다음을 통해 공유


Application.Run 메서드

정의

현재 스레드에서 표준 애플리케이션 메시지 루프를 실행하기 시작합니다.

오버로드

Run()

폼을 사용하지 않고 현재 스레드에서 표준 애플리케이션 메시지 루프를 실행하기 시작합니다.

Run(ApplicationContext)

ApplicationContext를 사용하여 현재 스레드에서 표준 애플리케이션 메시지 루프를 실행하기 시작합니다.

Run(Form)

현재 스레드에서 표준 애플리케이션 메시지 루프의 실행을 시작하고 지정된 폼을 표시합니다.

Run()

폼을 사용하지 않고 현재 스레드에서 표준 애플리케이션 메시지 루프를 실행하기 시작합니다.

public:
 static void Run();
public static void Run ();
static member Run : unit -> unit
Public Shared Sub Run ()

예외

주 메시지 루프가 이미 이 스레드에서 실행되고 있는 경우

설명

Win32 기반 또는 Windows Forms 애플리케이션 메시지 루프는 마우스 클릭과 키보드 입력과 같은 사용자 이벤트를 처리 하는 코드에서 루틴입니다. 모든 실행 중인 Windows 기반 애플리케이션에는 주 메시지 루프를 호출 하는 활성 메시지 루프에 필요 합니다. 주 메시지 루프가 종료 되 면 애플리케이션이 종료 됩니다. Windows Forms 메서드가 호출되거나 ExitThread 기본 메시지 루프를 실행하는 스레드에서 메서드가 호출되면 이 루프가 닫힙니다Exit.

대부분의 Windows Forms 개발자는 이 버전의 메서드를 사용할 필요가 없습니다. 기능을 사용할지는 Run(Form) 오버 로드를 기본 폼이 닫힐 때 애플리케이션이 종료 되도록 기본 폼을 사용 하 여 애플리케이션을 시작 합니다. 기타 모든 상황에 대 한 사용 합니다 Run(ApplicationContext) 오버 로드를 제공 하는 것이 지는 ApplicationContext 보다 효과적으로 제어할 애플리케이션의 수명에 대 한 개체입니다.

추가 정보

적용 대상

Run(ApplicationContext)

ApplicationContext를 사용하여 현재 스레드에서 표준 애플리케이션 메시지 루프를 실행하기 시작합니다.

public:
 static void Run(System::Windows::Forms::ApplicationContext ^ context);
public static void Run (System.Windows.Forms.ApplicationContext context);
static member Run : System.Windows.Forms.ApplicationContext -> unit
Public Shared Sub Run (context As ApplicationContext)

매개 변수

context
ApplicationContext

애플리케이션이 실행되는 ApplicationContext입니다.

예외

주 메시지 루프가 이미 이 스레드에서 실행되고 있는 경우

예제

예제에서는 두 개의 폼을 표시 하 고 모두 폼이 닫히면 애플리케이션을 종료 합니다. 애플리케이션 시작 및 종료, 경우에 각 폼의 위치가 기억 됩니다. 이 예제에 사용 하는 방법을 보여 줍니다.는 ApplicationContext, 함께 Application.Run(context) 애플리케이션을 시작 하는 경우 여러 개의 폼을 표시할 메서드.

클래스 MyApplicationContext 는 에서 ApplicationContext 상속되고 각 양식이 닫힌 시기를 추적하고 둘 다 있을 때 현재 스레드를 종료합니다. 클래스는 사용자에 대한 각 양식의 위치를 저장합니다. 양식 위치 데이터는 에 의해 UserAppDataPath결정된 Appdata.txt 위치에 만들어지는 파일로 저장됩니다. 합니다 Main 메서드 호출 Application.Run(context) 지정 하는 애플리케이션을 시작 합니다 ApplicationContext합니다.

AppForm2 양식에 AppForm1 대한 코드는 간결함을 위해 표시되지 않습니다. ApplicationContext 전체 코드 목록에 대한 클래스 개요를 참조하세요.

