FileInfo.CopyTo 方法

定义

将现有文件复制到新文件。

重载

CopyTo(String)

将现有文件复制到新文件,不允许覆盖现有文件。

CopyTo(String, Boolean)

将现有文件复制到新文件,允许覆盖现有文件。

CopyTo(String)

Source:
FileInfo.cs
Source:
FileInfo.cs
Source:
FileInfo.cs

将现有文件复制到新文件,不允许覆盖现有文件。

public:
 System::IO::FileInfo ^ CopyTo(System::String ^ destFileName);
public System.IO.FileInfo CopyTo (string destFileName);
member this.CopyTo : string -> System.IO.FileInfo
Public Function CopyTo (destFileName As String) As FileInfo

参数

destFileName
String

要复制到的新文件的名称。

返回

带有完全限定路径的新文件。

例外

.NET Framework 和 .NET Core 版本早于 2.1: destFileName 为空、仅包含空格或包含无效字符。

出现错误,或目标文件已存在。

调用方没有所要求的权限。

destFileNamenull

传入一个目录路径或此文件将被移至其他驱动器。

destFileName 中指定的此目录不存在。

指定的路径和/或文件名超过了系统定义的最大长度。

destFileName 在其字符串中包含冒号 (:) ,但并未指定卷。

示例

下面的示例演示 方法的两个 CopyTo 重载。

using namespace System;
using namespace System::IO;

int main()
{
   String^ path = "c:\\MyTest.txt";
   String^ path2 = "c:\\MyTest.txttemp";
   FileInfo^ fi1 = gcnew FileInfo( path );
   FileInfo^ fi2 = gcnew FileInfo( path2 );
   try
   {
      // Create the file and clean up handles.
      FileStream^ fs = fi1->Create();
      if ( fs )
         delete (IDisposable^)fs;
      
      //Ensure that the target does not exist.
      fi2->Delete();
      
      //Copy the file.
      fi1->CopyTo( path2 );
      Console::WriteLine( "{0} was copied to {1}.", path, path2 );
      
      //Try to copy it again, which should succeed.
      fi1->CopyTo( path2, true );
      Console::WriteLine( "The second Copy operation succeeded, which is expected." );
   }
   catch ( Exception^ ) 
   {
      Console::WriteLine( "Double copying was not allowed, which is not expected." );
   }
}
//This code produces output similar to the following; 
//results may vary based on the computer/file structure/etc.:
//
//The second Copy operation succeeded, which is expected.
using System;
using System.IO;

class Test
{

    public static void Main()
    {
        string path = @"c:\SoureFile.txt";
        string path2 = @"c:\NewFile.txt";
        FileInfo fi1 = new FileInfo(path);
        FileInfo fi2 = new FileInfo(path2);

        try
        {
            // Create the source file.
            using (FileStream fs = fi1.Create()) { }

            //Ensure that the target file does not exist.
            if (File.Exists(path2))
            {
                fi2.Delete();
            }

            //Copy the file.f
            fi1.CopyTo(path2);
            Console.WriteLine("{0} was copied to {1}.", path, path2);
        }
        catch (IOException ioex)
        {
            Console.WriteLine(ioex.Message);
        }
    }
}
Imports System.IO

Public Class Test

    Public Shared Sub Main()
        'Specify the directories you want to manipulate.
        Dim path As String = "c:\SourceFile.txt"
        Dim path2 As String = "c:\NewFile.txt"
        Dim fi As FileInfo = New FileInfo(path)
        Dim fi2 As FileInfo = New FileInfo(path2)

        Try
            Using fs As FileStream = fi.Create()
            End Using

            'Ensure that the target does not exist.
            If File.Exists(path2) Then
                fi2.Delete()
            End If
            
            'Copy the file.
            fi.CopyTo(path2)
            Console.WriteLine("{0} was copied to {1}.", path, path2)

        Catch ioex As IOException
            Console.WriteLine(ioex.Message)
        End Try
    End Sub
End Class

以下示例演示如何将一个文件复制到另一个文件,如果目标文件已存在,则会引发异常。

using namespace System;
using namespace System::IO;
int main()
{
   try
   {
      
      // Create a reference to a file, which might or might not exist.
      // If it does not exist, it is not yet created.
      FileInfo^ fi = gcnew FileInfo( "temp.txt" );
      
      // Create a writer, ready to add entries to the file.
      StreamWriter^ sw = fi->AppendText();
      sw->WriteLine( "Add as many lines as you like..." );
      sw->WriteLine( "Add another line to the output..." );
      sw->Flush();
      sw->Close();
      
