Touchscreen laptop system testing

This topic describes tests for touchscreen laptop systems.

Dn457895.wedge(en-us,VS.85).gifOnscreen keyboard deployment (touchscreen laptop systems only)

  1. Power up the system and go to the Start screen.
  2. Perform Touch keyboard deployment steps.

    Validation: The onscreen keyboard should not deploy.

  3. Rotate the system (Landscape to Portrait and back).

    Validation: Screen orientation should not change.

Docking station testing

Dn457895.wedge(en-us,VS.85).gifDocking the system in slate mode (convertibles with docking system only)

  1. Have the GPIO docking system available (with a USB keyboard attached if the slate device has no keyboard). For distinguishing between docking and laptops/slate conversion, see Docking versus laptop slate conversion. For convertibles, configure the system in slate mode (see Slate/laptop mode conversion steps).
  2. Start with the system in slate mode and attach it to the docking system.
  3. Perform Touch keyboard deployment steps.

    Validation: The onscreen keyboard should deploy.

  4. Rotate the system (Landscape to Portrait and back).

    Validation: Screen orientation should not change.

Physical buttons testing

The system can expose the following set of buttons to the users:

  • Power button - required
  • Volume +/- buttons - required
  • Windows button - required
  • Rotation lock button - optional

Dn457895.wedge(en-us,VS.85).gifButton behavior

  • For each of the buttons and button combinations that are listed in the following table, validate that the expected behavior occurs in all cases:
    Button or combinationPress experiencePress and hold experience
    Windows Navigate to Start ScreenN/A
    Volume Up Increase volumeRapid volume increase
    Volume Down Decrease volumeRapid volume decrease
    Rotation Lock Rotation lock toggledN/A
    PowerPower on Connected Standby

    Connected Standby systems

    • HoldTime<2s : enter CS
    • 2<=HoldTime<=10s : slide to power off UX
    • HoldTime>10s : power off

    Non-connected Standby systems

    • Holdtime< 4s :enter sleep [optional]
    • Holdtime>=4s :power off the device
    Windows + Volume Up Launch or exit NarratorN/A
    Windows + Volume Down Perform a screen capture N/A
    Windows + Power Secure attention sequence (Display lock screen) N/A

     

 

 

Send comments about this topic to Microsoft

Показ:
© 2015 Microsoft