Udostępnij za pośrednictwem


PropertyAttributes Wyliczenie

Definicja

Definiuje atrybuty, które mogą być skojarzone z właściwością. Te wartości atrybutów są definiowane w pliku corhdr.h.

To wyliczenie obsługuje bitową kombinację jego wartości składowych.

public enum class PropertyAttributes
[System.Flags]
public enum PropertyAttributes
[System.Flags]
[System.Serializable]
public enum PropertyAttributes
[System.Flags]
[System.Serializable]
[System.Runtime.InteropServices.ComVisible(true)]
public enum PropertyAttributes
[<System.Flags>]
type PropertyAttributes = 
[<System.Flags>]
[<System.Serializable>]
type PropertyAttributes = 
[<System.Flags>]
[<System.Serializable>]
[<System.Runtime.InteropServices.ComVisible(true)>]
type PropertyAttributes = 
Public Enum PropertyAttributes
Dziedziczenie
PropertyAttributes
Atrybuty

Pola

HasDefault 4096

Określa, że właściwość ma wartość domyślną.

None 0

Określa, że żadne atrybuty nie są skojarzone z właściwością.

Reserved2 8192

Zarezerwowany.

Reserved3 16384

Zarezerwowany.

Reserved4 32768

Zarezerwowany.

ReservedMask 62464

Określa flagę zarezerwowaną tylko do użytku w czasie wykonywania.

RTSpecialName 1024

Określa, że wewnętrzne interfejsy API metadanych sprawdzają kodowanie nazw.

SpecialName 512

Określa, że właściwość jest specjalna, z nazwą opisującą sposób, w jaki właściwość jest specjalna.

Przykłady

Poniższy przykład tworzy trzy właściwości i wyświetla PropertyAttributes wyliczone wartości. Należy pamiętać, że właściwość tylko do odczytu nie ma ustawiania i dlatego nie można jej zmienićCaption = statement.

using namespace System;
using namespace System::Reflection;

// Define three properties: one read-write, one default,
// and one read only. 
// Define a read-write property.
public ref class Aproperty
{
private:
   String^ caption;

public:
   Aproperty()
      : caption( "A Default caption" )
   {}


   property String^ Caption 
   {
      String^ get()
      {
         return caption;
      }

      void set( String^ value )
      {
         if ( caption != value )
         {
            caption = value;
         }
      }

   }

};


// Define a default property.
public ref class Bproperty
{
private:
   String^ caption;

public:
   Bproperty()
      : caption( "B Default caption" )
   {}

public:
   property String^ Item
   {
      String^ get()
      {
         return "1";
      }

   }

   property String^ Caption 
   {
      String^ get()
      {
         return caption;
      }

      void set( String^ value )
      {
         if ( caption != value )
         {
            caption = value;
         }
      }

   }

};


// Define a read-only property.
public ref class Cproperty
{
private:
   String^ caption;

public:
   Cproperty()
      : caption( "C Default caption" )
   {}


   property String^ Caption 
   {
      String^ get()
      {
         return caption;
      }

   }

};

int main()
{
   Console::WriteLine( "\nReflection.PropertyAttributes" );
   
   // Determine whether a property exists, and change its value.
   Aproperty^ Mypropertya = gcnew Aproperty;
   Bproperty^ Mypropertyb = gcnew Bproperty;
   Cproperty^ Mypropertyc = gcnew Cproperty;
   Console::Write( "\n1. Mypropertya->Caption = {0}", Mypropertya->Caption );
   Console::Write( "\n1. Mypropertyb->Caption = {0}", Mypropertyb->Caption );
   Console::Write( "\n1. Mypropertyc->Caption = {0}", Mypropertyc->Caption );
   
   // Only Mypropertya can be changed, as Mypropertyb is read-only.
   Mypropertya->Caption = "A- This is changed.";
   Mypropertyb->Caption = "B- This is changed.";
   
   // Note that Mypropertyc is not changed because it is read only
   Console::Write( "\n\n2. Mypropertya->Caption = {0}", Mypropertya->Caption );
   Console::Write( "\n2. Mypropertyb->Caption = {0}", Mypropertyb->Caption );
   Console::Write( "\n2. Mypropertyc->Caption = {0}", Mypropertyc->Caption );
   
   // Get the PropertyAttributes enumeration of the property.
   // Get the type.
   Type^ MyTypea = Type::GetType( "Aproperty" );
   Type^ MyTypeb = Type::GetType( "Bproperty" );
   Type^ MyTypec = Type::GetType( "Cproperty" );