// The class that handles the creation of the application windows
ref class MyApplicationContext: public ApplicationContext
{
private:
   int _formCount;
   AppForm1^ _form1;
   AppForm2^ _form2;
   System::Drawing::Rectangle _form1Position;
   System::Drawing::Rectangle _form2Position;
   FileStream^ _userData;

public:

   MyApplicationContext()
   {
      _formCount = 0;
      
      // Handle the ApplicationExit event to know when the application is exiting.
      Application::ApplicationExit += gcnew EventHandler( this, &MyApplicationContext::OnApplicationExit );
      try
      {
         
         // Create a file that the application will store user specific data in.
         _userData = gcnew FileStream( String::Concat( Application::UserAppDataPath, "\\appdata.txt" ),FileMode::OpenOrCreate );
      }
      catch ( IOException^ e ) 
      {
         
         // Inform the user that an error occurred.
         MessageBox::Show( "An error occurred while attempting to show the application. The error is: {0}", dynamic_cast<String^>(e) );
         
         // Exit the current thread instead of showing the windows.
         ExitThread();
      }

      
      // Create both application forms and handle the Closed event
      // to know when both forms are closed.
      _form1 = gcnew AppForm1;
      _form1->Closed += gcnew EventHandler( this, &MyApplicationContext::OnFormClosed );
      _form1->Closing += gcnew CancelEventHandler( this, &MyApplicationContext::OnFormClosing );
      _formCount++;
      _form2 = gcnew AppForm2;
      _form2->Closed += gcnew EventHandler( this, &MyApplicationContext::OnFormClosed );
      _form2->Closing += gcnew CancelEventHandler( this, &MyApplicationContext::OnFormClosing );
      _formCount++;
      
      // Get the form positions based upon the user specific data.
      if ( ReadFormDataFromFile() )
      {
         
         // If the data was read from the file, set the form
         // positions manually.
         _form1->StartPosition = FormStartPosition::Manual;
         _form2->StartPosition = FormStartPosition::Manual;
         _form1->Bounds = _form1Position;
         _form2->Bounds = _form2Position;
      }

      
      // Show both forms.
      _form1->Show();
      _form2->Show();
   }

   void OnApplicationExit( Object^ /*sender*/, EventArgs^ /*e*/ )
   {
      
      // When the application is exiting, write the application data to the
      // user file and close it.
      WriteFormDataToFile();
      try
      {
         
         // Ignore any errors that might occur while closing the file handle.
         _userData->Close();
      }
      catch ( Exception^ ) 
      {
      }

   }

private:

   void OnFormClosing( Object^ sender, CancelEventArgs^ /*e*/ )
   {
      
      // When a form is closing, remember the form position so it
      // can be saved in the user data file.
      if ( dynamic_cast<AppForm1^>(sender) != nullptr )
            _form1Position = (dynamic_cast<Form^>(sender))->Bounds;
      else
      if ( dynamic_cast<AppForm1^>(sender) != nullptr )
            _form2Position = (dynamic_cast<Form^>(sender))->Bounds;
   }

   void OnFormClosed( Object^ /*sender*/, EventArgs^ /*e*/ )
   {
      
      // When a form is closed, decrement the count of open forms.
      // When the count gets to 0, exit the app by calling
      // ExitThread().
      _formCount--;
      if ( _formCount == 0 )
      {
         ExitThread();
      }
   }

   bool WriteFormDataToFile()
   {
      
      // Write the form positions to the file.
      UTF8Encoding^ encoding = gcnew UTF8Encoding;
      RectangleConverter^ rectConv = gcnew RectangleConverter;
      String^ form1pos = rectConv->ConvertToString( _form1Position );
      String^ form2pos = rectConv->ConvertToString( _form2Position );
      array<Byte>^dataToWrite = encoding->GetBytes( String::Concat( "~", form1pos, "~", form2pos ) );
      try
      {
         
         // Set the write position to the start of the file and write
         _userData->Seek( 0, SeekOrigin::Begin );
         _userData->Write( dataToWrite, 0, dataToWrite->Length );
         _userData->Flush();
         _userData->SetLength( dataToWrite->Length );
         return true;
      }
      catch ( Exception^ ) 
      {
         
         // An error occurred while attempting to write, return false.
         return false;
      }

