Udostępnij za pośrednictwem


DisplayMode Wyliczenie

Definicja

Definiuje identyfikatory wskazujące tryby wyświetlania używane przez ByteViewerprogram .

public enum class DisplayMode
public enum DisplayMode
type DisplayMode = 
Public Enum DisplayMode
Dziedziczenie
DisplayMode

Pola

Ansi 2

Wyświetlanie formatu ANSI.

Auto 4

Tryb wyświetlania, który automatycznie wybiera tryb wyświetlania. W tym trybie bajty są badane w celu ustalenia, czy są one szesnastkowe lub drukowalne. Jeśli bajty są w formacie szesnastkowym, Hexdump zostanie wybrany tryb. Jeśli znaki pasują do zestawu znaków drukowalnych, zostanie uruchomiony test, aby automatycznie wybrać tryb wyświetlania Ansi lub Unicode .

Hexdump 1

Wyświetlacz formatu szesnastkowego.

Unicode 3

Wyświetlanie formatu Unicode.

Przykłady

W poniższym przykładzie pokazano, jak używać DisplayMode identyfikatorów. Ten przykład kodu jest częścią większego przykładu udostępnionego ByteViewer dla klasy .

#using <System.Windows.Forms.dll>
#using <System.dll>
#using <System.Drawing.dll>
#using <System.Design.dll>

using namespace System;
using namespace System::Drawing;
using namespace System::Collections;
using namespace System::ComponentModel;
using namespace System::ComponentModel::Design;
using namespace System::Windows::Forms;

public ref class ByteViewerForm: public System::Windows::Forms::Form
{
private:
   System::Windows::Forms::Button^ button1;
   System::Windows::Forms::Button^ button2;
   System::ComponentModel::Design::ByteViewer^ byteviewer;

public:
   ByteViewerForm()
   {
      // Initialize the controls other than the ByteViewer.
      InitializeForm();
      
      // Initialize the ByteViewer.
      byteviewer = gcnew ByteViewer;
      byteviewer->Location = Point(8,46);
      byteviewer->Size = System::Drawing::Size( 600, 338 );
      byteviewer->Anchor = static_cast<AnchorStyles>(AnchorStyles::Left | AnchorStyles::Bottom | AnchorStyles::Top);
      byteviewer->SetBytes( (array<Byte>^)Array::CreateInstance( Byte::typeid, 0 ) );
      this->Controls->Add( byteviewer );
   }

private:

   // Show a file selection dialog and cues the byte viewer to 
   // load the data in a selected file.
   void loadBytesFromFile( Object^ /*sender*/, EventArgs^ /*e*/ )
   {
      OpenFileDialog^ ofd = gcnew OpenFileDialog;
      if ( ofd->ShowDialog() != ::DialogResult::OK )
            return;

      byteviewer->SetFile( ofd->FileName );
   }

   // Clear the bytes in the byte viewer.
   void clearBytes( Object^ /*sender*/, EventArgs^ /*e*/ )
   {
      byteviewer->SetBytes( (array<Byte>^)Array::CreateInstance( Byte::typeid, 0 ) );
   }

   // Changes the display mode of the byte viewer according to the 
   // Text property of the RadioButton sender control.
   void changeByteMode( Object^ sender, EventArgs^ /*e*/ )
   {
      System::Windows::Forms::RadioButton^ rbutton = dynamic_cast<System::Windows::Forms::RadioButton^>(sender);
      DisplayMode mode;
      if ( rbutton->Text->Equals( "ANSI" ) )
      {
         mode = DisplayMode::Ansi;
      }
      else
      if ( rbutton->Text->Equals( "Hex" ) )
      {
         mode = DisplayMode::Hexdump;
      }
      else
      if ( rbutton->Text->Equals( "Unicode" ) )
      {
         mode = DisplayMode::Unicode;
      }
      else
      {
         mode = DisplayMode::Auto;
      }