   // Get the property attributes.
   PropertyInfo^ Mypropertyinfoa = MyTypea->GetProperty( "Caption" );
   PropertyAttributes Myattributesa = Mypropertyinfoa->Attributes;
   PropertyInfo^ Mypropertyinfob = MyTypeb->GetProperty( "Item" );
   PropertyAttributes Myattributesb = Mypropertyinfob->Attributes;
   PropertyInfo^ Mypropertyinfoc = MyTypec->GetProperty( "Caption" );
   PropertyAttributes Myattributesc = Mypropertyinfoc->Attributes;

   // Display the property attributes value.
   Console::Write( "\n\na- {0}", Myattributesa );
   Console::Write( "\nb- {0}", Myattributesb );
   Console::Write( "\nc- {0}", Myattributesc );
   return 0;
}

// This example displays the following output to the console
//
// Reflection.PropertyAttributes
//
// 1. Mypropertya.Caption = A Default caption
// 1. Mypropertyb.Caption = B Default caption
// 1. Mypropertyc.Caption = C Default caption
//
// 2. Mypropertya.Caption = A- This is changed.
// 2. Mypropertyb.Caption = B- This is changed.
// 2. Mypropertyc.Caption = C Default caption
//
// a- None
// b- None
// c- None
using System;
using System.Reflection;

 // Define three properties: one read-write, one default,
 // and one read only.
public class Aproperty
    // Define a read-write property.
{
    private string caption = "A Default caption";
    public string Caption
    {
        get{return caption;}
        set
        {
            if (caption != value){caption = value;}
        }
    }
}
public class Bproperty
    // Define a default property.
{
    private string caption  = "B Default caption";
    public string this [int index]
    {
        get {return "1";}
    }
    public string Caption
    {

        get{return caption;}
        set
        {
            if (caption != value){caption = value;}
        }
    }
}
public class Cproperty
    // Define a read-only property.
{
    private string caption = "C Default caption";
    public string Caption
    {
        get{return caption;}
        // No setting is allowed, because this is a read-only property.
    }
}

class propertyattributesenum
{
    public static int Main(string[] args)
    {
        Console.WriteLine("\nReflection.PropertyAttributes");

        // Determine whether a property exists, and change its value.
        Aproperty Mypropertya = new Aproperty();
        Bproperty Mypropertyb = new Bproperty();
        Cproperty Mypropertyc = new Cproperty();

        Console.Write("\n1. Mypropertya.Caption = " + Mypropertya.Caption );

        Console.Write("\n1. Mypropertyb.Caption = " + Mypropertyb.Caption );

        Console.Write("\n1. Mypropertyc.Caption = " + Mypropertyc.Caption );

        // Only Mypropertya can be changed, as Mypropertyb is read-only.
        Mypropertya.Caption = "A- This is changed.";
        Mypropertyb.Caption = "B- This is changed.";
        // Note that Mypropertyc is not changed because it is read only

        Console.Write("\n\n2. Mypropertya.Caption = " + Mypropertya.Caption );

        Console.Write("\n2. Mypropertyb.Caption = " + Mypropertyb.Caption );

        Console.Write("\n2. Mypropertyc.Caption = " + Mypropertyc.Caption );

        // Get the PropertyAttributes enumeration of the property.
        // Get the type.
        Type MyTypea = Type.GetType("Aproperty");
        Type MyTypeb = Type.GetType("Bproperty");
        Type MyTypec = Type.GetType("Cproperty");

        // Get the property attributes.
        PropertyInfo Mypropertyinfoa = MyTypea.GetProperty("Caption");
        PropertyAttributes Myattributesa = Mypropertyinfoa.Attributes;
        PropertyInfo Mypropertyinfob = MyTypeb.GetProperty("Item");
        PropertyAttributes Myattributesb = Mypropertyinfob.Attributes;
        PropertyInfo Mypropertyinfoc = MyTypec.GetProperty("Caption");
        PropertyAttributes Myattributesc = Mypropertyinfoc.Attributes;

        // Display the property attributes value.

