WLAN D2 Sleep - Functional
This test validates the D2 sleep functionality. Device should enter the D2 state after pressing the power button for two minutes and then return to D0 after five minutes.
Test details
Associated requirements |
Device.Network.WLAN.Base.MeetScanAndConnReq Device.Network.WLAN.CSBBase.MeetScanAndConnReq Device.Network.WLAN.CSBNLO.SupportNetworkListOffload Device.Network.WLAN.NLO.SupportNetworkListOffload |
Platforms |
Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~12 minutes |
Categories |
Certification Functional |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.
Devices that support InstantGo will automatically pass the test.
Troubleshooting
For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.
More information
Command syntax
| Parameter | Description |
|---|---|
TestDeviceSupports5ghz |
If the device supports 5 GHz network, this will be set to true. Default value: True |
AP1IPAddress |
The IP address of the WAN port of the first physical access point. Default value: 192.168.2.2 |
AP1Password |
The root password for the first physical access point. Default value: password |
AP2IPAddress |
The IP address of the WAN port of the second physical access point. Default value: 192.168.2.3 |
AP2Password |
The root password for the second physical access point. Default value: password |