PosPrinter Members

2/27/2008

Defines the programmatic interface for a UPOS Printer device.

The following tables list the members exposed by the PosPrinter type.

Protected Constructors

Top

Public Fields

	Name	Description
	CharacterSetAnsi	Indicates the default character set supports the ANSI character set.
	CharacterSetAscii	Indicates the default character set supports the ASCII character set.
	CharacterSetUnicode	Indicates the default character set supports the Unicode character set.
	ExtendedErrorBadFormat	Indicates an unsupported format.
	ExtendedErrorCoverOpen	Indicates that the printer cover is open.
	ExtendedErrorFirmwareBadFile	Indicates the specified firmware file or files exist, but one or more of those files are either not in the correct format or are corrupted. (inherited from PosCommon)
	ExtendedErrorJournalCartridgeEmpty	Indicates the journal cartridge is empty.
	ExtendedErrorJournalCartridgeRemoved	Indicates the journal cartridge has been removed.
	ExtendedErrorJournalEmpty	Indicates the journal station is out of paper.
	ExtendedErrorJournalHeadCleaning	Indicates the journal cartridge head is being cleaned.
	ExtendedErrorReceiptCartridgeEmpty	Indicates the receipt cartridge is empty.
	ExtendedErrorReceiptCartridgeRemoved	Indicates the receipt cartridge has been removed.
	ExtendedErrorReceiptEmpty	Indicates the receipt station is out of paper.
	ExtendedErrorReceiptHeadCleaning	Indicates the receipt cartridge head is being cleaned.
	ExtendedErrorSlipCartridgeEmpty	Indicates the slip cartridge is empty.
	ExtendedErrorSlipCartridgeRemoved	Indicates the slip cartridge has been removed.
	ExtendedErrorSlipEmpty	Indicates a form has not been inserted into the slip station.
	ExtendedErrorSlipForm	Indicates a form is present while the printer is being taken out of from removal mode.
	ExtendedErrorSlipHeadCleaning	Indicates the slip cartridge head is being cleaned.
	ExtendedErrorStatistics	Indicates a specified statistic could not be reset or updated. (inherited from PosCommon)
	ExtendedErrorStatisticsDependency	(inherited from PosCommon )
	ExtendedErrorTooBig	Indicates the bitmap is either too wide to print without transformation, or too big to tranform.
	PrinterBarCodeCenter	Indicates the bar code should be printed aligned with the center of the station.
	PrinterBarCodeLeft	Indicates the bar code should be printed aligned with the leftmost print column.
	PrinterBarCodeRight	Indicates the bar code should be printed aligned with the rightmost print column.
	PrinterBitmapAsIs	Indicates the bitmap should be printed with one bitmap pixel per printer dot.
	PrinterBitmapCenter	Indicates the bitmap should be printed aligned with the center of the station.
	PrinterBitmapLeft	Indicates the bitmap should be printed aligned with the leftmost print column.
	PrinterBitmapRight	Indicates the bitmap should be printed aligned with the rightmost print column.
	PrinterCutPaperFullCut	Indicates a full paper cut.
	StatisticBarcodePrintedCount	Incremented when a bar code is successfully printed.
	StatisticCommunicationErrorCount	Holds the programmatic name of the Communication Error Count common statistic. (inherited from PosCommon)
	StatisticDeviceCategory	Holds the programmatic name of the Device Category common statistic. (inherited from PosCommon)
	StatisticFailedPaperCutCount	Incremented for each failed paper cut.
	StatisticFailedPrintSideChangeCount	Incremented for each failed print side change or failed check flip.
	StatisticFirmwareRevision	Holds the programmatic name of the Firmware Revision common statistic. (inherited from PosCommon)
	StatisticFormInsertionCount	Incremented when a form is successfully inserted into the document/slip station.
	StatisticHomeErrorCount	Incremented when a home error occurs.
	StatisticHoursPoweredCount	Holds the programmatic name of the Hours Powered On common statistic. (inherited from PosCommon)
	StatisticInstallationDate	Holds the programmatic name of the Installation Date common statistic. (inherited from PosCommon)
	StatisticInterface	Holds the programmatic name of the Interface common statistic. (inherited from PosCommon)
	StatisticJournalCharacterPrintedCount	Incremented for every journal character printed.
	StatisticJournalCoverOpenCount	Incremented every time that the document/slip station cover opened.
	StatisticJournalLinePrintedCount	Incremented for each journal line printed.
	StatisticManufactureDate	Holds the programmatic name of the Manufacture Date common statistic. (inherited from PosCommon)
	StatisticManufacturerName	Holds the programmatic name of the Manufacturer Name common statistic. (inherited from PosCommon)
	StatisticMaximumTempReachedCount	Incremented every time that maximum temperature is reached.
	StatisticMechanicalRevision	Holds the programmatic name of the Mechanical Revision common statistic. (inherited from PosCommon)
	StatisticModelName	Holds the programmatic name of the Model Name common statistic. (inherited from PosCommon)
	StatisticNVRAMWriteCount	Incremented every time that NVRAM is written to.
	StatisticPaperCutCount	Incremented every time that paper is cut successfully.
	StatisticPrinterFaultCount	Incremented when a printer fault occurs.
