Trace.WriteLine 메서드
정의
중요
일부 정보는 릴리스되기 전에 상당 부분 수정될 수 있는 시험판 제품과 관련이 있습니다. Microsoft는 여기에 제공된 정보에 대해 어떠한 명시적이거나 묵시적인 보증도 하지 않습니다.
Listeners 컬렉션의 추적 수신기에 추적에 대한 정보를 씁니다.
오버로드
WriteLine(Object) |
ToString() 컬렉션의 추적 수신기에 개체의 Listeners 메서드 값을 씁니다. |
WriteLine(String) |
Listeners 컬렉션의 추적 수신기에 메시지를 씁니다. |
WriteLine(Object, String) |
ToString() 컬렉션의 추적 수신기에 범주 이름 및 개체의 Listeners 메서드 값을 씁니다. |
WriteLine(String, String) |
Listeners 컬렉션의 추적 수신기에 범주 이름 및 메시지를 씁니다. |
WriteLine(Object)
- Source:
- Trace.cs
- Source:
- Trace.cs
- Source:
- Trace.cs
ToString() 컬렉션의 추적 수신기에 개체의 Listeners 메서드 값을 씁니다.
public:
static void WriteLine(System::Object ^ value);
[System.Diagnostics.Conditional("TRACE")]
public static void WriteLine (object? value);
[System.Diagnostics.Conditional("TRACE")]
public static void WriteLine (object value);
[<System.Diagnostics.Conditional("TRACE")>]
static member WriteLine : obj -> unit
Public Shared Sub WriteLine (value As Object)
매개 변수
- 특성
예제
다음 예제에서는 라는 를 TraceSwitchgeneralSwitch
만듭니다. 이 스위치는 코드 샘플 외부에서 설정됩니다.
스위치가 이상으로 설정된 TraceLevelError
경우 예제에서는 첫 번째 오류 메시지를 에 Listeners출력합니다. 컬렉션에 수신기를 추가하는 방법에 Listeners 대한 자세한 내용은 클래스를 참조하세요 TraceListenerCollection .
그런 다음 이 TraceLevel 로 설정된 Verbose
경우 예제에서는 첫 번째 메시지와 동일한 줄에 개체의 이름을 출력합니다. 두 번째 메시지 뒤에 줄 종결자가 표시됩니다.
// Class-level declaration.
// Create a TraceSwitch.
private:
static TraceSwitch^ generalSwitch =
gcnew TraceSwitch( "General", "Entire Application" );
public:
static void MyErrorMethod( Object^ myObject )
{
#if defined(TRACE)
// Write the message if the TraceSwitch level
// is set to Error or higher.
if ( generalSwitch->TraceError )
{
Trace::Write( "Invalid object. " );
}
// Write a second message if the TraceSwitch level
// is set to Verbose.
if ( generalSwitch->TraceVerbose )
{
Trace::WriteLine( myObject );
}
#endif
}
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch generalSwitch = new TraceSwitch("General", "Entire Application");
static public void MyErrorMethod(Object myObject) {
// Write the message if the TraceSwitch level is set to Error or higher.
if(generalSwitch.TraceError)
Trace.Write("Invalid object. ");
// Write a second message if the TraceSwitch level is set to Verbose.
if(generalSwitch.TraceVerbose)
Trace.WriteLine(myObject);
}
' Class-level declaration.
' Create a TraceSwitch.
Private Shared generalSwitch As New TraceSwitch("General", "Entire Application")
Public Shared Sub MyErrorMethod(myObject As Object)
' Write the message if the TraceSwitch level is set to Error or higher.
If generalSwitch.TraceError Then
Trace.Write("Invalid object. ")
End If
' Write a second message if the TraceSwitch level is set to Verbose.
If generalSwitch.TraceVerbose Then
Trace.WriteLine(myObject)
End If
End Sub
설명
기본적으로 출력은 의 DefaultTraceListenerinstance 기록됩니다.
이 메서드는 WriteLine 추적 수신기의 메서드를 호출합니다.
추가 정보
적용 대상
WriteLine(String)
- Source:
- Trace.cs
- Source:
- Trace.cs
- Source:
- Trace.cs
Listeners 컬렉션의 추적 수신기에 메시지를 씁니다.
public:
static void WriteLine(System::String ^ message);
[System.Diagnostics.Conditional("TRACE")]
public static void WriteLine (string? message);
[System.Diagnostics.Conditional("TRACE")]
public static void WriteLine (string message);
[<System.Diagnostics.Conditional("TRACE")>]
static member WriteLine : string -> unit
Public Shared Sub WriteLine (message As String)
매개 변수
- message
- String
쓸 메시지입니다.
