Использование кэширования в модели автоматизации пользовательского интерфейса

  • Статья

Обновлен: Ноябрь 2007

В этом разделе показано, как реализовать кэширование свойств AutomationElement и шаблонов элемента управления.

Активируйте запрос кэша

  1. Создайте таблицу CacheRequest.

  2. Укажите свойства и шаблоны для кэширования с помощью Add.

  3. Задайте область кэширования, установив свойство TreeScope.

  4. Укажите представление поддерева, установив свойство TreeFilter.

  5. Если требуется повысить эффективность работы, не извлекая полной ссылки на объекты, присвойте свойству AutomationElementMode значение None. (Это сделает невозможным получение текущих значений этих объектов.)

  6. Активируйте запрос с помощью Activate в блоке using (Using в Microsoft Visual Basic .NET).

После получения объектов AutomationElement или подписки на события, отключите запрос с помощью Pop (если использовалась Push) или уничтожив объект, созданный по Activate. (Используйте Activate в блоке using(Using в Microsoft Visual Basic .NET).

Свойства элемента AutomationElement кэша

  1. Пока CacheRequest активен, следует получить объекты AutomationElement с помощью FindFirst или FindAll или получить AutomationElement в качестве источника события, зарегистрированного в тот момент, когда CacheRequest был активным. (Кэш можно также создать, передавая CacheRequest в GetUpdatedCache или в один из методов TreeWalker.)

  2. Используйте свойство GetCachedPropertyValue или извлеките свойство из свойства Cached объекта AutomationElement.

Получение кэшированных шаблонов и их свойств

  1. Пока CacheRequest активен, следует получить объекты AutomationElement с помощью FindFirst или FindAll или получить AutomationElement в качестве источника события, зарегистрированного в тот момент, когда CacheRequest был активным. (Кэш можно также создать, передавая CacheRequest в GetUpdatedCache или в один из методов TreeWalker.)

  2. Используйте GetCachedPattern или TryGetCachedPattern для извлечения кэшированного шаблона.

  3. Получите значения свойства из свойства Cached шаблона элемента управления.

Пример

В следующем примере показаны различные аспекты кэширования, использующие Activate для активации CacheRequest.

''' <summary>
''' Caches and retrieves properties for a list item by using CacheRequest.Activate.
''' </summary>
''' <param name="elementList">Element from which to retrieve a child element.</param>
''' <remarks>
''' This code demonstrates various aspects of caching. It is not intended to be 
''' an example of a useful method.
''' </remarks>
Private Sub CachePropertiesByActivate(ByVal elementList As AutomationElement)

    ' Set up the request.
    Dim myCacheRequest As New CacheRequest()
    myCacheRequest.Add(AutomationElement.NameProperty)
    myCacheRequest.Add(AutomationElement.IsEnabledProperty)
    myCacheRequest.Add(SelectionItemPattern.Pattern)
    myCacheRequest.Add(SelectionItemPattern.SelectionContainerProperty)

    Dim elementListItem As AutomationElement

    ' Obtain an element and cache the requested items.
    Using myCacheRequest.Activate()
        Dim myCondition As New PropertyCondition( _
            AutomationElement.IsSelectionItemPatternAvailableProperty, True)
        elementListItem = elementList.FindFirst(TreeScope.Children, myCondition)
    End Using


    ' The CacheRequest is now inactive.
    ' Retrieve the cached property and pattern.
    Dim pattern As SelectionItemPattern
    Dim itemName As String
    Try
        itemName = elementListItem.Cached.Name
        pattern = DirectCast(elementListItem.GetCachedPattern(SelectionItemPattern.Pattern), _
            SelectionItemPattern)
    Catch ex As InvalidOperationException
        Console.WriteLine("Object was not in cache.")
        Return
    End Try
    ' Alternatively, you can use TryGetCachedPattern to retrieve the cached pattern.
    Dim cachedPattern As Object = Nothing
    If True = elementListItem.TryGetCachedPattern(SelectionItemPattern.Pattern, cachedPattern) Then
        pattern = DirectCast(cachedPattern, SelectionItemPattern)
    End If

    ' Specified pattern properties are also in the cache.
    Dim parentList As AutomationElement = pattern.Cached.SelectionContainer