      // Sets the display mode.
      byteviewer->SetDisplayMode( mode );
   }

   void InitializeForm()
   {
      this->SuspendLayout();
      this->ClientSize = System::Drawing::Size( 680, 440 );
      this->MinimumSize = System::Drawing::Size( 660, 400 );
      this->Size = System::Drawing::Size( 680, 440 );
      this->Name = "Byte Viewer Form";
      this->Text = "Byte Viewer Form";
      this->button1 = gcnew System::Windows::Forms::Button;
      this->button1->Location = System::Drawing::Point( 8, 8 );
      this->button1->Size = System::Drawing::Size( 190, 23 );
      this->button1->Name = "button1";
      this->button1->Text = "Set Bytes From File...";
      this->button1->TabIndex = 0;
      this->button1->Click += gcnew EventHandler( this, &ByteViewerForm::loadBytesFromFile );
      this->Controls->Add( this->button1 );
      this->button2 = gcnew System::Windows::Forms::Button;
      this->button2->Location = System::Drawing::Point( 198, 8 );
      this->button2->Size = System::Drawing::Size( 190, 23 );
      this->button2->Name = "button2";
      this->button2->Text = "Clear Bytes";
      this->button2->Click += gcnew EventHandler( this, &ByteViewerForm::clearBytes );
      this->button2->TabIndex = 1;
      this->Controls->Add( this->button2 );
      System::Windows::Forms::GroupBox^ group = gcnew System::Windows::Forms::GroupBox;
      group->Location = Point(418,3);
      group->Size = System::Drawing::Size( 220, 36 );
      group->Text = "Display Mode";
      this->Controls->Add( group );
      System::Windows::Forms::RadioButton^ rbutton1 = gcnew System::Windows::Forms::RadioButton;
      rbutton1->Location = Point(6,15);
      rbutton1->Size = System::Drawing::Size( 46, 16 );
      rbutton1->Text = "Auto";
      rbutton1->Checked = true;
      rbutton1->Click += gcnew EventHandler( this, &ByteViewerForm::changeByteMode );
      group->Controls->Add( rbutton1 );
      System::Windows::Forms::RadioButton^ rbutton2 = gcnew System::Windows::Forms::RadioButton;
      rbutton2->Location = Point(54,15);
      rbutton2->Size = System::Drawing::Size( 50, 16 );
      rbutton2->Text = "ANSI";
      rbutton2->Click += gcnew EventHandler( this, &ByteViewerForm::changeByteMode );
      group->Controls->Add( rbutton2 );
      System::Windows::Forms::RadioButton^ rbutton3 = gcnew System::Windows::Forms::RadioButton;
      rbutton3->Location = Point(106,15);
      rbutton3->Size = System::Drawing::Size( 46, 16 );
      rbutton3->Text = "Hex";
      rbutton3->Click += gcnew EventHandler( this, &ByteViewerForm::changeByteMode );
      group->Controls->Add( rbutton3 );
      System::Windows::Forms::RadioButton^ rbutton4 = gcnew System::Windows::Forms::RadioButton;
      rbutton4->Location = Point(152,15);
      rbutton4->Size = System::Drawing::Size( 64, 16 );
      rbutton4->Text = "Unicode";
      rbutton4->Click += gcnew EventHandler( this, &ByteViewerForm::changeByteMode );
      group->Controls->Add( rbutton4 );
      this->ResumeLayout( false );
   }
};

[STAThread]
int main()
{
   Application::Run( gcnew ByteViewerForm );
}
using System;
using System.Drawing;
using System.Collections;
using System.ComponentModel;
using System.ComponentModel.Design;
using System.Windows.Forms;

namespace ByteViewerForm
{
    public class ByteViewerForm : System.Windows.Forms.Form
    {
        private System.Windows.Forms.Button button1;
        private System.Windows.Forms.Button button2;
        private System.ComponentModel.Design.ByteViewer byteviewer;

        public ByteViewerForm()
        {
            // Initialize the controls other than the ByteViewer.
            InitializeForm();

            // Initialize the ByteViewer.
            byteviewer = new ByteViewer();
            byteviewer.Location = new Point( 8, 46 );
            byteviewer.Size = new Size( 600, 338 );
            byteviewer.Anchor = AnchorStyles.Left | AnchorStyles.Bottom | AnchorStyles.Top;
            byteviewer.SetBytes( new byte[] { } );
            this.Controls.Add( byteviewer );
        }

        // Show a file selection dialog and cues the byte viewer to
        // load the data in a selected file.
        private void loadBytesFromFile(object sender, EventArgs e)
        {
            OpenFileDialog ofd = new OpenFileDialog();
            if( ofd.ShowDialog() != DialogResult.OK )
                return;

            byteviewer.SetFile(ofd.FileName);
        }

        // Clear the bytes in the byte viewer.
        private void clearBytes(object sender, EventArgs e)
        {
            byteviewer.SetBytes( new byte[] { } );
        }

        // Changes the display mode of the byte viewer according to the
        // Text property of the RadioButton sender control.
        private void changeByteMode(object sender, EventArgs e)
        {
            System.Windows.Forms.RadioButton rbutton =
                (System.Windows.Forms.RadioButton)sender;

