Ta zawartość nie jest dostępna w wymaganym języku. Wersja w języku angielskim znajduje się tutaj.

Uses and Stages of Bridges


Updated: November 27, 2015


Microsoft Azure BizTalk Services (MABS) is being retired, and replaced with Azure Logic Apps. If you currently use MABS, then Move from BizTalk Services to Logic Appsprovides some guidance on moving your integration solutions to Logic Apps.

If you're brand new to Logic Apps, then we suggest getting started here:

BizTalk Services provides two kinds of bridges – Pass-Through Bridge and XML bridge. XML bridges, in turn include XML One-Way Bridge and XML Request-Reply Bridge. This section provides information on the uses and stages of these bridges.

The XML bridge can be used to mediate and bridge mismatches between two or more disparate systems that communicate by exchanging XML messages. XML bridges, possibly in conjunction with other Service Bus entities in a message flow, provide a variety of mediation paradigms and scenarios, such as following:

  • Message Validation: The XML bridge supports validation of incoming XML messages against an XSD schema. Messages that fail validation are rejected.

  • Message Enrichment and Extraction: The XML bridge supports message enrichment through data lookup from other data sources. This is typically useful in scenarios where messages may require contextual data present beyond the message boundaries typically from a configuration store, an external service, or the likes.

    The XML bridge also enables you to extract properties from an XML message that can be used for routing eventually. For example, in a purchase order message, the Quantity element can be marked. The message can then be routed based on the value of quantity ordered.

  • Message Transformation: The XML bridge supports message body transformations from one XML structure to another. This capability of an XML bridge can also be used to ‘normalize’ a message in scenarios where multiple messages are mapped to a single message. For example, a bridge may need to accept purchase orders in different schemas from different clients but they are eventually transformed into a single purchase order schema required by the organization.

  • Location Virtualization: The XML bridge provides primitive location virtualization of backend services. Clients send messages to the XML bridge endpoint exposed on the cloud and not the actual service (which may be on the cloud or on premises). The bridge then routes the messages to the backend service based on routing rules.

  • Custom processing: The bridges provide the options of including custom code to incorporate processing tasks that are not included in the out-of-the-box bridge configuration.

This section provides information about the different stages of an XML bridge. Note that each stage is optional and can be turned on or off.

The first stage in the XML bridge is the Validate stage. This provides XSD validation of XML messages against specified schemas. The schemas to use for validation are specified during the configuration of the bridge. A single XML bridge can receive and process XML messages with different schemas. During the validate stage, depending on the incoming message, the corresponding schema is picked and used for validation. Once the message is validated against the schema, the Validate stage promotes the X_PIPELINE_MESSAGETYPE property on the message. The value of the property is a combination of target namespace for the schema and the root node name, for example, http://IntegrationServices.Schema#RootNode. If the message validation fails either because no matching schema was found or because of an ambiguous match (more than one schema matched), an exception is thrown.

For instructions on how to configure the validate stage, see Create an XML One-Way Bridge or Create an XML Request-Reply Bridge.

Within the Enrich stage you can enrich a message by creating properties, the values of which can be derived from the incoming message header, from a system-promoted property, from an element or attribute in the incoming message body, or through a lookup on an external data source such as Microsoft Azure SQL Database tables. These properties can then be used for routing messages to destination endpoints and protocol bridging.


While the information about the providers is stored in the LookupProviderConfigurations.xml, the information about which values to assign from header to message properties, what values to extract, and what values to lookup are stored in a bridge configuration file. When you build a BizTalk Service project, the LookupProviderConfigurations.xml also rolls up into a bridge configuration file. When you deploy the BizTalk Service project, it is this bridge configuration file that gets deployed to the Service Bus.

In the Enrich stage, you create properties and assign values to those properties. But the question that comes to mind is what can I do with these properties? How do these properties make my task easier? You can use the properties in two ways:

  • You can use the properties to set filter conditions to route messages to different destinations. For instructions on how to achieve this, see The Routing Condition.

  • You can use the properties to bridge protocol mismatch between the message sender and the message receiver. For example, you have an incoming SOAP message that has a custom header value. You want to pass on this value as the custom header of an HTTP message because the message receiver wants a REST message and does not understand a SOAP message format. You can use properties to do so. You can first assign the value from the incoming message header to a property, say P1, and then while sending the message to the receiver, assign the value of P1 to the message header of the outgoing message. For more information, see Route and Reply Actions: Bridging Protocol Mismatch .

