Debug.WriteLine 메서드
정의
중요
일부 정보는 릴리스되기 전에 상당 부분 수정될 수 있는 시험판 제품과 관련이 있습니다. Microsoft는 여기에 제공된 정보에 대해 어떠한 명시적이거나 묵시적인 보증도 하지 않습니다.
Listeners 컬렉션의 추적 수신기에 디버그에 대한 정보를 씁니다.
오버로드
WriteLine(String, String) |
Listeners 컬렉션의 추적 수신기에 범주 이름 및 메시지를 씁니다. |
WriteLine(String, Object[]) |
Listeners 컬렉션의 추적 수신기에 서식이 지정된 메시지를 쓰고 뒤에 줄 종결자를 붙입니다. |
WriteLine(String) |
Listeners 컬렉션의 추적 수신기에 메시지를 쓰고 뒤에 줄 종결자를 붙입니다. |
WriteLine(Object) |
ToString() 컬렉션의 추적 수신기에 개체의 Listeners 메서드 값을 씁니다. |
WriteLine(Object, String) |
ToString() 컬렉션의 추적 수신기에 범주 이름 및 개체의 Listeners 메서드 값을 씁니다. |
WriteLine(String, String)
- Source:
- Debug.cs
- Source:
- Debug.cs
- Source:
- Debug.cs
Listeners 컬렉션의 추적 수신기에 범주 이름 및 메시지를 씁니다.
public:
static void WriteLine(System::String ^ message, System::String ^ category);
[System.Diagnostics.Conditional("DEBUG")]
public static void WriteLine (string message, string category);
[System.Diagnostics.Conditional("DEBUG")]
public static void WriteLine (string? message, string? category);
[<System.Diagnostics.Conditional("DEBUG")>]
static member WriteLine : string * string -> unit
Public Shared Sub WriteLine (message As String, category As String)
매개 변수
- message
- String
쓸 메시지입니다.
- category
- String
출력을 구성하는 데 사용되는 범주 이름입니다.
- 특성
예제
다음 예제에서는 라는 를 TraceSwitchgeneralSwitch
만듭니다. 이 스위치는 코드 샘플 외부에서 설정됩니다.
스위치가 이상으로 설정된 TraceLevelError
경우 예제에서는 첫 번째 오류 메시지를 에 Listeners출력합니다. 컬렉션에 수신기를 추가하는 방법에 Listeners 대한 자세한 내용은 클래스를 참조하세요 TraceListenerCollection .
그런 다음 가 TraceLevel 로 Verbose
설정된 경우 예제에서는 두 번째 오류 메시지와 를 첫 번째 메시지와 category
동일한 줄에 출력합니다. 줄 종결자는 두 번째 메시지를 따릅니다.
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch^ generalSwitch =
gcnew TraceSwitch( "General","Entire Application" );
public:
static void MyErrorMethod( String^ category )
{
// Write the message if the TraceSwitch level is set to Error or higher.
if ( generalSwitch->TraceError )
{
#if defined(DEBUG)
Debug::Write( "My error message. " );
#endif
}
// Write a second message if the TraceSwitch level is set to Verbose.
if ( generalSwitch->TraceVerbose )
{
#if defined(DEBUG)
Debug::WriteLine( "My second error message.", category );
#endif
}
}
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch generalSwitch = new TraceSwitch("General", "Entire Application");
static public void MyErrorMethod(string category)
{
// Write the message if the TraceSwitch level is set to Error or higher.
if (generalSwitch.TraceError)
Debug.Write("My error message. ");
// Write a second message if the TraceSwitch level is set to Verbose.
if (generalSwitch.TraceVerbose)
Debug.WriteLine("My second error message.", category);
}
' Class-level declaration.
' Create a TraceSwitch.
Private Shared generalSwitch As New TraceSwitch("General", "Entire Application")
Public Shared Sub MyErrorMethod(category As String)
' Write the message if the TraceSwitch level is set to Error or higher.
If generalSwitch.TraceError Then
Debug.Write("My error message. ")
End If
' Write a second message if the TraceSwitch level is set to Verbose.
If generalSwitch.TraceVerbose Then
Debug.WriteLine("My second error message.", category)
End If
End Sub
설명
기본적으로 출력은 의 DefaultTraceListenerinstance 기록됩니다.
