVertically (topSibling As NodeShape, topSiblingSide As AnchoringBehavior.Edge, bottomSide As AnchoringBehavior.Edge, percentage As Double)

Parameters

topSibling
NodeShape
topSiblingSide
AnchoringBehavior.Edge
percentage
Double

Applies to

CenterVertically()

public:
 void CenterVertically();
public void CenterVertically ();
member this.CenterVertically : unit -> unit
Public Sub CenterVertically ()

Applies to