            DisplayMode mode;
            switch( rbutton.Text )
            {
                case "ANSI":
                    mode = DisplayMode.Ansi;
                    break;
                case "Hex":
                    mode = DisplayMode.Hexdump;
                    break;
                case "Unicode":
                    mode = DisplayMode.Unicode;
                    break;
                default:
                    mode = DisplayMode.Auto;
                    break;
            }

            // Sets the display mode.
            byteviewer.SetDisplayMode( mode );
        }

        private void InitializeForm()
        {
            this.SuspendLayout();
            this.ClientSize = new System.Drawing.Size(680, 440);
            this.MinimumSize = new System.Drawing.Size(660, 400);
            this.Size = new System.Drawing.Size(680, 440);
            this.Name = "Byte Viewer Form";
            this.Text = "Byte Viewer Form";

            this.button1 = new System.Windows.Forms.Button();
            this.button1.Location = new System.Drawing.Point(8, 8);
            this.button1.Size = new System.Drawing.Size(190, 23);
            this.button1.Name = "button1";
            this.button1.Text = "Set Bytes From File...";
            this.button1.TabIndex = 0;
            this.button1.Click += new EventHandler(this.loadBytesFromFile);
            this.Controls.Add(this.button1);

            this.button2 = new System.Windows.Forms.Button();
            this.button2.Location = new System.Drawing.Point(198, 8);
            this.button2.Size = new System.Drawing.Size(190, 23);
            this.button2.Name = "button2";
            this.button2.Text = "Clear Bytes";
            this.button2.Click += new EventHandler(this.clearBytes);
            this.button2.TabIndex = 1;

            this.Controls.Add(this.button2);

            System.Windows.Forms.GroupBox group = new System.Windows.Forms.GroupBox();
            group.Location = new Point(418, 3);
            group.Size = new Size(220, 36);
            group.Text = "Display Mode";
            this.Controls.Add( group );

            System.Windows.Forms.RadioButton rbutton1 = new System.Windows.Forms.RadioButton();
            rbutton1.Location = new Point(6, 15);
            rbutton1.Size = new Size(46, 16);
            rbutton1.Text = "Auto";
            rbutton1.Checked = true;
            rbutton1.Click += new EventHandler(this.changeByteMode);
            group.Controls.Add( rbutton1 );

            System.Windows.Forms.RadioButton rbutton2 = new System.Windows.Forms.RadioButton();
            rbutton2.Location = new Point(54, 15);
            rbutton2.Size = new Size(50, 16);
            rbutton2.Text = "ANSI";
            rbutton2.Click += new EventHandler(this.changeByteMode);
            group.Controls.Add( rbutton2 );

            System.Windows.Forms.RadioButton rbutton3 = new System.Windows.Forms.RadioButton();
            rbutton3.Location = new Point(106, 15);
            rbutton3.Size = new Size(46, 16);
            rbutton3.Text = "Hex";
            rbutton3.Click += new EventHandler(this.changeByteMode);
            group.Controls.Add( rbutton3 );

            System.Windows.Forms.RadioButton rbutton4 = new System.Windows.Forms.RadioButton();
            rbutton4.Location = new Point(152, 15);
            rbutton4.Size = new Size(64, 16);
            rbutton4.Text = "Unicode";
            rbutton4.Click += new EventHandler(this.changeByteMode);
            group.Controls.Add( rbutton4 );
            this.ResumeLayout(false);
        }

        [STAThread]
        static void Main()
        {
            Application.Run(new ByteViewerForm());
        }
    }
}
Imports System.Drawing
Imports System.Collections
Imports System.ComponentModel
Imports System.ComponentModel.Design
Imports System.Windows.Forms

Public Class ByteViewerForm
   Inherits System.Windows.Forms.Form
   Private button1 As System.Windows.Forms.Button
   Private button2 As System.Windows.Forms.Button
   Private byteviewer As System.ComponentModel.Design.ByteViewer
   
    Public Sub New()
        ' Initialize the controls other than the ByteViewer.
        InitializeForm()

        ' Initialize the ByteViewer.
        byteviewer = New ByteViewer
        byteviewer.Location = New Point(8, 46)
        byteviewer.Size = New Size(600, 338)
        byteviewer.Anchor = AnchorStyles.Left Or AnchorStyles.Bottom Or AnchorStyles.Top
        byteviewer.SetBytes(New Byte() {})
        Me.Controls.Add(byteviewer)
    End Sub