      // Get the information out of the file and display it.
      StreamReader^ sr = gcnew StreamReader( fi->OpenRead() );
      Console::WriteLine( "This is the information in the first file:" );
      while ( sr->Peek() != -1 )
            Console::WriteLine( sr->ReadLine() );
      
      // Copy this file to another file. The file will not be overwritten if it already exists.
      FileInfo^ newfi = fi->CopyTo( "newTemp.txt" );
      
      // Get the information out of the new file and display it.* sr = new StreamReader(newfi->OpenRead());
      Console::WriteLine( "{0}This is the information in the second file:", Environment::NewLine );
      while ( sr->Peek() != -1 )
            Console::WriteLine( sr->ReadLine() );
   }
   catch ( Exception^ e ) 
   {
      Console::WriteLine( e->Message );
   }

}
//This code produces output similar to the following; 
//results may vary based on the computer/file structure/etc.:
//
//This is the information in the first file:
//Add as many lines as you like...
//Add another line to the output...
//
//This is the information in the second file:
using System;
using System.IO;

public class CopyToTest
{
    public static void Main()
    {
        try
        {
            // Create a reference to a file, which might or might not exist.
            // If it does not exist, it is not yet created.
            FileInfo fi = new FileInfo("temp.txt");
            // Create a writer, ready to add entries to the file.
            StreamWriter sw = fi.AppendText();
            sw.WriteLine("Add as many lines as you like...");
            sw.WriteLine("Add another line to the output...");
            sw.Flush();
            sw.Close();
            // Get the information out of the file and display it.
            StreamReader sr = new StreamReader(fi.OpenRead());
            Console.WriteLine("This is the information in the first file:");
            while (sr.Peek() != -1)
                Console.WriteLine(sr.ReadLine());
            // Copy this file to another file. The file will not be overwritten if it already exists.
            FileInfo newfi = fi.CopyTo("newTemp.txt");
            // Get the information out of the new file and display it.
            sr = new StreamReader(newfi.OpenRead());
            Console.WriteLine("{0}This is the information in the second file:", Environment.NewLine);
            while (sr.Peek() != -1)
                Console.WriteLine(sr.ReadLine());
        }
        catch(Exception e)
        {
            Console.WriteLine(e.Message);
        }
    }
}
//This code produces output similar to the following;
//results may vary based on the computer/file structure/etc.:
//
//This is the information in the first file:
//Add as many lines as you like...
//Add another line to the output...

//This is the information in the second file:
//Add as many lines as you like...
//Add another line to the output...
Imports System.IO

Public Class CopyToTest
    Public Shared Sub Main()
        Try
            ' Create a reference to a file, which might or might not exist.
            ' If it does not exist, it is not yet created.
            Dim fi As New FileInfo("temp.txt")
            ' Create a writer, ready to add entries to the file.
            Dim sw As StreamWriter = fi.AppendText()
            sw.WriteLine("Add as many lines as you like...")
            sw.WriteLine("Add another line to the output...")
            sw.Flush()
            sw.Close()
            ' Get the information out of the file and display it.
            Dim sr As New StreamReader(fi.OpenRead())
            Console.WriteLine("This is the information in the first file:")
            While sr.Peek() <> -1
                Console.WriteLine(sr.ReadLine())
            End While
            ' Copy this file to another file.
            Dim newfi As FileInfo = fi.CopyTo("newTemp.txt")
            ' Get the information out of the new file and display it.
            sr = New StreamReader(newfi.OpenRead())
            Console.WriteLine("{0}This is the information in the second file:", Environment.NewLine)
            While sr.Peek() <> -1
                Console.WriteLine(sr.ReadLine())
            End While
        Catch e As Exception
            Console.WriteLine(e.Message)
        End Try
    End Sub
End Class
'This code produces output similar to the following; 
'results may vary based on the computer/file structure/etc.:
'
'This is the information in the first file:
'Add as many lines as you like...
'Add another line to the output...
'
'This is the information in the second file:
'Add as many lines as you like...
'Add another line to the output...

