Share via

NDISTest 6.5 - WLanControlPathStress

  • Article

This test picks a random authentication and cipher pair from the list of supported ciphers and establishes a connection using it.

Test details

Associated requirements

Device.Network.WLAN.Base.ConformToNDIS Device.Network.WLAN.Base.MeetScanAndConnReq Device.Network.WLAN.Base.OnlyWDFOrNDIS630Calls Device.Network.WLAN.CSBBase.ConformToNDIS Device.Network.WLAN.CSBBase.MeetScanAndConnReq Device.Network.WLAN.CSBBase.OnlyWDFOrNDIS630Calls

See the device hardware requirements.

Platforms

Windows 7 (x64) Windows 7 (x86) Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86

Expected run time

~13 minutes

Categories

Certification Reliability

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.

The following suites are available in this test:

  • ControlPathStress_cmn

The ControlPathStress_cmn suite consists of the following:

Name Description

MiniTestConnectCipher

  • Connect the DUT to an access point using {0}/{1}.

  • Verify the connection by getting the association information.

MiniTestIBSSConnectCipher

  • Connect the DUT to the SUT in IBSS mode using {0}/{1}.

  • Verify the connection by getting the association information.

This test case is not applicable to devices that support InstantGo.

 

Troubleshooting

For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.

 

 

Send comments about this topic to Microsoft