   }

   bool ReadFormDataFromFile()
   {
      
      // Read the form positions from the file.
      UTF8Encoding^ encoding = gcnew UTF8Encoding;
      String^ data;
      if ( _userData->Length != 0 )
      {
         array<Byte>^dataToRead = gcnew array<Byte>(_userData->Length);
         try
         {
            
            // Set the read position to the start of the file and read.
            _userData->Seek( 0, SeekOrigin::Begin );
            _userData->Read( dataToRead, 0, dataToRead->Length );
         }
         catch ( IOException^ e ) 
         {
            String^ errorInfo = dynamic_cast<String^>(e);
            
            // An error occurred while attempt to read, return false.
            return false;
         }
         
         // Parse out the data to get the window rectangles
         data = encoding->GetString( dataToRead );
         try
         {
            
            // Convert the String* data to rectangles
            RectangleConverter^ rectConv = gcnew RectangleConverter;
            String^ form1pos = data->Substring( 1, data->IndexOf( "~", 1 ) - 1 );
            _form1Position =  *safe_cast<Rectangle^>(rectConv->ConvertFromString( form1pos ));
            String^ form2pos = data->Substring( data->IndexOf( "~", 1 ) + 1 );
            _form2Position =  *safe_cast<Rectangle^>(rectConv->ConvertFromString( form2pos ));
            return true;
         }
         catch ( Exception^ ) 
         {
            
            // Error occurred while attempting to convert the rectangle data.
            // Return false to use default values.
            return false;
         }
      }
      else
      {
         
         // No data in the file, return false to use default values.
         return false;
      }
   }
};
// The class that handles the creation of the application windows
class MyApplicationContext : ApplicationContext
{

    private int _formCount;
    private AppForm1 _form1;
    private AppForm2 _form2;

    private Rectangle _form1Position;
    private Rectangle _form2Position;

    private FileStream _userData;

    private MyApplicationContext()
    {
        _formCount = 0;

        // Handle the ApplicationExit event to know when the application is exiting.
        Application.ApplicationExit += new EventHandler(this.OnApplicationExit);

        try
        {
            // Create a file that the application will store user specific data in.
            _userData = new FileStream(Application.UserAppDataPath + "\\appdata.txt", FileMode.OpenOrCreate);
        }
        catch (IOException e)
        {
            // Inform the user that an error occurred.
            MessageBox.Show("An error occurred while attempting to show the application." +
                            "The error is:" + e.ToString());

            // Exit the current thread instead of showing the windows.
            ExitThread();
        }

        // Create both application forms and handle the Closed event
        // to know when both forms are closed.
        _form1 = new AppForm1();
        _form1.Closed += new EventHandler(OnFormClosed);
        _form1.Closing += new CancelEventHandler(OnFormClosing);
        _formCount++;

        _form2 = new AppForm2();
        _form2.Closed += new EventHandler(OnFormClosed);
        _form2.Closing += new CancelEventHandler(OnFormClosing);
        _formCount++;

        // Get the form positions based upon the user specific data.
        if (ReadFormDataFromFile())
        {
            // If the data was read from the file, set the form
            // positions manually.
            _form1.StartPosition = FormStartPosition.Manual;
            _form2.StartPosition = FormStartPosition.Manual;

            _form1.Bounds = _form1Position;
            _form2.Bounds = _form2Position;
        }

        // Show both forms.
        _form1.Show();
        _form2.Show();
    }

    private void OnApplicationExit(object sender, EventArgs e)
    {
        // When the application is exiting, write the application data to the
        // user file and close it.
        WriteFormDataToFile();

        try
        {
            // Ignore any errors that might occur while closing the file handle.
            _userData.Close();
        }
        catch { }
    }

    private void OnFormClosing(object sender, CancelEventArgs e)
    {
        // When a form is closing, remember the form position so it
        // can be saved in the user data file.
        if (sender is AppForm1)
            _form1Position = ((Form)sender).Bounds;
        else if (sender is AppForm2)
            _form2Position = ((Form)sender).Bounds;
    }

    private void OnFormClosed(object sender, EventArgs e)
    {
        // When a form is closed, decrement the count of open forms.