注解

CopyTo(String, Boolean)使用 方法允许覆盖现有文件。

注意

尽可能避免使用短文件名 (,如 XXXXXX~1.XXX) 使用此方法。 如果两个文件具有等效的短文件名,则此方法可能会失败并引发异常和/或导致不良行为

另请参阅

适用于

CopyTo(String, Boolean)

Source:
FileInfo.cs
Source:
FileInfo.cs
Source:
FileInfo.cs

将现有文件复制到新文件,允许覆盖现有文件。

public:
 System::IO::FileInfo ^ CopyTo(System::String ^ destFileName, bool overwrite);
public System.IO.FileInfo CopyTo (string destFileName, bool overwrite);
member this.CopyTo : string * bool -> System.IO.FileInfo
Public Function CopyTo (destFileName As String, overwrite As Boolean) As FileInfo

参数

destFileName
String

要复制到的新文件的名称。

overwrite
Boolean

如果允许覆盖现有文件,则为 true;否则为 false

返回

为新文件;如果 overwritetrue,则为现有文件的覆盖。 如果文件存在且 overwritefalse,则引发 IOException

例外

.NET Framework 和 .NET Core 版本早于 2.1: destFileName 为空、仅包含空格或包含无效字符。

出现错误,或目标文件已存在,且 overwritefalse

调用方没有所要求的权限。

destFileNamenull

destFileName 中指定的此目录不存在。

传入一个目录路径或此文件将被移至其他驱动器。

指定的路径和/或文件名超过了系统定义的最大长度。

destFileName 在字符串中间包含一个冒号 (:)。

示例

下面的示例演示 方法的两个 CopyTo 重载。

using namespace System;
using namespace System::IO;

int main()
{
   String^ path = "c:\\MyTest.txt";
   String^ path2 = "c:\\MyTest.txttemp";
   FileInfo^ fi1 = gcnew FileInfo( path );
   FileInfo^ fi2 = gcnew FileInfo( path2 );
   try
   {
      // Create the file and clean up handles.
      FileStream^ fs = fi1->Create();
      if ( fs )
         delete (IDisposable^)fs;
      
      //Ensure that the target does not exist.
      fi2->Delete();
      
      //Copy the file.
      fi1->CopyTo( path2 );
      Console::WriteLine( "{0} was copied to {1}.", path, path2 );
      
      //Try to copy it again, which should succeed.
      fi1->CopyTo( path2, true );
      Console::WriteLine( "The second Copy operation succeeded, which is expected." );
   }
   catch ( Exception^ ) 
   {
      Console::WriteLine( "Double copying was not allowed, which is not expected." );
   }
}
//This code produces output similar to the following; 
//results may vary based on the computer/file structure/etc.:
//
//The second Copy operation succeeded, which is expected.
using System;
using System.IO;

class Test
{

    public static void Main()
    {
        string path = @"c:\SoureFile.txt";
        string path2 = @"c:\NewFile.txt";
        FileInfo fi1 = new FileInfo(path);
        FileInfo fi2 = new FileInfo(path2);

        try
        {
            // Create the source file.
            using (FileStream fs = fi1.Create()) { }

            //Ensure that the target file does not exist.
            if (File.Exists(path2))
            {
                fi2.Delete();
            }

            //Copy the file.f
            fi1.CopyTo(path2);
            Console.WriteLine("{0} was copied to {1}.", path, path2);
        }
        catch (IOException ioex)
        {
            Console.WriteLine(ioex.Message);
        }
    }
}
Imports System.IO

Public Class Test

    Public Shared Sub Main()
        'Specify the directories you want to manipulate.
        Dim path As String = "c:\SourceFile.txt"
        Dim path2 As String = "c:\NewFile.txt"
        Dim fi As FileInfo = New FileInfo(path)
        Dim fi2 As FileInfo = New FileInfo(path2)

        Try
            Using fs As FileStream = fi.Create()
            End Using

            'Ensure that the target does not exist.
            If File.Exists(path2) Then
                fi2.Delete()
            End If
            
            'Copy the file.
            fi.CopyTo(path2)
            Console.WriteLine("{0} was copied to {1}.", path, path2)

        Catch ioex As IOException
            Console.WriteLine(ioex.Message)
        End Try
    End Sub
End Class

以下示例演示如何将一个文件复制到另一个文件,并指定是否覆盖已存在的文件。

using namespace System;
using namespace System::IO;
int main()
{
   
   // Create a reference to a file, which might or might not exist.
   // If it does not exist, it is not yet created.
   FileInfo^ fi = gcnew FileInfo( "temp.txt" );
   
   // Create a writer, ready to add entries to the file.
   StreamWriter^ sw = fi->AppendText();
   sw->WriteLine( "Add as many lines as you like..." );
   sw->WriteLine( "Add another line to the output..." );
   sw->Flush();
   sw->Close();
   