    ' The following line will raise an exception, because the HelpText property was not cached.
    '** String itemHelp = elementListItem.Cached.HelpText; **

    ' Similarly, pattern properties that were not specified in the CacheRequest cannot be 
    ' retrieved from the cache. This would raise an exception.
    '** bool selected = pattern.Cached.IsSelected; **

    ' This is still a valid call, even though the property is in the cache.
    ' Of course, the cached value and the current value are not guaranteed to be the same.
    itemName = elementListItem.Current.Name
End Sub 'CachePropertiesByActivate


/// <summary>
/// Caches and retrieves properties for a list item by using CacheRequest.Activate.
/// </summary>
/// <param name="elementList">Element from which to retrieve a child element.</param>
/// <remarks>
/// This code demonstrates various aspects of caching. It is not intended to be 
/// an example of a useful method.
/// </remarks>
private void CachePropertiesByActivate(AutomationElement elementList)
{
    AutomationElement elementListItem;

    // Set up the request.
    CacheRequest cacheRequest = new CacheRequest();
    cacheRequest.Add(AutomationElement.NameProperty);
    cacheRequest.Add(AutomationElement.IsEnabledProperty);
    cacheRequest.Add(SelectionItemPattern.Pattern);
    cacheRequest.Add(SelectionItemPattern.SelectionContainerProperty);

    // Obtain an element and cache the requested items.
    using (cacheRequest.Activate())
    {
        Condition cond = new PropertyCondition(AutomationElement.IsSelectionItemPatternAvailableProperty, true);
        elementListItem = elementList.FindFirst(TreeScope.Children, cond);
    }
    // The CacheRequest is now inactive.

    // Retrieve the cached property and pattern.
    SelectionItemPattern pattern;
    String itemName;
    try
    {
        itemName = elementListItem.Cached.Name;
        pattern = elementListItem.GetCachedPattern(SelectionItemPattern.Pattern) as SelectionItemPattern;
    }
    catch (InvalidOperationException)
    {
        Console.WriteLine("Object was not in cache.");
        return;
    }
    // Alternatively, you can use TryGetCachedPattern to retrieve the cached pattern.
    object cachedPattern;
    if (true == elementListItem.TryGetCachedPattern(SelectionItemPattern.Pattern, out cachedPattern))
    {
        pattern = cachedPattern as SelectionItemPattern;
    }

    // Specified pattern properties are also in the cache.
    AutomationElement parentList = pattern.Cached.SelectionContainer;

    // The following line will raise an exception, because the HelpText property was not cached.
    /*** String itemHelp = elementListItem.Cached.HelpText; ***/

    // Similarly, pattern properties that were not specified in the CacheRequest cannot be 
    // retrieved from the cache. This would raise an exception.
    /*** bool selected = pattern.Cached.IsSelected; ***/

    // This is still a valid call, even though the property is in the cache.
    // Of course, the cached value and the current value are not guaranteed to be the same.
    itemName = elementListItem.Current.Name;
}

В следующем примере показаны различные аспекты кэширования, использующие Push для активации CacheRequest. За исключением случаев вложенных запросов кэша предпочтительнее использовать Activate.

''' <summary>
''' Caches and retrieves properties for a list item by using CacheRequest.Push.
''' </summary>
''' <param name="elementList">Element from which to retrieve a child element.</param>
''' <remarks>
''' This code demonstrates various aspects of caching. It is not intended to be 
''' an example of a useful method.
''' </remarks>
Private Sub CachePropertiesByPush(ByVal elementList As AutomationElement)
    ' Set up the request.
    Dim cacheRequest As New CacheRequest()

    ' Do not get a full reference to the cached objects, only to their cached properties and patterns.
    cacheRequest.AutomationElementMode = AutomationElementMode.None

    ' Cache all elements, regardless of whether they are control or content elements.
    cacheRequest.TreeFilter = Automation.RawViewCondition

    ' Property and pattern to cache.
    cacheRequest.Add(AutomationElement.NameProperty)
    cacheRequest.Add(SelectionItemPattern.Pattern)

    ' Activate the request.
    cacheRequest.Push()