        // When the count gets to 0, exit the app by calling
        // ExitThread().
        _formCount--;
        if (_formCount == 0)
        {
            ExitThread();
        }
    }

    private bool WriteFormDataToFile()
    {
        // Write the form positions to the file.
        UTF8Encoding encoding = new UTF8Encoding();

        RectangleConverter rectConv = new RectangleConverter();
        string form1pos = rectConv.ConvertToString(_form1Position);
        string form2pos = rectConv.ConvertToString(_form2Position);

        byte[] dataToWrite = encoding.GetBytes("~" + form1pos + "~" + form2pos);

        try
        {
            // Set the write position to the start of the file and write
            _userData.Seek(0, SeekOrigin.Begin);
            _userData.Write(dataToWrite, 0, dataToWrite.Length);
            _userData.Flush();

            _userData.SetLength(dataToWrite.Length);
            return true;
        }
        catch
        {
            // An error occurred while attempting to write, return false.
            return false;
        }
    }

    private bool ReadFormDataFromFile()
    {
        // Read the form positions from the file.
        UTF8Encoding encoding = new UTF8Encoding();
        string data;

        if (_userData.Length != 0)
        {
            byte[] dataToRead = new byte[_userData.Length];

            try
            {
                // Set the read position to the start of the file and read.
                _userData.Seek(0, SeekOrigin.Begin);
                _userData.Read(dataToRead, 0, dataToRead.Length);
            }
            catch (IOException e)
            {
                string errorInfo = e.ToString();
                // An error occurred while attempt to read, return false.
                return false;
            }

            // Parse out the data to get the window rectangles
            data = encoding.GetString(dataToRead);

            try
            {
                // Convert the string data to rectangles
                RectangleConverter rectConv = new RectangleConverter();
                string form1pos = data.Substring(1, data.IndexOf("~", 1) - 1);

                _form1Position = (Rectangle)rectConv.ConvertFromString(form1pos);

                string form2pos = data.Substring(data.IndexOf("~", 1) + 1);
                _form2Position = (Rectangle)rectConv.ConvertFromString(form2pos);

                return true;
            }
            catch
            {
                // Error occurred while attempting to convert the rectangle data.
                // Return false to use default values.
                return false;
            }
        }
        else
        {
            // No data in the file, return false to use default values.
            return false;
        }
    }

    [STAThread]
    static void Main(string[] args)
    {

        // Create the MyApplicationContext, that derives from ApplicationContext,
        // that manages when the application should exit.

        MyApplicationContext context = new MyApplicationContext();

        // Run the application with the specific context. It will exit when
        // all forms are closed.
        Application.Run(context);
    }
}
' The class that handles the creation of the application windows
Public Class MyApplicationContext
    Inherits ApplicationContext

    Private _formCount As Integer
    Private _form1 As AppForm1
    Private _form2 As AppForm2

    Private _form1Position As Rectangle
    Private _form2Position As Rectangle

    Private _userData As FileStream

    Public Sub New()
        MyBase.New()
        _formCount = 0

        ' Handle the ApplicationExit event to know when the application is exiting.
        AddHandler Application.ApplicationExit, AddressOf OnApplicationExit

        Try
            ' Create a file that the application will store user specific data in.
            _userData = New FileStream(Application.UserAppDataPath + "\appdata.txt", FileMode.OpenOrCreate)

        Catch e As IOException
            ' Inform the user that an error occurred.
            MessageBox.Show("An error occurred while attempting to show the application." +
                            "The error is:" + e.ToString())

            ' Exit the current thread instead of showing the windows.
            ExitThread()
        End Try

        ' Create both application forms and handle the Closed event
        ' to know when both forms are closed.
        _form1 = New AppForm1()
        AddHandler _form1.Closed, AddressOf OnFormClosed
        AddHandler _form1.Closing, AddressOf OnFormClosing
        _formCount = _formCount + 1

        _form2 = New AppForm2()
        AddHandler _form2.Closed, AddressOf OnFormClosed
        AddHandler _form2.Closing, AddressOf OnFormClosing
        _formCount = _formCount + 1

        ' Get the form positions based upon the user specific data.
        If (ReadFormDataFromFile()) Then
            ' If the data was read from the file, set the form
            ' positions manually.
            _form1.StartPosition = FormStartPosition.Manual
            _form2.StartPosition = FormStartPosition.Manual