	StatisticPrintSideChangeCount	Incremented when the print side changes or a check flips.
	StatisticReceiptCharacterPrintedCount	Incremented every time that a receipt character is printed.
	StatisticReceiptCoverOpenCount	Incremented every time that the receipt cover opened.
	StatisticReceiptLineFeedCount	Incremented every time that a receipt line feed is performed.
	StatisticReceiptLinePrintedCount	Incremented every time that a receipt line is printed.
	StatisticSerialNumber	Holds the programmatic name of the Serial Number common statistic. (inherited from PosCommon)
	StatisticSlipCharacterPrintedCount	Incremented every time that a slip character is printed.
	StatisticSlipCoverOpenCount	Incremented every time that the slip cover opened.
	StatisticSlipLineFeedCount	Incremented every time that a slip line feed is performed.
	StatisticSlipLinePrintedCount	Incremented every time that a slip line is printed.
	StatisticStampFiredCount	Incremented for each Stamp raised.
	StatisticUnifiedPOSVersion	Holds the programmatic name of the Unified POS Version common statistic. (inherited from PosCommon)
	StatusCoverOK	Indicates the printer cover is closed.
	StatusCoverOpen	Indicates the printer cover is open.
	StatusIdle	Indicates all asynchronous output is finished, either successfully or because the output has been cleared. The printer State property is now set to ControlState.Idle.
	StatusJournalCartridgeEmpty	Indicates the journal cartridge has to be replaced.
	StatusJournalCartridgeNearEmpty	Indicates the journal cartridge is near its end.
	StatusJournalCartridgeOK	Indicates all journal cartridges are ready.
	StatusJournalCoverOK	Indicates the journal cover is closed.
	StatusJournalCoverOpen	Indicates the journal cover is open.
	StatusJournalEmpty	Indicates there is no journal paper.
	StatusJournalHeadCleaning	Indicates the journal cartridge has begun head cleaning.
	StatusJournalNearEmpty	Indicates the journal paper is low.
	StatusJournalPaperOK	Indicates the journal paper is ready.
	StatusPowerOff	Indicates that the device’s power is turned off or it is detached from the terminal. (inherited from PosCommon)
	StatusPowerOffline	Indicates that the device is powered on but is either not ready or unable to respond to requests. (inherited from PosCommon)
	StatusPowerOffOffline	Indicates that either the device’s power is off or it is offline. (inherited from PosCommon)
	StatusPowerOnline	Indicates that the device’s power is turned on and it is ready for use. (inherited from PosCommon)
	StatusReceiptCartridgeEmpty	Indicates the receipt cartridge has to be replaced.
	StatusReceiptCartridgeNearEmpty	Indicates the receipt cartridge is nearing empty.
	StatusReceiptCartridgeOK	Indicates all receipt cartridges are ready.
	StatusReceiptCoverOK	Indicates the receipt cover is closed.
	StatusReceiptCoverOpen	Indicates the receipt cover is open.
	StatusReceiptEmpty	Indicates there is no receipt paper.
	StatusReceiptHeadCleaning	Indicates the receipt cartridge has begun head cleaning.
	StatusReceiptNearEmpty	Indicates the receipt paper is low.
	StatusReceiptPaperOK	Indicates the receipt paper is ready.
	StatusSlipCartridgeEmpty	Indicates the slip cartridge has to be replaced.
	StatusSlipCartridgeNearEmpty	Indicates the slip cartridge is nearing empty.
	StatusSlipCartridgeOK	Indicates all slip cartridges are ready.
	StatusSlipCoverOK	Indicates the slip cover is closed.
	StatusSlipCoverOpen	Indicates the slip cover is open.
	StatusSlipEmpty	Indicates that no slip form is inserted and no slip form has been detected at the entrance to the slip station.
	StatusSlipHeadCleaning	Indicates the receipt cartridge has begun head cleaning.
	StatusSlipNearEmpty	Indicates the slip form is close to the bottom.
	StatusSlipPaperOK	Indicates the slip form is inserted.
	StatusUpdateFirmwareComplete	Indicates the update firmware process has completed successfully. (inherited from PosCommon)
	StatusUpdateFirmwareCompleteDeviceNotRestored	Indicates the update firmware process succeeded. However, the Service Object and/or the physical device cannot be returned to the state they were in before the update firmware process started.  (inherited from PosCommon)
	StatusUpdateFirmwareFailedDeviceNeedsFirmware	Indicates the update firmware process failed. The device will not be operational until another attempt to update the firmware is successful. (inherited from PosCommon)
	StatusUpdateFirmwareFailedDeviceOk	Indicates the update firmware process failed. However, the device is still operational. (inherited from PosCommon)
	StatusUpdateFirmwareFailedDeviceUnknown	Indicates the update firmware process failed. The device is in an indeterminate state. (inherited from PosCommon)
	StatusUpdateFirmwareFailedDeviceUnrecoverable	Indicates the update firmware process failed. The device is either unusable or unrecoverable through software. (inherited from PosCommon)
	StatusUpdateFirmwareProgress	Indicates the update firmware process has completed 1 to 100 percent successfully. (inherited from PosCommon)
	WaitForever	Used as the value for a timeout parameter in common and device-specific methods to indicate the method should wait until it receives a response, instead of timing out. (inherited from PosCommon)