   // Get the information out of the file and display it.
   StreamReader^ sr = gcnew StreamReader( fi->OpenRead() );
   Console::WriteLine( "This is the information in the first file:" );
   while ( sr->Peek() != -1 )
      Console::WriteLine( sr->ReadLine() );

   
   // Copy this file to another file. The true parameter specifies
   // that the file will be overwritten if it already exists.
   FileInfo^ newfi = fi->CopyTo( "newTemp.txt", true );
   
   // Get the information out of the new file and display it.* sr = new StreamReader( newfi->OpenRead() );
   Console::WriteLine( "{0}This is the information in the second file:", Environment::NewLine );
   while ( sr->Peek() != -1 )
      Console::WriteLine( sr->ReadLine() );
}
//This code produces output similar to the following; 
//results may vary based on the computer/file structure/etc.:
//
//This is the information in the first file:
//Add as many lines as you like...
//Add another line to the output...
//This is the information in the second file:
//
using System;
using System.IO;

public class CopyToTest
{
    public static void Main()
    {
        // Create a reference to a file, which might or might not exist.
        // If it does not exist, it is not yet created.
        FileInfo fi = new FileInfo("temp.txt");
        // Create a writer, ready to add entries to the file.
        StreamWriter sw = fi.AppendText();
        sw.WriteLine("Add as many lines as you like...");
        sw.WriteLine("Add another line to the output...");
        sw.Flush();
        sw.Close();
        // Get the information out of the file and display it.
        StreamReader sr = new StreamReader( fi.OpenRead() );
        Console.WriteLine("This is the information in the first file:");
        while (sr.Peek() != -1)
            Console.WriteLine( sr.ReadLine() );
        // Copy this file to another file. The true parameter specifies
        // that the file will be overwritten if it already exists.
        FileInfo newfi = fi.CopyTo("newTemp.txt", true);
        // Get the information out of the new file and display it.
        sr = new StreamReader( newfi.OpenRead() );
        Console.WriteLine("{0}This is the information in the second file:", Environment.NewLine);
        while (sr.Peek() != -1)
            Console.WriteLine( sr.ReadLine() );
    }
}
//This code produces output similar to the following;
//results may vary based on the computer/file structure/etc.:
//
//This is the information in the first file:
//Add as many lines as you like...
//Add another line to the output...
//Add as many lines as you like...
//Add another line to the output...

//This is the information in the second file:
//Add as many lines as you like...
//Add another line to the output...
//Add as many lines as you like...
//Add another line to the output...
Imports System.IO

Public Class CopyToTest
    Public Shared Sub Main()
        ' Create a reference to a file, which might or might not exist.
        ' If it does not exist, it is not yet created.
        Dim fi As New FileInfo("temp.txt")
        ' Create a writer, ready to add entries to the file.
        Dim sw As StreamWriter = fi.AppendText()
        sw.WriteLine("Add as many lines as you like...")
        sw.WriteLine("Add another line to the output...")
        sw.Flush()
        sw.Close()
        ' Get the information out of the file and display it.
        Dim sr As New StreamReader(fi.OpenRead())
        Console.WriteLine("This is the information in the first file:")
        While sr.Peek() <> -1
            Console.WriteLine(sr.ReadLine())
        End While
        ' Copy this file to another file. The true parameter specifies 
        ' that the file will be overwritten if it already exists.
        Dim newfi As FileInfo = fi.CopyTo("newTemp.txt", True)
        ' Get the information out of the new file and display it.
        sr = New StreamReader(newfi.OpenRead())
        Console.WriteLine("{0}This is the information in the second file:", Environment.NewLine)
        While sr.Peek() <> -1
            Console.WriteLine(sr.ReadLine())
        End While
    End Sub
End Class
'This code produces output similar to the following; 
'results may vary based on the computer/file structure/etc.:
'
'This is the information in the first file:
'Add as many lines as you like...
'Add another line to the output...
'
'This is the information in the second file:
'Add as many lines as you like...
'Add another line to the output...
'

注解

使用此方法可允许或阻止覆盖现有文件。 默认情况下, CopyTo(String) 使用 方法防止覆盖现有文件。

注意

尽可能避免使用短文件名 (,如 XXXXXX~1.XXX) 使用此方法。 如果两个文件具有等效的短文件名,则此方法可能会失败并引发异常和/或导致不良行为

另请参阅

适用于