매개 변수를 category
사용하여 출력 메시지를 그룹화할 수 있습니다.
이 메서드는 WriteLine 추적 수신기의 메서드를 호출합니다.
추가 정보
- Debug
- Trace
- BooleanSwitch
- TraceSwitch
- TraceListener
- DefaultTraceListener
- ConsoleTraceListener
- ConditionalAttribute
적용 대상
WriteLine(String, Object[])
- Source:
- Debug.cs
- Source:
- Debug.cs
- Source:
- Debug.cs
Listeners 컬렉션의 추적 수신기에 서식이 지정된 메시지를 쓰고 뒤에 줄 종결자를 붙입니다.
public:
static void WriteLine(System::String ^ format, ... cli::array <System::Object ^> ^ args);
[System.Diagnostics.Conditional("DEBUG")]
public static void WriteLine (string format, params object[] args);
[System.Diagnostics.Conditional("DEBUG")]
public static void WriteLine (string format, params object?[] args);
[<System.Diagnostics.Conditional("DEBUG")>]
static member WriteLine : string * obj[] -> unit
Public Shared Sub WriteLine (format As String, ParamArray args As Object())
매개 변수
- format
- String
args
배열의 개체에 해당하는 0개 이상의 형식 항목과 결합된 텍스트를 포함하는 복합 형식 문자열입니다.
- args
- Object[]
형식을 지정할 개체를 0개 이상 포함하는 개체 배열입니다.
- 특성
설명
이 메서드는 .NET 복합 서식 지정 기능을 사용하여 개체의 값을 텍스트 표현으로 변환하고 문자열에 해당 표현을 포함합니다.
이 메서드의 구문에서 매개 변수(C#) 또는 ParamArray(Visual Basic의 경우)키워드(keyword) 는 개체 배열이 단일 값일 수 있음을 의미합니다. 이에 대한 예외는 개체입니다 String . 명시적 오버로드가 우선하므로 arg
단일 문자열의 값은 기본적으로 오버로드로 Debug.WriteLine(String, String) 설정됩니다.
기본적으로 출력은 의 DefaultTraceListenerinstance 기록됩니다.
이 메서드는 TraceListener.WriteLine 추적 수신기의 메서드를 호출합니다.
적용 대상
WriteLine(String)
- Source:
- Debug.cs
- Source:
- Debug.cs
- Source:
- Debug.cs
Listeners 컬렉션의 추적 수신기에 메시지를 쓰고 뒤에 줄 종결자를 붙입니다.
public:
static void WriteLine(System::String ^ message);
[System.Diagnostics.Conditional("DEBUG")]
public static void WriteLine (string message);
[System.Diagnostics.Conditional("DEBUG")]
public static void WriteLine (string? message);
[<System.Diagnostics.Conditional("DEBUG")>]
static member WriteLine : string -> unit
Public Shared Sub WriteLine (message As String)
매개 변수
- message
- String
쓸 메시지입니다.
- 특성
예제
다음 예제에서는 라는 를 TraceSwitchgeneralSwitch
만듭니다. 이 스위치는 코드 샘플 외부에서 설정됩니다.
스위치가 이상으로 설정된 TraceLevelError
경우 예제에서는 첫 번째 오류 메시지를 에 Listeners출력합니다. 컬렉션에 수신기를 추가하는 방법에 Listeners 대한 자세한 내용은 클래스를 참조하세요 TraceListenerCollection .
그런 다음 이 TraceLevel 로 설정된 Verbose
경우 예제에서는 첫 번째 메시지와 동일한 줄에 두 번째 오류 메시지를 출력합니다. 줄 종결자는 두 번째 메시지를 따릅니다.
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch^ generalSwitch =
gcnew TraceSwitch( "General","Entire Application" );
public:
static void MyErrorMethod()
{
// Write the message if the TraceSwitch level is set to Error or higher.
if ( generalSwitch->TraceError )
{
#if defined(DEBUG)
Debug::Write( "My error message. " );
#endif
}
// Write a second message if the TraceSwitch level is set to Verbose.
if ( generalSwitch->TraceVerbose )
{
#if defined(DEBUG)
Debug::WriteLine( "My second error message." );
#endif
}
}
// Class-level declaration.