Top

Public Properties

(see also Protected Properties )

	Name	Description
	AsyncMode	Gets or sets a Boolean value that indicates whether certain print methods will be performed asynchronously.
	CapCharacterSet	Gets the default character set capability.
	CapCompareFirmwareVersion	Gets a Boolean value that indicates whether the Service Object/device supports comparing the firmware version in the physical device against that of a firmware file. (inherited from PosCommon)
	CapConcurrentJrnRec	Gets a Boolean value that indicates whether the journal and receipt stations can print at the same time.
	CapConcurrentJrnSlp	Gets a Boolean value that indicates whether the journal and slip stations can print at the same time.
	CapConcurrentPageMode	Gets a Boolean value that indicates whether the printer can support Page Mode at the same time for both the receipt and slip stations.
	CapConcurrentRecSlp	Gets a Boolean value that indicates whether the receipt and slip stations can print at the same time.
	CapCoverSensor	Gets a Boolean value that indicates whether the printer has a "cover open" sensor.
	CapJrn2Color	Gets a Boolean value that indicates whether the journal can print dark plus an alternate color.
	CapJrnBold	Gets a Boolean value that indicates whether the journal can print bold characters.
	CapJrnCartridgeSensor	Gets the presence of journal cartridge monitoring sensors.
	CapJrnColor	Gets available journal color cartridges.
	CapJrnDHigh	Gets a Boolean value that indicates whether the journal can print double-high characters.
	CapJrnDWide	Gets a Boolean value that indicates whether the journal can print double-wide characters.
	CapJrnDWideDHigh	Gets a Boolean value that indicates whether the journal can print characters that are both double-high and double-wide.
	CapJrnEmptySensor	Gets a Boolean value that indicates whether the journal has an out-of-paper sensor.
	CapJrnItalic	Gets a Boolean value that indicates whether the journal can print italic characters.
	CapJrnNearEndSensor	Gets a Boolean value that indicates whether the journal has a low-paper sensor.
	CapJrnPresent	Gets a Boolean value that indicates whether the journal print station is present.
	CapJrnUnderline	Gets a Boolean value that indicates whether the journal can underline characters.
	CapMapCharacterSet	Gets a Boolean value that indicates whether when printing data, the service object can map the characters sent by the application (in the character set that is defined by the CharacterSet property) to the character sets that are defined by the CharacterSetList property.
	CapPowerReporting	Gets the power reporting capabilities of the device. (inherited from PosCommon)
	CapRec2Color	Gets a Boolean value that indicates whether the receipt can print dark plus an alternate color.
	CapRecBarCode	Gets a Boolean value that indicates whether the receipt has bar code printing capability.
	CapRecBitmap	Gets a Boolean value that indicates whether the receipt can print bitmaps.
	CapRecBold	Gets a Boolean value that indicates whether the receipt can print bold characters.
	CapRecCartridgeSensor	Gets the presence of receipt cartridge monitoring sensors.
	CapRecColor	Gets the receipt color cartridges.
	CapRecDHigh	Gets a Boolean value that indicates whether the receipt can print double-high characters.
	CapRecDWide	Gets a Boolean value that indicates whether the receipt can print double-wide characters.
	CapRecDWideDHigh	Gets a Boolean value that indicates whether the receipt can print double-high, double-wide characters.
	CapRecEmptySensor	Gets a Boolean value that indicates whether the receipt has an out-of-paper sensor.
	CapRecItalic	Gets a Boolean value that indicates whether the receipt can print italic characters.
	CapRecLeft90	Gets a Boolean value that indicates whether the receipt can print in rotated-90-degree-left mode.
	CapRecMarkFeed	Gets the type of mark-sensed paper handling available.
	CapRecNearEndSensor	Gets a Boolean value that indicates whether the receipt has a low-paper sensor.
	CapRecPageMode	Gets a Boolean value that indicates whether the printer can support Page Mode for the receipt station.