    ' Show a file selection dialog and cues the byte viewer to 
    ' load the data in a selected file.
    Private Sub loadBytesFromFile(ByVal sender As Object, ByVal e As EventArgs)
        Dim ofd As New OpenFileDialog
        If ofd.ShowDialog() <> System.Windows.Forms.DialogResult.OK Then
            Return
        End If
        byteviewer.SetFile(ofd.FileName)
    End Sub

    ' Clear the bytes in the byte viewer.
    Private Sub clearBytes(ByVal sender As Object, ByVal e As EventArgs)
        byteviewer.SetBytes(New Byte() {})
    End Sub

    ' Changes the display mode of the byte viewer according to the 
    ' Text property of the RadioButton sender control.
    Private Sub changeByteMode(ByVal sender As Object, ByVal e As EventArgs)
        Dim rbutton As System.Windows.Forms.RadioButton = _
            CType(sender, System.Windows.Forms.RadioButton)

        Dim mode As DisplayMode
        Select Case rbutton.Text
            Case "ANSI"
                mode = DisplayMode.Ansi
            Case "Hex"
                mode = DisplayMode.Hexdump
            Case "Unicode"
                mode = DisplayMode.Unicode
            Case Else
                mode = DisplayMode.Auto
        End Select

        ' Sets the display mode.
        byteviewer.SetDisplayMode(mode)
    End Sub

    Private Sub InitializeForm()
        Me.SuspendLayout()
        Me.ClientSize = New System.Drawing.Size(680, 440)
        Me.MinimumSize = New System.Drawing.Size(660, 400)
        Me.Size = New System.Drawing.Size(680, 440)
        Me.Name = "Byte Viewer Form"
        Me.Text = "Byte Viewer Form"

        Me.button1 = New System.Windows.Forms.Button
        Me.button1.Location = New System.Drawing.Point(8, 8)
        Me.button1.Size = New System.Drawing.Size(190, 23)
        Me.button1.Name = "button1"
        Me.button1.Text = "Set Bytes From File..."
        Me.button1.TabIndex = 0
        AddHandler Me.button1.Click, AddressOf Me.loadBytesFromFile
        Me.Controls.Add(Me.button1)

        Me.button2 = New System.Windows.Forms.Button
        Me.button2.Location = New System.Drawing.Point(198, 8)
        Me.button2.Size = New System.Drawing.Size(190, 23)
        Me.button2.Name = "button2"
        Me.button2.Text = "Clear Bytes"
        AddHandler Me.button2.Click, AddressOf Me.clearBytes
        Me.button2.TabIndex = 1

        Me.Controls.Add(Me.button2)

        Dim group As New System.Windows.Forms.GroupBox
        group.Location = New Point(418, 3)
        group.Size = New Size(220, 36)
        group.Text = "Display Mode"
        Me.Controls.Add(group)

        Dim rbutton1 As New System.Windows.Forms.RadioButton
        rbutton1.Location = New Point(6, 15)
        rbutton1.Size = New Size(46, 16)
        rbutton1.Text = "Auto"
        rbutton1.Checked = True
        AddHandler rbutton1.Click, AddressOf Me.changeByteMode
        group.Controls.Add(rbutton1)

        Dim rbutton2 As New System.Windows.Forms.RadioButton
        rbutton2.Location = New Point(54, 15)
        rbutton2.Size = New Size(50, 16)
        rbutton2.Text = "ANSI"
        AddHandler rbutton2.Click, AddressOf Me.changeByteMode
        group.Controls.Add(rbutton2)

        Dim rbutton3 As New System.Windows.Forms.RadioButton
        rbutton3.Location = New Point(106, 15)
        rbutton3.Size = New Size(46, 16)
        rbutton3.Text = "Hex"
        AddHandler rbutton3.Click, AddressOf Me.changeByteMode
        group.Controls.Add(rbutton3)

        Dim rbutton4 As New System.Windows.Forms.RadioButton
        rbutton4.Location = New Point(152, 15)
        rbutton4.Size = New Size(64, 16)
        rbutton4.Text = "Unicode"
        AddHandler rbutton4.Click, AddressOf Me.changeByteMode
        group.Controls.Add(rbutton4)
        Me.ResumeLayout(False)
    End Sub

    <STAThread()> _
    Shared Sub Main()
        Application.Run(New ByteViewerForm)
    End Sub
End Class

Uwagi

Identyfikatory DisplayMode służą do wskazywania trybu wyświetlania używanego do wyświetlania każdej sekwencji bajtów.

Dotyczy

Zobacz też