EN
Данное содержимое не доступно на вашем языке, используйте версию на английском языке.

WLAN Wake - GTK Refresh - Functional

This automated test validates the NOT wake by GTK refresh functionality. The device should enter the D2 state after pressing power button for two minutes. The device should not wake by GTK refresh during the D2 state.

Test details

Associated requirements

Device.Network.WLAN.Base.MeetScanAndConnReq Device.Network.WLAN.CSBBase.MeetScanAndConnReq Device.Network.WLAN.CSBNLO.SupportNetworkListOffload Device.Network.WLAN.NLO.SupportNetworkListOffload

See the device hardware requirements.

Platforms

Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86

Expected run time

~14 minutes

Categories

Certification Functional

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.

Troubleshooting

For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.

More information

Command syntax

ParameterDescription

TestDeviceSupports5ghz

Determines whether or not the device supports 5 GHz.

Default value: True

AP1Password

The root password for the first physical access point.

Default value: password

AP1IPAddress

The IP address of the WAN port of the first physical access point.

Default value: 192.168.2.2

AP2Password

The root password for the second physical access point.

Default value: password

AP2IPAddress

The root password for the second physical access point.

Default value: 192.168.2.3

 

 

 

Добавления сообщества

ДОБАВИТЬ
Показ:
© 2015 Microsoft