	CapRecPaperCut	Gets a Boolean value that indicates whether the receipt can perform paper cuts.
	CapRecPresent	Gets a Boolean value that indicates whether the receipt print station is present.
	CapRecRight90	Gets a Boolean value that indicates whether the receipt can print in a rotated-90-degree-right mode.
	CapRecRotate180	Gets a Boolean value that indicates whether the receipt can print in a rotated upside-down mode.
	CapRecStamp	Gets a Boolean value that indicates whether the receipt has a stamp capability.
	CapRecUnderline	Gets a Boolean value that indicates whether the receipt can underline characters.
	CapSlp2Color	Gets a Boolean value that indicates whether the slip can print dark plus an alternate color.
	CapSlpBarCode	Gets a Boolean value that indicates whether the slip has bar code printing capability.
	CapSlpBitmap	Gets a Boolean value that indicates whether the slip can print bitmaps.
	CapSlpBold	Gets a Boolean value that indicates whether the slip can print bold characters.
	CapSlpBothSidesPrint	Gets a Boolean value that indicates whether the slip print station supports printing on both sides of the document.
	CapSlpCartridgeSensor	Gets the presence of slip-cartridge monitoring sensors.
	CapSlpColor	Gets the type of color cartridges supported for slip printing.
	CapSlpDHigh	Gets a Boolean value that indicates whether the slip can print double-high characters.
	CapSlpDWide	Gets a Boolean value that indicates whether the slip can print double-wide characters.
	CapSlpDWideDHigh	Gets a Boolean value that indicates whether the slip can print characters that are both double-wide and double-high.
	CapSlpEmptySensor	Gets a Boolean value that indicates whether the slip has a "slip in" sensor.
	CapSlpFullSlip	Gets a Boolean value that indicates whether the slip is a full slip station; it can print full-length forms.
	CapSlpItalic	Gets a Boolean value that indicates whether the slip can print italic characters.
	CapSlpLeft90	Gets a Boolean value that indicates whether the slip can print in a rotated 90 degree left mode.
	CapSlpNearEndSensor	Gets a Boolean value that indicates whether the slip has a "slip near end" sensor.
	CapSlpPageMode	Gets a Boolean value that indicates whether the printer can support Page Mode for the slip station.
	CapSlpPresent	Gets a Boolean value that indicates whether the slip print station is present.
	CapSlpRight90	Gets a Boolean value that indicates whether the slip can print in a rotated-90-degree-right mode.
	CapSlpRotate180	Gets a Boolean value that indicates whether the slip can print in an upside-down mode.
	CapSlpUnderline	Gets a Boolean value that indicates whether the slip can underline characters.
	CapStatisticsReporting	Gets a Boolean value that indicates whether the device can accumulate and can provide various statistics regarding usage. (inherited from PosCommon)
	CapTransaction	Gets a Boolean value that indicates whether each station supports printer transactions.
	CapUpdateFirmware	Gets a Boolean value that indicates whether the device's firmware can be updated through the UpdateFirmware method. (inherited from PosCommon)
	CapUpdateStatistics	Gets a Boolean value that indicates whether some or all the device statistics can be reset to 0 (zero) by using the ResetStatistic and ResetStatistics methods, or updated by using the UpdateStatistic and UpdateStatistics methods. (inherited from PosCommon)
	CartridgeNotify	Gets or sets the type of cartridge state notification the application wants to receive.
	CharacterSet	Gets or sets the numeric value that indicates the character set that the application wants to use for printing characters.
	CharacterSetList	Gets the list of character set numbers supported for printing.
	CheckHealthText	Gets a string that indicates the health of the device. (inherited from PosCommon)
	Claimed	Gets a Boolean value that indicates whether the device is claimed for exclusive access. (inherited from PosCommon)
	Compatibility	Gets the compatibility level of a device. (inherited from PosDevice)
	CoverOpen	Gets a Boolean value that indicates whether the printer’s cover is open.
