EN
Este conteúdo não está disponível em seu idioma, mas aqui está a versão em inglês.

USB 3.0 Insertion Test

This test verifies that a USB 3.0 device always connects on the SuperSpeed port and does not connect on the high speed port when upstream SuperSpeed termination is on. For more information on how devices connect, see section 2 of the USB 3.0 Specification.

Note  

This test doesn't apply to USB hubs. It will automatically pass if the device under test is a hub.

Test details

Associated requirements

Device.Connectivity.UsbDevices.SuperSpeedOnConnectViaUsb3Port

See the device hardware requirements.

Platforms

Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows Server 2012 (x64) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 Windows Server 2012 R2

Expected run time

~2 minutes

Categories

Certification

Type

Manual

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: USB Device.Connectivity Testing Prerequisites.

When prompted, unplug the device and plug it back into the same port. It is very important to plug the device into the same port as when you started the test.

Troubleshooting

For troubleshooting information, see Troubleshooting Device.Connectivity Testing.

More information

Command syntax

ParameterDescription

IsEmbeddedUSBDevice

String that indicates whether the device is an internal device.

TRUE: The device is an internal device

FALSE: The device is an external device. This is the default value.

 

 

 

Contribuições da comunidade

ADICIONAR
Mostrar:
© 2015 Microsoft