INF AddReg Directive
An AddReg directive references one or more INF-writer-defined add-registry-sections that are used to modify or create registry information.
[DDInstall] | [DDInstall.HW] | [DDInstall.CoInstallers] | [ClassInstall32] | [ClassInstall32.ntx86] | [ClassInstall32.ntia64] | (Windows XP and later versions of Windows) [ClassInstall32.ntamd64] (Windows XP and later versions of Windows) [install-interface-section] | [service-install-section] | [event-log-install] | [add-interface-section] AddReg=add-registry-section[,add-registry-section] ...
Each add-registry section can have entries to do the following:
- Add new keys, possibly with initial value entries, to the registry.
- Add new value entries to existing registry keys.
- Modify existing value entries of particular keys in the registry.
Each named add-registry section referenced by an AddReg directive has the following format:
[add-registry-section] reg-root, [subkey],[value-entry-name],[flags],[value][,[value]] reg-root, [subkey],[value-entry-name],[flags],[value][,[value]] ... [[add-registry-section.security] "security-descriptor-string"]
An add-registry-section can have any number of entries, each on a separate line. An INF can also contain one or more optional add-registry-section.security sections, each specifying a security descriptor that is applied to all registry values described within a named add-registry-section.
Relative root, in which keys that are specified by using this abbreviation are relative to the registry key associated with the INF section in which this AddReg directive appears, as indicated in the following table.
|INF Section Containing AddReg Directive||Registry Key Referenced by HKR|
|INF DDInstall section||The device's software key|
|INF DDInstall.HW section||The device's hardware key|
|INF [service-install-section] section||The Services key|
|INF [event-log-install] section||The EventLog key|
NoteHKR cannot be used in an add-registry-section referenced from an INF DefaultInstall section.
For more information about driver information that is stored under the HKEY_LOCAL_MACHINE root, see Registry Trees and Keys for Devices and Drivers.
This optional value, formed either as a %strkey% token defined in a Strings section of the INF or as a registry path under the given reg-root (key1\key2\key3...), specifies one of the following:
- A new subkey to be added to the registry at the end of the given registry path.
- An existing subkey in which the additional values specified in this entry is written (possibly replacing the value of an existing named value entry of the given subkey).
- Both a new subkey to be added to the registry together with its initial value entry.
This optional value either names an existing value entry in the given (existing) subkey or creates the name of a new value entry to be added in the specified subkey, whether it already exists or is a new key to be added to the registry. This value can be expressed either as "quoted string" or as a %strkey% token that is defined in the INF's Strings section. (If this is omitted for a string-type value, the value-entry-name is the default "unnamed" value entry for this key.)
The operating system supports some system-defined special value-entry-name keywords. See the end of this Remarks section for more information.
This optional hexadecimal value, expressed as an ORed bitmask of system-defined low word and high word flag values, defines the data type for a value entry and/or controls the add-registry operation.
Bitmask values for each of these flags are as follows:
Append a given value to that of an existing named value entry. This flag is valid only if FLG_ADDREG_TYPE_MULTI_SZ is also set. The specified string value is not appended if it already exists.
(Windows XP and later versions of Windows.) This is the same as FLG_ADDREG_KEYONLY but also works in a del-registry-section of an INF DelReg directive.
Note This value is the default type for a specified value entry, so the flags value can be omitted from any reg-root= line in an add-registry-section that operates on a value entry of this type.
The given value entry and/or value is of the registry type REG_MULTI_SZ. The value field that follows can be a list of strings separated by commas. This specification does not require any NULL terminator for a given string value.
This optionally specifies a new value for the specified value-entry-name to be added to the given registry key. Such a value can be a "replacement" value for an existing named value entry in an existing key, a value to be appended (flag value 0x00010008) to an existing named REG_MULTI_SZ-type value entry in an existing key, a new value entry to be written into an existing key, or the initial value entry for a new subkey to be added to the registry.
The expression of such a value depends on the registry type specified for the flag, as follows:
- A registry string-type value can be expressed either as a "quoted string" or as a %strkey% token defined in a Strings section of the INF file. Such an INF-specified value does not have to include a NULL terminator at the end of each string.
- A registry numerical-type value can be expressed as a hexadecimal (by using 0x notation) or decimal number.
Specifies a security descriptor, to be applied to all registry entries created by the named add-registry-section. The security-descriptor-string is a string with tokens to indicate the DACL (D:) security component.
If an add-registry-section.security section is not specified, registry entries inherit the security settings of the parent key.
If an add-registry-section.security section is specified, the following ACE's must be included so that installations and upgrades of devices and system service packs can occur:
- (A;;GA;;;SY) − Grants all access to the local system.
- (A;;GA;;;BA) − Grants all access to built-in administrators.
Do not specify ACE strings that grant write access to nonprivileged users.
For information about security descriptor strings, see Security Descriptor Definition Language (Windows). For information about the format of security descriptor strings, see Security Descriptor Definition Language (Windows).
For more information about how to specify security descriptors, see Creating Secure Device Installations.
An AddReg directive can be specified under any of the sections shown in the formal syntax statement above. This directive can also be specified under any of the following INF-writer-defined sections:
- A service-install-section or event-log-install section referenced by the AddService directive in an INF DDInstall.Services section.
- An add-interface-section referenced by the AddInterface directive in an INF DDInstall.Interfaces section.
- An install-interface-section referenced in an INF InterfaceInstall32 section.