// Create a TraceSwitch.
TraceSwitch generalSwitch = new TraceSwitch("General", "Entire Application");
static void MyErrorMethod()
{
// Write the message if the TraceSwitch level is set to Error or higher.
if (generalSwitch.TraceError)
Debug.Write("My error message. ");
// Write a second message if the TraceSwitch level is set to Verbose.
if (generalSwitch.TraceVerbose)
Debug.WriteLine("My second error message.");
}
' Class-level declaration.
' Create a TraceSwitch.
Private Shared generalSwitch As New TraceSwitch("General", "Entire Application")
Public Shared Sub MyErrorMethod()
' Write the message if the TraceSwitch level is set to Error or higher.
If generalSwitch.TraceError Then
Debug.Write("My error message. ")
End If
' Write a second message if the TraceSwitch level is set to Verbose.
If generalSwitch.TraceVerbose Then
Debug.WriteLine("My second error message.")
End If
End Sub
설명
기본적으로 출력은 의 DefaultTraceListenerinstance 기록됩니다.
이 메서드는 WriteLine 추적 수신기의 메서드를 호출합니다.
추가 정보
- Debug
- Trace
- BooleanSwitch
- TraceSwitch
- TraceListener
- DefaultTraceListener
- ConsoleTraceListener
- ConditionalAttribute
적용 대상
WriteLine(Object)
- Source:
- Debug.cs
- Source:
- Debug.cs
- Source:
- Debug.cs
ToString() 컬렉션의 추적 수신기에 개체의 Listeners 메서드 값을 씁니다.
public:
static void WriteLine(System::Object ^ value);
[System.Diagnostics.Conditional("DEBUG")]
public static void WriteLine (object value);
[System.Diagnostics.Conditional("DEBUG")]
public static void WriteLine (object? value);
[<System.Diagnostics.Conditional("DEBUG")>]
static member WriteLine : obj -> unit
Public Shared Sub WriteLine (value As Object)
매개 변수
- 특성
예제
다음 예제에서는 라는 를 TraceSwitchgeneralSwitch
만듭니다. 이 스위치는 코드 샘플 외부에서 설정됩니다.
스위치가 이상으로 설정된 TraceLevelError
경우 예제에서는 첫 번째 오류 메시지를 에 Listeners출력합니다. 컬렉션에 수신기를 추가하는 방법에 Listeners 대한 자세한 내용은 클래스를 참조하세요 TraceListenerCollection .
그런 다음 이 TraceLevel 로 설정된 Verbose
경우 예제에서는 첫 번째 메시지와 동일한 줄에 개체의 이름을 출력합니다. 줄 종결자는 두 번째 메시지를 따릅니다.
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch^ generalSwitch =
gcnew TraceSwitch( "General","Entire Application" );
public:
static void MyErrorMethod( Object^ myObject )
{
// Write the message if the TraceSwitch level is set to Error or higher.
if ( generalSwitch->TraceError )
{
#if defined(DEBUG)
Debug::Write( "Invalid object. " );
#endif
}
// Write a second message if the TraceSwitch level is set to Verbose.
if ( generalSwitch->TraceVerbose )
{
#if defined(DEBUG)
Debug::WriteLine( myObject );
#endif
}
}
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch generalSwitch = new TraceSwitch("General", "Entire Application");
static public void MyErrorMethod(Object myObject)
{
// Write the message if the TraceSwitch level is set to Error or higher.
if (generalSwitch.TraceError)
Debug.Write("Invalid object. ");
// Write a second message if the TraceSwitch level is set to Verbose.
if (generalSwitch.TraceVerbose)
Debug.WriteLine(myObject);
}
' Class-level declaration.
' Create a TraceSwitch.
Private Shared generalSwitch As New TraceSwitch("General", "Entire Application")
Public Shared Sub MyErrorMethod(myObject As Object)
' Write the message if the TraceSwitch level is set to Error or higher.
If generalSwitch.TraceError Then
Debug.Write("Invalid object. ")
End If
' Write a second message if the TraceSwitch level is set to Verbose.
If generalSwitch.TraceVerbose Then
Debug.WriteLine(myObject)
End If
End Sub
설명
기본적으로 출력은 의 DefaultTraceListenerinstance 기록됩니다.
