windot11.h header
This header is used by network. For more information, see:
windot11.h contains the following programming interfaces:
Structures
| DOT11_ADDITIONAL_IE The DOT11_ADDITIONAL_IE structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_ASSOCIATION_COMPLETION_PARAMETERS The DOT11_ASSOCIATION_COMPLETION_PARAMETERS structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_ASSOCIATION_PARAMS The DOT11_ASSOCIATION_PARAMS structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_AUTH_CIPHER_PAIR_LIST The DOT11_AUTH_CIPHER_PAIR_LIST structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_AVAILABLE_CHANNEL_LIST The DOT11_AVAILABLE_CHANNEL_LIST structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_AVAILABLE_FREQUENCY_LIST The DOT11_AVAILABLE_FREQUENCY_LIST structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_BSS_ENTRY The DOT11_BSS_ENTRY structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_BSS_ENTRY_PHY_SPECIFIC_INFO The DOT11_BSS_ENTRY_PHY_SPECIFIC_INFO structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_BYTE_ARRAY The DOT11_BYTE_ARRAY structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_CAN_SUSTAIN_AP_PARAMETERS The DOT11_CAN_SUSTAIN_AP_PARAMETERS structure specifies the reason why the NIC can sustain an access point (AP). |
| DOT11_CHANNEL_HINT The DOT11_CHANNEL_HINT structure describes suggested channel numbers for an NLO operation. |
| DOT11_CIPHER_ALGORITHM_LIST The DOT11_CIPHER_ALGORITHM_LIST structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_CIPHER_DEFAULT_KEY_VALUE The DOT11_CIPHER_DEFAULT_KEY_VALUE structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_CIPHER_KEY_MAPPING_KEY_VALUE The DOT11_CIPHER_KEY_MAPPING_KEY_VALUE structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_CURRENT_OPERATION_MODE The DOT11_CURRENT_OPERATION_MODE structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_DATA_RATE_MAPPING_ENTRY The DOT11_DATA_RATE_MAPPING_ENTRY structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_DISASSOCIATE_PEER_REQUEST The DOT11_DISASSOCIATE_PEER_REQUEST structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_DISASSOCIATION_PARAMETERS The DOT11_DISASSOCIATION_PARAMETERS structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_ENCAP_ENTRY The DOT11_ENCAP_ENTRY structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_ERP_PHY_ATTRIBUTES The DOT11_ERP_PHY_ATTRIBUTES structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_EXTAP_ATTRIBUTES The DOT11_EXTAP_ATTRIBUTES structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_EXTSTA_ATTRIBUTES The DOT11_EXTSTA_ATTRIBUTES structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_EXTSTA_RECV_CONTEXT The DOT11_EXTSTA_RECV_CONTEXT structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_EXTSTA_SEND_CONTEXT The DOT11_EXTSTA_SEND_CONTEXT structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_GO_NEGOTIATION_CONFIRMATION_SEND_COMPLETE_PARAMETERS The completion parameters for a Group Owner (GO) negotiation confirmation are specified in a DOT11_GO_NEGOTIATION_CONFIRMATION_SEND_COMPLETE_PARAMETERS structure. |
| DOT11_GO_NEGOTIATION_REQUEST_SEND_COMPLETE_PARAMETERS The completion parameters for a Group Owner (GO) negotiation request are specified in a DOT11_GO_NEGOTIATION_REQUEST_SEND_COMPLETE_PARAMETERS structure. |
| DOT11_GO_NEGOTIATION_RESPONSE_SEND_COMPLETE_PARAMETERS The completion parameters for a Group Owner (GO) negotiation response are specified in a DOT11_GO_NEGOTIATION_RESPONSE_SEND_COMPLETE_PARAMETERS structure. |