- 특성
예제
다음 예제에서는 라는 를 TraceSwitchgeneralSwitch
만듭니다. 이 스위치는 코드 샘플 외부에서 설정됩니다.
스위치가 이상으로 설정된 TraceLevelError
경우 예제에서는 첫 번째 오류 메시지를 에 Listeners출력합니다. 컬렉션에 수신기를 추가하는 방법에 Listeners 대한 자세한 내용은 클래스를 참조하세요 TraceListenerCollection .
그런 다음 이 TraceLevel 로 설정된 Verbose
경우 예제에서는 첫 번째 메시지와 동일한 줄에 두 번째 오류 메시지를 출력합니다. 두 번째 메시지 뒤에 줄 종결자가 표시됩니다.
// Class-level declaration.
// Create a TraceSwitch.
private:
static TraceSwitch^ generalSwitch =
gcnew TraceSwitch( "General", "Entire Application" );
public:
static void MyErrorMethod()
{
// Write the message if the TraceSwitch level is set
// to Error or higher.
if ( generalSwitch->TraceError )
{
Trace::Write( "My error message. " );
}
// Write a second message if the TraceSwitch level is set
// to Verbose.
if ( generalSwitch->TraceVerbose )
{
Trace::WriteLine( "My second error message." );
}
}
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch generalSwitch = new TraceSwitch("General", "Entire Application");
static public void MyErrorMethod() {
// Write the message if the TraceSwitch level is set to Error or higher.
if(generalSwitch.TraceError)
Trace.Write("My error message. ");
// Write a second message if the TraceSwitch level is set to Verbose.
if(generalSwitch.TraceVerbose)
Trace.WriteLine("My second error message.");
}
' Class-level declaration.
' Create a TraceSwitch.
Private Shared generalSwitch As New TraceSwitch("General", "Entire Application")
Public Shared Sub MyErrorMethod()
' Write the message if the TraceSwitch level is set to Error or higher.
If generalSwitch.TraceError Then
Trace.Write("My error message. ")
End If
' Write a second message if the TraceSwitch level is set to Verbose.
If generalSwitch.TraceVerbose Then
Trace.WriteLine("My second error message.")
End If
End Sub
설명
기본적으로 출력은 의 DefaultTraceListenerinstance 기록됩니다.
이 메서드는 WriteLine 추적 수신기의 메서드를 호출합니다.
추가 정보
적용 대상
WriteLine(Object, String)
- Source:
- Trace.cs
- Source:
- Trace.cs
- Source:
- Trace.cs
ToString() 컬렉션의 추적 수신기에 범주 이름 및 개체의 Listeners 메서드 값을 씁니다.
public:
static void WriteLine(System::Object ^ value, System::String ^ category);
[System.Diagnostics.Conditional("TRACE")]
public static void WriteLine (object? value, string? category);
[System.Diagnostics.Conditional("TRACE")]
public static void WriteLine (object value, string category);
[<System.Diagnostics.Conditional("TRACE")>]
static member WriteLine : obj * string -> unit
Public Shared Sub WriteLine (value As Object, category As String)
매개 변수
- category
- String
출력을 구성하는 데 사용되는 범주 이름입니다.
- 특성
예제
다음 예제에서는 라는 를 TraceSwitchgeneralSwitch
만듭니다. 이 스위치는 코드 샘플 외부에서 설정됩니다.
스위치가 이상으로 설정된 TraceLevelError
경우 예제에서는 첫 번째 오류 메시지를 에 Listeners출력합니다. 컬렉션에 수신기를 추가하는 방법에 Listeners 대한 자세한 내용은 클래스를 참조하세요 TraceListenerCollection .
그런 다음 이 TraceLevel 로 설정된 Verbose
경우 예제에서는 첫 번째 메시지와 동일한 줄에 두 번째 오류 메시지를 출력합니다. 두 번째 메시지 뒤에 줄 종결자가 표시됩니다.
// Class-level declaration.
// Create a TraceSwitch.
private:
static TraceSwitch^ generalSwitch =
gcnew TraceSwitch( "General", "Entire Application" );
public:
static void MyErrorMethod( Object^ myObject, String^ category )
{
#if defined(TRACE)
// Write the message if the TraceSwitch level
// is set to Error or higher.
if ( generalSwitch->TraceError )
{
Trace::Write( "Invalid object for category. " );
}
// Write a second message if the TraceSwitch level
// is set to Verbose.
if ( generalSwitch->TraceVerbose )
{
Trace::WriteLine( myObject, category );
}
#endif
}
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch generalSwitch = new TraceSwitch("General", "Entire Application");
static public void MyErrorMethod(Object myObject, string category) {
// Write the message if the TraceSwitch level is set to Error or higher.
if(generalSwitch.TraceError)
Trace.Write("Invalid object for category. ");
// Write a second message if the TraceSwitch level is set to Verbose.
if(generalSwitch.TraceVerbose)
Trace.WriteLine(myObject, category);
}
' Class-level declaration.