            _form1.Bounds = _form1Position
            _form2.Bounds = _form2Position
        End If

        ' Show both forms.
        _form1.Show()
        _form2.Show()
    End Sub

    Private Sub OnApplicationExit(ByVal sender As Object, ByVal e As EventArgs)
        ' When the application is exiting, write the application data to the
        ' user file and close it.
        WriteFormDataToFile()

        Try
            ' Ignore any errors that might occur while closing the file handle.
            _userData.Close()
        Catch
        End Try
    End Sub

    Private Sub OnFormClosing(ByVal sender As Object, ByVal e As CancelEventArgs)
        ' When a form is closing, remember the form position so it
        ' can be saved in the user data file.
        If TypeOf sender Is AppForm1 Then
            _form1Position = CType(sender, Form).Bounds
        ElseIf TypeOf sender Is AppForm2 Then
            _form2Position = CType(sender, Form).Bounds
        End If
    End Sub

    Private Sub OnFormClosed(ByVal sender As Object, ByVal e As EventArgs)
        ' When a form is closed, decrement the count of open forms.

        ' When the count gets to 0, exit the app by calling
        ' ExitThread().
        _formCount = _formCount - 1
        If (_formCount = 0) Then
            ExitThread()
        End If
    End Sub

    Private Function WriteFormDataToFile() As Boolean
        ' Write the form positions to the file.
        Dim encoding As UTF8Encoding = New UTF8Encoding()

        Dim rectConv As RectangleConverter = New RectangleConverter()
        Dim form1pos As String = rectConv.ConvertToString(_form1Position)
        Dim form2pos As String = rectConv.ConvertToString(_form2Position)

        Dim dataToWrite As Byte() = encoding.GetBytes("~" + form1pos + "~" + form2pos)

        Try
            ' Set the write position to the start of the file and write
            _userData.Seek(0, SeekOrigin.Begin)
            _userData.Write(dataToWrite, 0, dataToWrite.Length)
            _userData.Flush()

            _userData.SetLength(dataToWrite.Length)
            Return True

        Catch
            ' An error occurred while attempting to write, return false.
            Return False
        End Try

    End Function

    Private Function ReadFormDataFromFile() As Boolean
        ' Read the form positions from the file.
        Dim encoding As UTF8Encoding = New UTF8Encoding()
        Dim data As String

        If (_userData.Length <> 0) Then
            Dim dataToRead(_userData.Length) As Byte

            Try
                ' Set the read position to the start of the file and read.
                _userData.Seek(0, SeekOrigin.Begin)
                _userData.Read(dataToRead, 0, dataToRead.Length)

            Catch e As IOException
                Dim errorInfo As String = e.ToString()
                ' An error occurred while attempt to read, return false.
                Return False
            End Try

            ' Parse out the data to get the window rectangles
            data = encoding.GetString(dataToRead)

            Try
                ' Convert the string data to rectangles
                Dim rectConv As RectangleConverter = New RectangleConverter()
                Dim form1pos As String = data.Substring(1, data.IndexOf("~", 1) - 1)

                _form1Position = CType(rectConv.ConvertFromString(form1pos), Rectangle)

                Dim form2pos As String = data.Substring(data.IndexOf("~", 1) + 1)
                _form2Position = CType(rectConv.ConvertFromString(form2pos), Rectangle)

                Return True

            Catch
                ' Error occurred while attempting to convert the rectangle data.
                ' Return false to use default values.
                Return False
            End Try

        Else
            ' No data in the file, return false to use default values.
            Return False
        End If
    End Function

End Class

Public Module MyApplication
    Public Sub Main()
        ' Create the MyApplicationContext, that derives from ApplicationContext,
        ' that manages when the application should exit.

        Dim context As MyApplicationContext = New MyApplicationContext()

        ' Run the application with the specific context. It will exit when
        ' all forms are closed.
        Application.Run(context)
    End Sub
End Module

설명

메시지 루프는 또는 ExitThread 가 호출되거나 컨텍스트 개체에서 ThreadExit 이벤트가 발생할 때까지 Exit 실행됩니다.