이 메서드는 WriteLine 추적 수신기의 메서드를 호출합니다.
추가 정보
- Debug
- Trace
- BooleanSwitch
- TraceSwitch
- TraceListener
- DefaultTraceListener
- ConsoleTraceListener
- ConditionalAttribute
적용 대상
WriteLine(Object, String)
- Source:
- Debug.cs
- Source:
- Debug.cs
- Source:
- Debug.cs
ToString() 컬렉션의 추적 수신기에 범주 이름 및 개체의 Listeners 메서드 값을 씁니다.
public:
static void WriteLine(System::Object ^ value, System::String ^ category);
[System.Diagnostics.Conditional("DEBUG")]
public static void WriteLine (object value, string category);
[System.Diagnostics.Conditional("DEBUG")]
public static void WriteLine (object? value, string? category);
[<System.Diagnostics.Conditional("DEBUG")>]
static member WriteLine : obj * string -> unit
Public Shared Sub WriteLine (value As Object, category As String)
매개 변수
- category
- String
출력을 구성하는 데 사용되는 범주 이름입니다.
- 특성
예제
다음 예제에서는 라는 를 TraceSwitchgeneralSwitch
만듭니다. 이 스위치는 코드 샘플 외부에서 설정됩니다.
스위치가 이상으로 설정된 TraceLevelError
경우 예제에서는 첫 번째 오류 메시지를 에 Listeners출력합니다. 컬렉션에 수신기를 추가하는 방법에 Listeners 대한 자세한 내용은 클래스를 참조하세요 TraceListenerCollection .
그런 다음 이 TraceLevel 로 설정된 Verbose
경우 예제에서는 첫 번째 메시지와 동일한 줄에 두 번째 오류 메시지를 출력합니다. 두 번째 메시지 뒤에 줄 종결자가 표시됩니다.
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch^ generalSwitch =
gcnew TraceSwitch( "General","Entire Application" );
public:
static void MyErrorMethod( Object^ myObject, String^ category )
{
// Write the message if the TraceSwitch level is set to Error or higher.
if ( generalSwitch->TraceError )
{
#if defined(DEBUG)
Debug::Write( "Invalid object for category. " );
#endif
}
// Write a second message if the TraceSwitch level is set to Verbose.
if ( generalSwitch->TraceVerbose )
{
#if defined(DEBUG)
Debug::WriteLine( myObject, category );
#endif
}
}
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch generalSwitch = new TraceSwitch("General", "Entire Application");
static public void MyErrorMethod(Object myObject, string category)
{
// Write the message if the TraceSwitch level is set to Error or higher.
if (generalSwitch.TraceError)
Debug.Write("Invalid object for category. ");
// Write a second message if the TraceSwitch level is set to Verbose.
if (generalSwitch.TraceVerbose)
Debug.WriteLine(myObject, category);
}
' Class-level declaration.
' Create a TraceSwitch.
Private Shared generalSwitch As New TraceSwitch("General", "Entire Application")
Public Shared Sub MyErrorMethod(myObject As Object, category As String)
' Write the message if the TraceSwitch level is set to Error or higher.
If generalSwitch.TraceError Then
Debug.Write("Invalid object for category. ")
End If
' Write a second message if the TraceSwitch level is set to Verbose.
If generalSwitch.TraceVerbose Then
Debug.WriteLine(myObject, category)
End If
End Sub
설명
기본적으로 출력은 의 DefaultTraceListenerinstance 기록됩니다.
매개 변수를 category
사용하여 출력 메시지를 그룹화할 수 있습니다.
이 메서드는 WriteLine 추적 수신기의 메서드를 호출합니다.
추가 정보
- Debug
- Trace
- BooleanSwitch
- TraceSwitch
- TraceListener
- DefaultTraceListener
- ConsoleTraceListener
- ConditionalAttribute
적용 대상
.NET
피드백
https://aka.ms/ContentUserFeedback
출시 예정: 2024년 내내 콘텐츠에 대한 피드백 메커니즘으로 GitHub 문제를 단계적으로 폐지하고 이를 새로운 피드백 시스템으로 바꿀 예정입니다. 자세한 내용은 다음을 참조하세요.다음에 대한 사용자 의견 제출 및 보기