        Console.Write("\n\na- " + Myattributesa.ToString());

        Console.Write("\nb- " + Myattributesb.ToString());

        Console.Write("\nc- " + Myattributesc.ToString());
        return 0;
    }
}

// This example displays the following output to the console
//
// Reflection.PropertyAttributes
//
// 1. Mypropertya.Caption = A Default caption
// 1. Mypropertyb.Caption = B Default caption
// 1. Mypropertyc.Caption = C Default caption
//
// 2. Mypropertya.Caption = A- This is changed.
// 2. Mypropertyb.Caption = B- This is changed.
// 2. Mypropertyc.Caption = C Default caption
//
// a- None
// b- None
// c- None
Imports System.Reflection

' Make three properties, one read-write, one default,
' and one read-only. 
Public Class Aproperty
    ' Define a read-write property.
    Private myCaption As String = "A Default caption"

    Public Property Caption() As String
        Get
            Return myCaption
        End Get
        Set(ByVal Value As String)
            If myCaption <> value Then
                myCaption = value
            End If
        End Set
    End Property
End Class

Public Class Bproperty
    ' Define a default property.
    Private myCaption As String = "B Default caption"

    Default Public ReadOnly Property Item(ByVal index As Integer) As String
        Get
            Return "1"
        End Get
    End Property

    Public Property Caption() As String

        Get
            Return myCaption
        End Get
        Set(ByVal Value As String)
            If myCaption <> value Then
                myCaption = value
            End If
        End Set
    End Property
End Class

Public Class Cproperty
    ' Define a read-only property.
    Private myCaption As String = "C Default caption"

    Public ReadOnly Property Caption() As String
        Get
            Return myCaption
        End Get
        'No setting is allowed because this property is read-only.
    End Property
End Class


Class propertyattributesenum

    Public Shared Function Main() As Integer
        Console.WriteLine(ControlChars.CrLf & "Reflection.PropertyAttributes")

        ' Determine whether a property exists, and change its value.
        Dim Mypropertya As New Aproperty()
        Dim Mypropertyb As New Bproperty()
        Dim Mypropertyc As New Cproperty()

        Console.Write(ControlChars.CrLf & "1. Mypropertya.Caption = " & _
           Mypropertya.Caption)

        Console.Write(ControlChars.CrLf & "1. Mypropertyb.Caption = " & _
           Mypropertyb.Caption)

        Console.Write(ControlChars.CrLf & "1. Mypropertyc.Caption = " & _
           Mypropertyc.Caption)

        ' Only Mypropertya can be changed because Mypropertyb is read-only.
        Mypropertya.Caption = "A- This is changed."
        Mypropertyb.Caption = "B- This is changed."
        ' Note that Mypropertyc is not changed, because it is read-only.
        Console.Write(ControlChars.CrLf & ControlChars.CrLf & _
           "2. Mypropertya.Caption = " & Mypropertya.Caption)

        Console.Write(ControlChars.CrLf & "2. Mypropertyb.Caption = " & _
           Mypropertyb.Caption)

        Console.Write(ControlChars.CrLf + "2. Mypropertyc.Caption = " & _
           Mypropertyc.Caption)

        ' Get the PropertyAttributes Enumeration of the property.
        ' Get the type.
        Dim MyTypea As Type = Type.GetType("Aproperty")
        Dim MyTypeb As Type = Type.GetType("Bproperty")
        Dim MyTypec As Type = Type.GetType("Cproperty")

        ' Get the property attributes.
        Dim Mypropertyinfoa As PropertyInfo = MyTypea.GetProperty("Caption")
        Dim Myattributesa As PropertyAttributes = Mypropertyinfoa.Attributes
        Dim Mypropertyinfob As PropertyInfo = MyTypeb.GetProperty("Item")
        Dim Myattributesb As PropertyAttributes = Mypropertyinfob.Attributes
        Dim Mypropertyinfoc As PropertyInfo = MyTypec.GetProperty("Caption")
        Dim Myattributesc As PropertyAttributes = Mypropertyinfoc.Attributes

        ' Display the property attributes value.
        Console.Write(ControlChars.CrLf & ControlChars.CrLf & "a- " & _
           Myattributesa.ToString())

        Console.Write(ControlChars.CrLf & "b- " & Myattributesb.ToString())

        Console.Write(ControlChars.CrLf & "c- " & Myattributesc.ToString())
        Return 0
    End Function'    End Function
End Class

' This example displays the following output to the console
'
' Reflection.PropertyAttributes
'
' 1. Mypropertya.Caption = A Default caption
' 1. Mypropertyb.Caption = B Default caption
' 1. Mypropertyc.Caption = C Default caption
'
' 2. Mypropertya.Caption = A- This is changed.
' 2. Mypropertyb.Caption = B- This is changed.
' 2. Mypropertyc.Caption = C Default caption
'
' a- None
' b- None
' c- None

Uwagi

Aby uzyskać klasę PropertyAttributes, najpierw pobierz klasę Type. W pliku Typepobierz element PropertyInfo. W pliku PropertyInfopobierz element Attributes.

Wyliczone wartości to liczba reprezentująca bitowe OR atrybutów zaimplementowanych w metodzie .

Dotyczy