	DeviceDescription	Gets a string identifying the device and the company that manufactured it. (inherited from PosCommon)
	DeviceEnabled	Gets or sets a Boolean value that indicates whether the device has been placed in an operational state. (inherited from PosCommon)
	DeviceName	Gets a short string identifying the device and any pertinent information about it. (inherited from PosCommon)
	ErrorLevel	Gets the severity of the most recent error condition.
	ErrorStation	Gets the station or stations that were printing when an error was detected.
	ErrorString	Gets a vendor-supplied description of the current error.
	FlagWhenIdle	Gets or sets a Boolean value that indicates whether the service object queues a StatusUpdateEvent event by using the StatusIdle constant when the device is in an idle state, and reset FlagWhenIdle to false.
	FontTypefaceList	Gets a string array that specifies the fonts and typefaces supported by the printer.
	FreezeEvents	Gets or sets a Boolean value that indicates whether the application has requested that the Service Object not deliver events. (inherited from PosCommon)
	JrnCartridgeState	Gets the status of the selected journal cartridge (ink, ribbon, or toner).
	JrnCurrentCartridge	Gets or sets the currently selected journal cartridge.
	JrnEmpty	Gets or sets a Boolean value that indicates whether the journal is out of paper.
	JrnLetterQuality	Gets or sets a Boolean value that indicates whether the printer can print in high-quality mode.
	JrnLineChars	Gets or sets the number of characters that the application wants to print on a journal line.
	JrnLineCharsList	Gets a collection of the line widths (characters per line) supported by the journal station.
	JrnLineHeight	Gets or sets the journal print line height that the application wants to use, expressed in the unit of measure indicated by the MapMode property setting.
	JrnLineSpacing	Gets or sets the spacing of each single-high print line, including both the printed line height and the white space between each pair of lines that the application wants to use.
	JrnLineWidth	Gets the width of a line for the number of characters indicated by the JrnLineChars property, expressed in the unit of measure indicated by the MapMode property.
	JrnNearEnd	Gets a Boolean value that indicates whether the journal paper is low.
	MapCharacterSet	Gets a Boolean value that indicates whether the service object maps the characters transferred by the application to the character set selected in the CharacterSet property.
	MapMode	Gets or sets the mapping mode of the printer the application wants to use.
	OutputId	Gets the identifier associated with the current output request.
	PageModeArea	Gets the page area for the selected PageModeStation expressed in the unit of measure given by MapMode.
	PageModeDescriptor	Gets the basic Page mode functionality of the printer for the selected PageModeStation property.
	PageModeHorizontalPosition	Gets or sets the horizontal start position offset within the print area for the print station specified by the PageModeStation property, expressed in the unit of measure specified by the MapMode property.
	PageModePrintArea	Gets or sets the print area for the print station specified by the PageModeStation property, expressed in the unit of measured specified by the MapMode property.
	PageModePrintDirection	Gets the print direction, as specified by the PageModePrintDirection enumeration.
	PageModeStation	Gets or sets the printer station, as specified by the PrinterStation enumeration.
	PageModeVerticalPosition	Gets or sets the vertical start position offset within the print area for the print station specified by the PageModeStation property, expressed in the unit of measure specified by the MapMode property.
	PowerNotify	Gets or sets the type of power notification selection made by the application. (inherited from PosCommon)
	PowerState	Gets the current power condition. (inherited from PosCommon)
	RecBarCodeRotationList	Gets a list of the directions in which a receipt bar code can be rotated.