추가 정보

적용 대상

Run(Form)

현재 스레드에서 표준 애플리케이션 메시지 루프의 실행을 시작하고 지정된 폼을 표시합니다.

public:
 static void Run(System::Windows::Forms::Form ^ mainForm);
public static void Run (System.Windows.Forms.Form mainForm);
static member Run : System.Windows.Forms.Form -> unit
Public Shared Sub Run (mainForm As Form)

매개 변수

mainForm
Form

표시하려는 폼을 나타내는 Form입니다.

예외

주 메시지 루프가 이미 현재 스레드에서 실행되고 있는 경우

예제

다음 코드 예제에서는 폼의 목록 상자에 숫자를 나열합니다. 클릭할 때마다 button1, 애플리케이션 목록에 다른 숫자를 추가 합니다.

합니다 Main 메서드 호출 Run 폼을 만드는 애플리케이션을 시작할 listBox1, 및 button1합니다. 사용자가 를 클릭하면 button1메서드는 button1_Click 목록 상자에 1~3개의 숫자를 추가하고 를 표시합니다 MessageBox. 사용자가 에서 아니요MessageBox클릭하면 메서드가 button1_Click 목록에 다른 숫자를 추가합니다. 사용자가 클릭 하면 , 애플리케이션이 호출 Exit 큐에 남아 있는 모든 메시지를 처리 하 고 종료 됩니다.

이 예제에서는 및 가 listBox1button1 양식에 만들어지고 배치되어야 합니다.

public:
   static void main()
   {
      // Starts the application.
      Application::Run( gcnew Form1 );
   }

private:
   void button1_Click( Object^ sender, System::EventArgs^ e )
   {
      // Populates a list box with three numbers.
      int i = 3;
      for ( int j = 1; j <= i; j++ )
      {
         listBox1->Items->Add( j );
      }
      
      /* Determines whether the user wants to exit the application.
       * If not, adds another number to the list box. */
      while ( MessageBox::Show( "Exit application?", "",
         MessageBoxButtons::YesNo ) == ::DialogResult::No )
      {
         // Increments the counter ands add the number to the list box.
         i++;
         listBox1->Items->Add( i );
      }
      
      // The user wants to exit the application. Close everything down.
      Application::Exit();
   }
public static void Main(string[] args) {
    // Starts the application.
    Application.Run(new Form1());
 }

 private void button1_Click(object sender, System.EventArgs e) {
    // Populates a list box with three numbers.
    int i = 3;
    for(int j=1; j<=i; j++) {
       listBox1.Items.Add(j);
    }

    /* Determines whether the user wants to exit the application.
     * If not, adds another number to the list box. */
    while (MessageBox.Show("Exit application?", "", MessageBoxButtons.YesNo) ==
       DialogResult.No) {
       // Increments the counter ands add the number to the list box.
       i++;
       listBox1.Items.Add(i);
    }

    // The user wants to exit the application. Close everything down.
    Application.Exit();
 }
<STAThread()> _
Shared Sub Main() 	
   ' Starts the application.
   Application.Run(New Form1())
End Sub

Private Sub button1_Click(sender As object, e As System.EventArgs)
   ' Populates a list box with three numbers.
   Dim i As Integer = 3
   Dim j As Integer
   For j = 1 To i - 1
      listBox1.Items.Add(j)
   Next

   ' Checks to see whether the user wants to exit the application.
   ' If not, adds another number to the list box.
   While (MessageBox.Show("Exit application?", "", MessageBoxButtons.YesNo) = _ 
      DialogResult.No)
      ' Increments the counter and adds the number to the list box.
      i = i + 1
      listBox1.Items.Add(i)
   End While

   ' The user wants to exit the application. Close everything down.
   Application.Exit()
End Sub

설명

일반적으로 애플리케이션의 main 함수는이 메서드를 호출 하 고 애플리케이션의 주 창에 전달 합니다.

이 메서드는 이벤트의 매개 변수에 mainForm 이벤트 처리기를 추가합니다 Closed . 이벤트 처리기 호출을 ExitThread 애플리케이션을 정리 합니다.

참고

클래스의 Form 메서드는 Dispose 이 메서드를 반환하기 전에 호출됩니다.

추가 정보

적용 대상