    ' Obtain an element and cache the requested items.
    Dim myCondition As New PropertyCondition(AutomationElement.IsSelectionItemPatternAvailableProperty, _
        True)
    Dim elementListItem As AutomationElement = elementList.FindFirst(TreeScope.Children, myCondition)

    ' At this point, you could call another method that creates a CacheRequest and calls Push/Pop.
    ' While that method was retrieving automation elements, the CacheRequest set in this method 
    ' would not be active. 
    ' Deactivate the request.
    cacheRequest.Pop()

    ' Retrieve the cached property and pattern.
    Dim itemName As String = elementListItem.Cached.Name
    Dim pattern As SelectionItemPattern = _
        DirectCast(elementListItem.GetCachedPattern(SelectionItemPattern.Pattern), SelectionItemPattern)

    ' The following is an alternative way of retrieving the Name property.
    itemName = CStr(elementListItem.GetCachedPropertyValue(AutomationElement.NameProperty))

    ' This is yet another way, which returns AutomationElement.NotSupported if the element does
    ' not supply a value. If the second parameter is false, a default name is returned.
    Dim objName As Object = elementListItem.GetCachedPropertyValue(AutomationElement.NameProperty, True)
    If objName Is AutomationElement.NotSupported Then
        itemName = "Unknown"
    Else
        itemName = CStr(objName)
    End If
    ' The following call raises an exception, because only the cached properties are available, 
    '  as specified by cacheRequest.AutomationElementMode. If AutomationElementMode had its
    '  default value (Full), this call would be valid.
    '** bool enabled = elementListItem.Current.IsEnabled; **

End Sub 'CachePropertiesByPush

/// <summary>
/// Caches and retrieves properties for a list item by using CacheRequest.Push.
/// </summary>
/// <param name="autoElement">Element from which to retrieve a child element.</param>
/// <remarks>
/// This code demonstrates various aspects of caching. It is not intended to be 
/// an example of a useful method.
/// </remarks>
private void CachePropertiesByPush(AutomationElement elementList)
{
    // Set up the request.
    CacheRequest cacheRequest = new CacheRequest();

    // Do not get a full reference to the cached objects, only to their cached properties and patterns.
    cacheRequest.AutomationElementMode = AutomationElementMode.None;

    // Cache all elements, regardless of whether they are control or content elements.
    cacheRequest.TreeFilter = Automation.RawViewCondition;

    // Property and pattern to cache.
    cacheRequest.Add(AutomationElement.NameProperty);
    cacheRequest.Add(SelectionItemPattern.Pattern);

    // Activate the request.
    cacheRequest.Push();

    // Obtain an element and cache the requested items.
    Condition cond = new PropertyCondition(AutomationElement.IsSelectionItemPatternAvailableProperty, true);
    AutomationElement elementListItem = elementList.FindFirst(TreeScope.Children, cond);

    // At this point, you could call another method that creates a CacheRequest and calls Push/Pop.
    // While that method was retrieving automation elements, the CacheRequest set in this method 
    // would not be active. 

    // Deactivate the request.
    cacheRequest.Pop();

    // Retrieve the cached property and pattern.
    String itemName = elementListItem.Cached.Name;
    SelectionItemPattern pattern = elementListItem.GetCachedPattern(SelectionItemPattern.Pattern) as SelectionItemPattern;

    // The following is an alternative way of retrieving the Name property.
    itemName = elementListItem.GetCachedPropertyValue(AutomationElement.NameProperty) as String;

    // This is yet another way, which returns AutomationElement.NotSupported if the element does
    // not supply a value. If the second parameter is false, a default name is returned.
    object objName = elementListItem.GetCachedPropertyValue(AutomationElement.NameProperty, true);
    if (objName == AutomationElement.NotSupported)
    {
        itemName = "Unknown";
    }
    else
    {
        itemName = objName as String;
    }

    // The following call raises an exception, because only the cached properties are available, 
    //  as specified by cacheRequest.AutomationElementMode. If AutomationElementMode had its
    //  default value (Full), this call would be valid.
    /*** bool enabled = elementListItem.Current.IsEnabled; ***/
}

См. также

Основные понятия

Кэширование в клиентах автоматизации пользовательского интерфейса