	RecBitmapRotationList	Gets a list of the directions in which a receipt bitmap can be rotated.
	RecCartridgeState	Gets the status of the selected receipt cartridge (ink, ribbon or toner).
	RecCurrentCartridge	Gets or sets the receipt cartridge selected by the application.
	RecEmpty	Gets a Boolean value that indicates whether the receipt is out of paper.
	RecLetterQuality	Gets a Boolean value that indicates whether the printer prints in high-quality mode.
	RecLineChars	Gets or sets the number of characters that the application wants to print on a receipt line.
	RecLineCharsList	Gets a collection of the line widths (characters per line) supported by the receipt station.
	RecLineHeight	Gets or sets the receipt print line height, expressed in the unit of measure indicated by the MapMode property setting, that the application wants to use.
	RecLineSpacing	Gets or sets the spacing of each single-high print line. This includes both the printed line height and the white space between each pair of lines, that the application wants to use.
	RecLinesToPaperCut	Gets the number of lines that must be advanced before cutting the receipt paper.
	RecLineWidth	Gets the width of a line, based on the number of characters specified in the RecLineChars property, expressed in the unit of measure indicated by the MapMode property.
	RecNearEnd	Gets a Boolean value that indicates whether the receipt paper is low.
	RecSidewaysMaxChars	Gets the maximum number of characters that can be printed on each line in sideways mode.
	RecSidewaysMaxLines	Gets the maximum number of lines that can be printed in sideways mode.
	RotateSpecial	Gets or sets the rotation orientation for bar codes that the application wants to use.
	ServiceObjectDescription	Gets a string identifying the Service Object that supports the device and the company that produced it. (inherited from PosCommon)
	ServiceObjectVersion	Gets the Service Object version number. (inherited from PosCommon)
	SlpBarCodeRotationList	Gets a collection of the directions in which a slip bar code may be rotated.
	SlpBitmapRotationList	Gets a collection of the directions in which a slip bitmap can be rotated.
	SlpCartridgeState	Gets the status of the selected slip cartridge (ink, ribbon, or toner).
	SlpCurrentCartridge	Gets or sets the slip cartridge the application wants to use.
	SlpEmpty	Gets a Boolean value that indicates whether a slip form is not present.
	SlpLetterQuality	Gets or sets a Boolean value that indicates whether the printer prints in high-quality mode.
	SlpLineChars	Gets or sets the number of characters that the application wants to print on a slip line.
	SlpLineCharsList	Gets a collection of the line widths (characters per line) supported by the slip station.
	SlpLineHeight	Gets or sets the slip print-line height, expressed in the unit of measure indicated by the MapMode property setting, that the application wants to use.
	SlpLinesNearEndToEnd	Gets the number of lines that can be printed after the SlpNearEnd property has been set to true but before the printer reaches the end of the slip.
	SlpLineSpacing	Gets or sets the spacing of each single-high print line. This includes both the printed line height and the white space between each pair of lines that the application wants to use.
	SlpLineWidth	Gets the line width, based on the number of characters specified for the SlpLineChars property, expressed in the unit of measure indicated by the MapMode property.
	SlpMaxLines	Gets the maximum number of lines that can be printed on a form.
	SlpNearEnd	Gets a Boolean value that indicates whether the slip form is near its end.
	SlpPrintSide	Gets the side of the slip print station document on which printing will occur.
	SlpSidewaysMaxChars	Gets the maximum number of characters that can be printed on each line in sideways mode.
	SlpSidewaysMaxLines	Gets the maximum number of lines that can be printed in sideways mode.
	State	Gets the current state of the device. (inherited from PosCommon)
	SynchronizingObject	Gets or sets the object that is used to marshal the event handler calls issued because of a POS event. (inherited from PosCommon)