| DOT11_HRDSSS_PHY_ATTRIBUTES The DOT11_HRDSSS_PHY_ATTRIBUTES structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_INCOMING_ASSOC_COMPLETION_PARAMETERS The DOT11_INCOMING_ASSOC_COMPLETION_PARAMETERS structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_INCOMING_ASSOC_DECISION The DOT11_INCOMING_ASSOC_DECISION structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_INCOMING_ASSOC_DECISION_V2 Information for an incoming association request is included in a DOT11_INCOMING_ASSOC_DECISION_V2 structure. This structure is sent with an OID_DOT11_INCOMING_ASSOCIATION_DECISION request. |
| DOT11_INCOMING_ASSOC_REQUEST_RECEIVED_PARAMETERS The DOT11_INCOMING_ASSOC_REQUEST_RECEIVED_PARAMETERS structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_INCOMING_ASSOC_STARTED_PARAMETERS The DOT11_INCOMING_ASSOC_STARTED_PARAMETERS structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_INVITATION_REQUEST_SEND_COMPLETE_PARAMETERS The completion parameters for a sent invitation request are specified in a DOT11_INVITATION_REQUEST_SEND_COMPLETE_PARAMETERS structure. This structure is sent with an NDIS_STATUS_DOT11_WFD_INVITATION_REQUEST_SEND_COMPLETE request to the miniport. |
| DOT11_INVITATION_RESPONSE_SEND_COMPLETE_PARAMETERS The parameters for an invitation response send completion are specified in a DOT11_INVITATION_RESPONSE_SEND_COMPLETE_PARAMETERS structure. This structure is sent with an NDIS_STATUS_DOT11_WFD_INVITATION_RESPONSE_SEND_COMPLETE indication. |
| DOT11_KEY_ALGO_BIP The DOT11_KEY_ALGO_BIP structure defines a cipher key that is used by the Broadcast Integrity Protocol (BIP) algorithm for management frame integrity protection. |
| DOT11_KEY_ALGO_CCMP The DOT11_KEY_ALGO_CCMP structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_KEY_ALGO_TKIP_MIC The DOT11_KEY_ALGO_TKIP_MIC structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_MAC_ADDRESS The DOT11_MAC_ADDRESS structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_MAC_FRAME_STATISTICS The DOT11_MAC_FRAME_STATISTICS structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_MAC_INFO The DOT11_MAC_INFO structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_MAC_PARAMETERS The DOT11_MAC_PARAMETERS is the optional input for an OID_DOT11_CREATE_MAC request. The device role is defined in an operation mode bitmask included in this structure. |
| DOT11_OFDM_PHY_ATTRIBUTES The DOT11_OFDM_PHY_ATTRIBUTES structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_OFFLOAD_NETWORK The DOT11_OFFLOAD_NETWORK structure describes a network list offload. |
| DOT11_OFFLOAD_NETWORK_LIST_INFO The DOT11_OFFLOAD_NETWORK_LIST_INFO structure describes a network offload-list (NLO). |
| DOT11_OFFLOAD_NETWORK_STATUS_PARAMETERS The DOT11_OFFLOAD_NETWORK_STATUS_PARAMETERS structure indicates the success of the discovery of networks in the offload list. |
| DOT11_PEER_INFO The DOT11_PEER_INFO structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_PEER_INFO_LIST The DOT11_PEER_INFO_LIST structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_PEER_STATISTICS The DOT11_PEER_STATISTICS structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_PHY_ATTRIBUTES The DOT11_PHY_ATTRIBUTES structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_PHY_FRAME_STATISTICS The DOT11_PHY_FRAME_STATISTICS structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_PHY_FREQUENCY_ADOPTED_PARAMETERS The DOT11_PHY_FREQUENCY_ADOPTED_PARAMETERS structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_PHY_ID_LIST The DOT11_PHY_ID_LIST structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_PHY_TYPE_INFO The DOT11_PHY_TYPE_INFO structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_POWER_MGMT_AUTO_MODE_ENABLED_INFO The DOT11_POWER_MGMT_AUTO_MODE_ENABLED structure describes to a device whether to automatically manage its power saving mode. |