Each add-registry-section name must be unique to the INF file, but it can be referenced by AddReg directives in other sections of the same INF. Each section name must follow the general rules for defining section names described in General Syntax Rules for INF Files.
Note The lower-order bit of the low word in a flag value distinguishes between character and binary data.
To represent a number of a registry type other than one of the predefined REG_XXX types, specify a new type number in the high word of the flag ORed with FLG_ADDREG_BINVALUETYPE in its low word. The data for such a value must be specified in binary format as a sequence of bytes separated by commas. For example, to store 16 bytes of data of a new registry data type, such as 0x38, as a value entry, the add-registry section entry would be something like the following:
This technique can be used to define new registry types for numeric values, but not for values of type REG_EXPAND_SZ, REG_MULTI_SZ, REG_NONE, or REG_SZ.
Special value-entry-name Keywords
Special keywords are defined for use in the HKR AddReg entries. The format for the entries that use these keywords is as follows:
[HKR,,DeviceCharacteristics,0x10001,characteristics] [HKR,,DeviceType,0x10001,device-type] [HKR,,Security,,security-descriptor-string] [HKR,,UpperFilters,0x10000,service-name] [HKR,,LowerFilters,0x10000,service-name] [HKR,,Exclusive,0x10001,exclusive-device] [HKR,,EnumPropPages32,,"prop-provider.dll,provider-entry-point"] [HKR,,LocationInformationOverride,,"text-string"] [HKR,,ResourcePickerTags,,"text-string"] [HKR,,ResourcePickerExceptions,,"text-string"] ,
The following describes the HKR AddReg entries that use these special keywords:
A DeviceCharacteristics HKR AddReg entry specifies characteristics for the device. The characteristics value is a numeric value that is the result of using OR on one or more FILE_* file characteristics values, which are defined in Wdm.h and Ntddk.h.
Only the following values can be specified in an INF:
#define FILE_REMOVABLE_MEDIA 0x00000001 #define FILE_READ_ONLY_DEVICE 0x00000002 #define FILE_FLOPPY_DISKETTE 0x00000004 #define FILE_WRITE_ONCE_MEDIA 0x00000008 #define FILE_DEVICE_SECURE_OPEN 0x00000100
For a description of these values, see IoCreateDevice.
The characteristics values, which are specified by using a DeviceCharacteristics entry, are ORed with those specified in each call to IoCreateDevice that creates a device object on the device stack. The OR operation occurs after all device objects are added, but before the device is started.
The characteristics value (including a value of zero) overrides any class-wide device characteristics that were specified in the associated class installer INF.
For more information about device characteristics, see Specifying Device Characteristics.
A DeviceType HKR AddReg entry specifies a device type for the device. The device-type is the numeric value of a FILE_DEVICE_XXX constant defined in Wdm.h or Ntddk.h. The flag value of 0x10001 specifies that the device-type value is a REG_DWORD. For more information, see Specifying Device Types.
A class-installer INF should specify the device type that applies to all, or almost all, of the devices in the class. For example, if the devices in the class are of type FILE_DEVICE_CD_ROM, specify a device-type of 0x02. If a device INF specifies a value for DeviceType, it overrides the value set by the class installer, if any. If the class or device INF specifies a DeviceType value, the PnP manager applies that type to the physical device object (PDO) created by the device's bus driver.
A class-installer INF can specify a security descriptor for a device class. A device INF can specify a security descriptor for an individual device, overriding the security for the class. If the class and/or device INF specifies a security-descriptor-string, the PnP manager propagates the descriptor to all the device objects ( DOs) for a device. This includes the function device object (FDO), optional filter DOs, and the PDO.
For information about the format of security descriptor strings, see the Microsoft Windows SDK documentation.
For more information about how to specify security descriptors, see Creating Secure Device Installations.
An UpperFilters HKR AddReg entry specifies a PnP upper-filter driver. This entry in a DDInstall.HW section defines one or more device-specific upper-filter drivers. In a ClassInstall32 section, this entry defines one or more class-wide upper-filter drivers.
A LowerFilters HKR AddReg entry specifies a PnP lower-filter driver. This entry in a DDInstall.HW section defines one or more device-specific lower-filter drivers. In a ClassInstall32 section, this entry defines one or more class-wide lower-filter drivers.
An Exclusive HKR AddReg entry, if it exists and is set to "1", specifies that the device is an exclusive device. Otherwise the device is not treated as exclusive. For more information, see Specifying Exclusive Access to Device Objects.
An EnumPropPages32 HKR AddReg entry specifies the name of a dynamic-link library (DLL) file that is a device-specific property page provider. It also specifies the name of the ExtensionPropSheetPageProc callback function as implemented by the DLL. For more information about property pages and functions, see the Microsoft Windows Software Development Kit (SDK) for Windows 7 and .NET Framework 4.0.
Important Both the name of the DLL and ExtensionPropSheetPageProc callback function must be enclosed together within quotation marks (" ").
(Windows XP and later versions of Windows) A LocationInformationOverride HKR AddReg entry can be used to specify a text string that describes a device's physical location. It overrides the LocationInformation string that the device's bus driver supplies in response to an IRP_MN_QUERY_DEVICE_TEXT request.
An AddReg directive referenced the (SCSI) Miniport_EventLog_AddReg section in this example, under an INF-writer-defined section referenced by the AddService directive in a DDInstall.Services section of this INF.
[Miniport_EventLog_AddReg] HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll" ; double quotation marks delimiters in preceding entry prevent truncation ; if line wraps HKR,,TypesSupported,0x00010001,7