Within a Bridge Configuration, the properties that you define as part of the Enrich stage are available throughout the flow of the message for each stage in Bridge Configuration. In other words, if you defined a property in the Enrich stage, you can use that property during the Transform stage as well as for any map operations. The properties defined in the Enrich stage can also be used outside the boundary of a Bridge Configuration, with some considerations. Before we go into the details of that, we must understand that the property values are stored as properties of the Service Bus BrokeredMessage class. Now that we are aware of this fact, let’s talk about the lifetime of the properties outside a Bridge Configuration.

  • Because only a Service Bus Queue or a Topic can consume messages of BrokeredMessage type, the properties and their values (as a key-value pair), can directly be consumed by Queues and Topics. After that, Topics for instance, can potentially use the properties for further processing and routing

  • You cannot pass on the properties and their values to other Bridge Configuration components like One-Way/Two-Way Relay Endpoints or One-Way/Two-Way External Service Endpoints. If you do want to pass the property values to these entities, you must assign the property values to the headers of the outgoing message. For more information, see Route and Reply Actions: Bridging Protocol Mismatch.

  • In a “chaining” scenario where the message from one bridge is routed to another bridge and then finally to a Service Bus Queue (for example), only the properties from the last bridge in the chain are available for any further routing or processing. Also, to pass property values to the subsequent bridges, property values must be assigned to the headers of the outgoing message. These properties must then be extracted in the second bridge.

The Transform stage, as the name suggests, provides the capability to perform structural transformations on the messages. Like the other stages in the pipeline, the Transform stage can work with multiple message-types, so you can have more than one transform available as part of the transform stage. The right transform to be performed is automatically looked up at runtime based on the incoming message type, provided the corresponding transforms have been configured and uploaded while configuring the bridge. The transform resolution happens based on the message type of the incoming message.

  • The Transform stage matches the message type of the message with the message type of the source schema in a map.

  • If the validation stage is turned off, the transform stage matches the incoming message with the source message schema. If the resolution happens, it then promotes the MessageType property on the message.

The current release only supports single source to single destination transforms. For more information, see Learn and create Message Maps and Transforms. For instructions on how to configure the Transform stage, see Configure the Transform stage or Configure the Transform stage for the Request message.

The Enrich stage, post transform, is similar to the Enrich stage before transform. The only difference is that in the post-transform Enrich stage, you can enrich the transformed message. The way you configure the Enrich stage remains the same as pre-transform Enrich stage. For instructions on how to configure the Enrich stage, post transform see Configure the Enrich Stage (post- Transform) or Configure the Enrich Stage (post- Transform) for the Request message.


All the properties extracted or looked up before the transform stages are also available on the transformed message. A previously extracted or enriched property will be overwritten if it is modified in the post-transform enrich stage.

In the previous section we saw that in the Validate stage, the validation happens against schemas and in the Transform stage, the message is transformed using a transform. So, the artifacts those are available as part of an XML bridge are:

  • Schemas. These have .XSD extension

  • Transforms. These have .TRFM extension and there can be multiple transforms within a Transform stage.

  • Assemblies. These include the custom-processing logic that can be incorporated at specific stages of the bridge.

  • Certificates. These are used for secure message transfer.


A bridge configuration file is not an artifact because it cannot be shared between different bridges. A bridge configuration file is specific to a bridge.

The BizTalk Service application can have multiple bridges and each bridge can be using multiple transforms and schemas. So, a typical BizTalk Services application would have a large number of transforms and schemas. However, at the same time, every transform and schema might not be required for each XML bridge. Hence, there must be a way to associate the transforms and schemas to a bridge. You can do this association while configuring the bridge.

To associate schemas and transforms, see Create an XML One-Way Bridge or Create an XML Request-Reply Bridge.

A Pass-Through Bridge is used when you want any message type to be processed by the bridge. As a result, a Pass-Through Bridge does not include validate or transform stages because both these stages are tied to message types. A Pass-Through Bridge only includes the Enrich stage, which is used for the same purposes as in an XML bridge. For more information on how to configure a Pass-Through Bridge, see Create a Pass-Through Bridge.