| DOT11_POWER_MGMT_MODE_STATUS_INFO The DOT11_POWER_MGMT_MODE_STATUS_INFO structure describes the power mode of the hardware. |
| DOT11_PRIVACY_EXEMPTION The DOT11_PRIVACY_EXEMPTION structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_PROVISION_DISCOVERY_REQUEST_SEND_COMPLETE_PARAMETERS The parameters for a provision discovery request send complete are specified in a DOT11_PROVISION_DISCOVERY_REQUEST_SEND_COMPLETE_PARAMETERS structure. |
| DOT11_PROVISION_DISCOVERY_RESPONSE_SEND_COMPLETE_PARAMETERS The parameters for a provision discovery response are specified in a DOT11_PROVISION_DISCOVERY_RESPONSE_SEND_COMPLETE_PARAMETERS structure. This structure is sent with an NDIS_STATUS_DOT11_WFD_PROVISION_DISCOVERY_RESPONSE_SEND_COMPLETE indication. |
| DOT11_RATE_SET The DOT11_RATE_SET structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_RECEIVED_GO_NEGOTIATION_CONFIRMATION_PARAMETERS The parameters for a received Group Owner (GO) negotiation confirmation are specified in a DOT11_RECEIVED_GO_NEGOTIATION_CONFIRMATION_PARAMETERS structure. |
| DOT11_RECEIVED_GO_NEGOTIATION_REQUEST_PARAMETERS The parameters for a received Group Owner (GO) negotiation request are specified in a DOT11_RECEIVED_GO_NEGOTIATION_REQUEST_PARAMETERS structure. This structure is sent with an NDIS_STATUS_DOT11_WFD_RECEIVED_GO_NEGOTIATION_REQUEST indication. |
| DOT11_RECEIVED_GO_NEGOTIATION_RESPONSE_PARAMETERS The parameters for a received Group Owner (GO) negotiation response are specified in a DOT11_RECEIVED_GO_NEGOTIATION_RESPONSE_PARAMETERS structure. This structure is sent with an NDIS_STATUS_DOT11_WFD_RECEIVED_GO_NEGOTIATION_RESPONSE indication. |
| DOT11_RECEIVED_INVITATION_REQUEST_PARAMETERS The parameters for a received invitation response are specified in a DOT11_RECEIVED_INVITATION_REQUEST_PARAMETERS structure. This structure is sent with an NDIS_STATUS_DOT11_WFD_RECEIVED_INVITATION_REQUEST indication. |
| DOT11_RECEIVED_INVITATION_RESPONSE_PARAMETERS The parameters for a received invitation response are specified in a DOT11_RECEIVED_INVITATION_RESPONSE_PARAMETERS structure. This structure is sent with an NDIS_STATUS_DOT11_WFD_RECEIVED_INVITATION_RESPONSE indication. |
| DOT11_RECEIVED_PROVISION_DISCOVERY_REQUEST_PARAMETERS The parameters for a provision discovery request are specified in a DOT11_RECEIVED_PROVISION_DISCOVERY_REQUEST_PARAMETERS structure. This structure is sent with an NDIS_STATUS_DOT11_WFD_RECEIVED_PROVISION_DISCOVERY_REQUEST indication. |
| DOT11_RECEIVED_PROVISION_DISCOVERY_RESPONSE_PARAMETERS The response parameters for a provision discovery response are specified in a DOT11_RECEIVED_PROVISION_DISCOVERY_RESPONSE_PARAMETERS structure. This structure is sent with an OID_DOT11_WFD_SEND_PROVISION_DISCOVERY_RESPONSE request to the miniport. |
| DOT11_ROAMING_COMPLETION_PARAMETERS The DOT11_ROAMING_COMPLETION_PARAMETERS structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_ROAMING_START_PARAMETERS The DOT11_ROAMING_START_PARAMETERS structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_SCAN_REQUEST_V2 The DOT11_SCAN_REQUEST_V2 structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_SEND_GO_NEGOTIATION_CONFIRMATION_PARAMETERS The confirmation parameters for a Group Owner (GO) negotiation response indication are specified in a DOT11_SEND_GO_NEGOTIATION_CONFIRMATION_PARAMETERS structure. |
| DOT11_SEND_GO_NEGOTIATION_RESPONSE_PARAMETERS The parameters for a response to a Group Owner (GO) negotiation request are specified in a DOT11_SEND_GO_NEGOTIATION_RESPONSE_PARAMETERS structure. This structure is sent with an OID_DOT11_WFD_SEND_INVITATION_RESPONSE request to the miniport. |