Top

Protected Properties

	Name	Description
	DeviceInstanceId	(inherited from PosCommon )
	DevicePath	Gets or sets the hardware path of a device. (inherited from PosCommon)
	HardwareId	(inherited from PosCommon )
	IsExclusiveUseDevice	Overridden. Gets a Boolean value that indicates whether the PosPrinter is an exclusive-use device.

Top

Public Methods

(see also Protected Methods )

	Name	Description
	BeginInsertion	Starts form insertion processing. BeginInsertion is paired with the EndInsertion method to control form insertion.
	BeginRemoval	Starts form removal processing.
	ChangePrintSide	Selects the side of the document that it wants to print on.
	CheckHealth	(inherited from PosCommon )
	Claim	(inherited from PosCommon )
	ClearOutput	Clears all device output that has been buffered. Also, when it is possible, stops outputs that are in progress.
	ClearPrintArea	Clears the area defined by the PageModePrintArea property.
	Close	Releases the device and its resources. (inherited from PosCommon)
	CompareFirmwareVersion	(inherited from PosCommon )
	CutPaper	Cuts the receipt paper.
	DirectIO	(inherited from PosCommon )
	EndInsertion	Ends form-insertion processing.
	EndRemoval	Ends form-removal processing.
	Equals	Overloaded. (inherited from Object )
	GetHashCode	(inherited from Object )
	GetType	(inherited from Object )
	MarkFeed	Uses the printer’s mark sensor for receipt paper.
	Open	Opens a device for later input/output processing. (inherited from PosCommon)
	PageModePrint	Starts or exits Page Mode for the station specified in the PageModeStation property.
	PrintBarCode	Prints a bar code on the specified printer station.
	PrintBitmap	Prints a bitmap on the specified printer station.
	PrintImmediate	Prints the string immediately that is specified for data on the printer station specified by station.
	PrintMemoryBitmap	Prints a bitmap from memory on the specified printer station.
	PrintNormal	Prints the string specified in data on the printer station specified in station.
	PrintTwoNormal	Prints two strings on two print stations concurrently. When supported, this may give increased print performance.
	ReferenceEquals	(inherited from Object )
	Release	Releases exclusive access to the device. (inherited from PosCommon)
	ResetStatistic	(inherited from PosCommon )
	ResetStatistics	Overloaded. (inherited from PosCommon )
	RetrieveStatistic	(inherited from PosCommon )
	RetrieveStatistics	Overloaded. (inherited from PosCommon )
	RotatePrint	Enters or exits rotated print mode.
	SetBitmap	Saves information about a bitmap for later printing.
	SetLogo	Saves a data string as the top or bottom logo.
	ToString	(inherited from Object )
	TransactionPrint	Enters or exits transaction mode.
	UpdateFirmware	(inherited from PosCommon )
	UpdateStatistic	(inherited from PosCommon )
	UpdateStatistics	Overloaded. (inherited from PosCommon )
	ValidateData	Determines whether a data sequence, possibly including one or more escape sequences, is valid for the specified station, before it calls the PrintImmediate, PrintNormal, or PrintTwoNormal methods.

Top

Protected Methods

	Name	Description
	DeleteConfigurationProperty	(inherited from PosCommon )
	Finalize	(inherited from Object )
	GetConfigurationProperty	(inherited from PosCommon )
	Invoke	(inherited from PosCommon )
	MemberwiseClone	(inherited from Object )
	SetConfigurationProperty	(inherited from PosCommon )

Top

Public Events

(see also Protected Events )

	Name	Description
	DirectIOEvent	Raised by the Service Object to communicate information directly to the application. (inherited from PosCommon)
	ErrorEvent	Queued by the service object when an error is detected and the device’s State transitions into the error state.
	OutputCompleteEvent	Queued by the service object to notify the application when asynchronous processing that corresponds to an OutputID has successfully completed.
	StatusUpdateEvent	Raised by the Service Object to alert the application of a device status change. (inherited from PosCommon)

Top

Protected Events

	Name	Description
	DeviceAddedEvent	(inherited from PosCommon )
	DeviceRemovedEvent	(inherited from PosCommon )

Top

See Also

Reference

PosPrinter Class
Microsoft.PointOfService Namespace