| DOT11_SEND_INVITATION_REQUEST_PARAMETERS The request parameters for an invitation request are specified in a DOT11_SEND_INVITATION_REQUEST_PARAMETERS structure. This structure is sent with an OID_DOT11_WFD_SEND_INVITATION_REQUEST request to the miniport. |
| DOT11_SEND_INVITATION_RESPONSE_PARAMETERS The parameters for a response to an invitation request are specified in a DOT11_SEND_INVITATION_RESPONSE_PARAMETERS structure. This structure is sent with an OID_DOT11_WFD_SEND_INVITATION_RESPONSE request to the miniport. |
| DOT11_SEND_PROVISION_DISCOVERY_REQUEST_PARAMETERS The request parameters for a provision discovery request are specified in a DOT11_SEND_PROVISION_DISCOVERY_REQUEST_PARAMETERS structure. This structure is sent with an OID_DOT11_WFD_SEND_PROVISION_DISCOVERY_REQUEST request to the miniport. |
| DOT11_SEND_PROVISION_DISCOVERY_RESPONSE_PARAMETERS The parameters for a response to a provision discovery request are specified in a DOT11_SEND_PROVISION_DISCOVERY_RESPONSE_PARAMETERS structure. This structure is sent with an OID_DOT11_WFD_SEND_PROVISION_DISCOVERY_RESPONSE request to the miniport. |
| DOT11_STATISTICS The DOT11_STATISTICS structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_STATUS_INDICATION The DOT11_STATUS_INDICATION structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_STOP_AP_PARAMETERS The DOT11_STOP_AP_PARAMETERS structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_SUPPORTED_ANTENNA The DOT11_SUPPORTED_ANTENNA structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_SUPPORTED_ANTENNA_LIST The DOT11_SUPPORTED_ANTENNA_LIST structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_SUPPORTED_DATA_RATES_VALUE_V2 The DOT11_SUPPORTED_DATA_RATES_VALUE_V2 structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_SUPPORTED_DSSS_CHANNEL The DOT11_SUPPORTED_DSSS_CHANNEL structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_SUPPORTED_DSSS_CHANNEL_LIST The DOT11_SUPPORTED_DSSS_CHANNEL_LIST structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_SUPPORTED_OFDM_FREQUENCY The DOT11_SUPPORTED_OFDM_FREQUENCY structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_SUPPORTED_OFDM_FREQUENCY_LIST The DOT11_SUPPORTED_OFDM_FREQUENCY_LIST structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_VWIFI_ATTRIBUTES The DOT11_VWIFI_ATTRIBUTES structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_VWIFI_COMBINATION The DOT11_VWIFI_COMBINATION structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_VWIFI_COMBINATION_V2 The DOT11_VWIFI_COMBINATION_V2 structure is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_VWIFI_COMBINATION_V3 The DOT11_VWIFI_COMBINATION_V3 structure contains the combination of MAC entities that an 802.11 wireless miniport driver simultaneously supports when virtualized. |
| DOT11_WFD_ADDITIONAL_IE The DOT11_WFD_ADDITIONAL_IE structure represents an additional Information Element (IE) included in an OID_DOT11_WFD_ADDITIONAL_IE request. An additional IE contains both request and response data for probe and beacon operations. |
| DOT11_WFD_ATTRIBUTES The DOT11_WFD_ATTRIBUTES structure is returned in an NDIS_MINIPORT_ADAPTER_NATIVE_802_11_ATTRIBUTES indication. The structure defines the attributes related to Wi-Fi Direct (WFD) operation modes. |
| DOT11_WFD_CHANNEL The DOT11_WFD_CHANNEL structure contains the channel information for a Peer-to-Pear (P2P) group. |
| DOT11_WFD_CONFIGURATION_TIMEOUT The DOT11_WFD_CONFIGURATION_TIMEOUT structure contains configuration time-out parameters. |
| DOT11_WFD_DEVICE_CAPABILITY_CONFIG The device capability configuration structure sent with an OID_DOT11_WFD_DEVICE_CAPABILITY request. |
| DOT11_WFD_DEVICE_ENTRY The DOT11_WFD_DEVICE_ENTRY structure contains information about a discovered Wi-Fi Direct (WFD) device, a discovered WFD Group Owner (GO), or a discovered infrastructure access point. |
| DOT11_WFD_DEVICE_INFO the DOT11_WFD_DEVICE_INFO structure is included with a OID_DOT11_WFD_DEVICE_INFO request. The structure contains Wi-Fi Direct (WFD) device information related to Peer-to-Peer (P2P) attributes. |
| DOT11_WFD_DEVICE_LISTEN_CHANNEL The DOT11_WFD_DEVICE_LISTEN_CHANNEL structure describes the Wi-Fi Direct device's listen channel when responding to a OID_DOT11_WFD_DEVICE_LISTEN_CHANNEL set or query request. |
| DOT11_WFD_DEVICE_TYPE The DOT11_WFD_DEVICE_TYPE structure is used to specify primary and secondary device types. |
| DOT11_WFD_DISCOVER_COMPLETE_PARAMETERS the DOT11_WFD_DISCOVER_COMPLETE_PARAMETERS structure is returned in a NDIS_STATUS_DOT11_WFD_DISCOVER_COMPLETE indication. |
| DOT11_WFD_DISCOVER_DEVICE_FILTER The DOT11_WFD_DISCOVER _DEVICE_FILTER structure describes a P2P device and Group Owner filter when responding to OID_DOT11_WFD_DISCOVERY_REQUEST requests. |
| DOT11_WFD_DISCOVER_REQUEST The OID_DOT11_WFD_DISCOVER_REQUEST structure is the input data for an OID_DOT11_WFD_DISCOVER_REQUEST request. The structure contains the parameters for a Wi-Fi Direct device discovery. |
| DOT11_WFD_GO_INTENT The DOT11_WFD_GO_INTENT structure represents the Group Intent value used during Group Owner Negotiation |
| DOT11_WFD_GROUP_JOIN_PARAMETERS The DOT11_WFD_GROUP_JOIN_PARAMETERS structure is included with an OID_DOT11_WFD_GROUP_JOIN_PARAMETERS request. The structure contains startup parameters for a Client. |
| DOT11_WFD_GROUP_OWNER_CAPABILITY_CONFIG the DOT11_WFD_GROUP_OWNER_CAPABILITY_CONFIG structure is included with a OID_DOT11_WFD_GROUP_OWNER_CAPABILITY request. The structure contains capability settings for a Peer-to-Peer Group Owner (P2P GO). |
| DOT11_WFD_GROUP_START_PARAMETERS The DOT11_WFD_GROUP_START_PARAMETERS structure is included with an OID_DOT11_WFD_GROUP_START_PARAMETERS request. The structure contains startup parameters for a Group Owner (GO). |
| DOT11_WFD_INVITATION_FLAGS The DOT11_WFD_INVITATION_FLAGS structure represents the Invitation Attributes used during the Invitation procedure. |
| DOT11_WFD_SECONDARY_DEVICE_TYPE_LIST the DOT11_WFD_SECONDARY_DEVICE_TYPE_LIST structure is included with a OID_DOT11_WFD_SECONDARY_DEVICE_TYPE_LIST request. The structure contains the list of secondary device types advertised by a Wi-Fi Direct device. |
| DOT11_WPS_DEVICE_NAME The DOT11_WPS_DEVICE_NAME structure contains a friendly name of the P2P device. |
Enumerations
| DOT11_ASSOCIATION_STATE The DOT11_ASSOCIATION_STATE enumeration is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_DIRECTION The DOT11_DIRECTION enumeration is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_DIVERSITY_SUPPORT The DOT11_DIVERSITY_SUPPORT enumeration is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_PHY_TYPE The DOT11_PHY_TYPE enumeration is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_POWER_MODE The DOT11_POWER_MODE enumeration is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_POWER_MODE_REASON The DOT11_POWER_MODE_REASON lists the different reasons for changes to auto power save mode state. |
| DOT11_TEMP_TYPE The DOT11_TEMP_TYPE enumeration is part of the Native 802.11 Wireless LAN interface, which is deprecated for Windows 10 and later. |
| DOT11_WFD_DISCOVER_TYPE The DOT11_WFD_DISCOVER_TYPE enumeration indicates the mode of Wi-Fi Direct device discovery. |
| DOT11_WFD_SCAN_TYPE The DOT11_WFD_SCAN_TYPE enumeration indicates the type of scan used during the scan phase of device discovery. |
| DOT11_WPS_CONFIG_METHOD The DOT11_WPS_CONFIG_METHOD enumeration specifies the Wi-Fi Protected Setup methods. |
Feedback
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback.
Submit and view feedback for