' Create a TraceSwitch.
Private Shared generalSwitch As New TraceSwitch("General", "Entire Application")
Public Shared Sub MyErrorMethod(myObject As Object, category As String)
' Write the message if the TraceSwitch level is set to Error or higher.
If generalSwitch.TraceError Then
Trace.Write("Invalid object for category. ")
End If
' Write a second message if the TraceSwitch level is set to Verbose.
If generalSwitch.TraceVerbose Then
Trace.WriteLine(myObject, category)
End If
End Sub
설명
기본적으로 출력은 의 DefaultTraceListenerinstance 기록됩니다.
매개 변수를 category
사용하여 출력 메시지를 그룹화할 수 있습니다.
이 메서드는 WriteLine 추적 수신기의 메서드를 호출합니다.
추가 정보
적용 대상
WriteLine(String, String)
- Source:
- Trace.cs
- Source:
- Trace.cs
- Source:
- Trace.cs
Listeners 컬렉션의 추적 수신기에 범주 이름 및 메시지를 씁니다.
public:
static void WriteLine(System::String ^ message, System::String ^ category);
[System.Diagnostics.Conditional("TRACE")]
public static void WriteLine (string? message, string? category);
[System.Diagnostics.Conditional("TRACE")]
public static void WriteLine (string message, string category);
[<System.Diagnostics.Conditional("TRACE")>]
static member WriteLine : string * string -> unit
Public Shared Sub WriteLine (message As String, category As String)
매개 변수
- message
- String
쓸 메시지입니다.
- category
- String
출력을 구성하는 데 사용되는 범주 이름입니다.
- 특성
예제
다음 예제에서는 라는 를 TraceSwitchgeneralSwitch
만듭니다. 이 스위치는 코드 샘플 외부에서 설정됩니다.
스위치가 이상으로 설정된 TraceLevelError
경우 예제에서는 첫 번째 오류 메시지를 에 Listeners출력합니다. 컬렉션에 수신기를 추가하는 방법에 Listeners 대한 자세한 내용은 클래스를 참조하세요 TraceListenerCollection .
그런 다음 가 TraceLevel 로 Verbose
설정된 경우 예제에서는 두 번째 오류 메시지와 를 첫 번째 메시지와 category
동일한 줄에 출력합니다. 두 번째 메시지 뒤에 줄 종결자가 표시됩니다.
// Class-level declaration.
// Create a TraceSwitch.
private:
static TraceSwitch^ generalSwitch =
gcnew TraceSwitch( "General", "Entire Application" );
public:
static void MyErrorMethod( String^ category )
{
#if defined(TRACE)
// Write the message if the TraceSwitch level
// is set to Error or higher.
if ( generalSwitch->TraceError )
{
Trace::Write( "My error message. " );
}
// Write a second message if the TraceSwitch level
// is set to Verbose.
if ( generalSwitch->TraceVerbose )
{
Trace::WriteLine( "My second error message.", category );
}
#endif
}
// Class-level declaration.
// Create a TraceSwitch.
static TraceSwitch generalSwitch = new TraceSwitch("General", "Entire Application");
static public void MyErrorMethod(string category) {
// Write the message if the TraceSwitch level is set to Error or higher.
if(generalSwitch.TraceError)
Trace.Write("My error message. ");
// Write a second message if the TraceSwitch level is set to Verbose.
if(generalSwitch.TraceVerbose)
Trace.WriteLine("My second error message.", category);
}
' Class-level declaration.
' Create a TraceSwitch.
Private Shared generalSwitch As New TraceSwitch("General", "Entire Application")
Public Shared Sub MyErrorMethod(category As String)
' Write the message if the TraceSwitch level is set to Error or higher.
If generalSwitch.TraceError Then
Trace.Write("My error message. ")
End If
' Write a second message if the TraceSwitch level is set to Verbose.
If generalSwitch.TraceVerbose Then
Trace.WriteLine("My second error message.", category)
End If
End Sub
설명
기본적으로 출력은 의 DefaultTraceListenerinstance 기록됩니다.
매개 변수를 category
사용하여 출력 메시지를 그룹화할 수 있습니다.
이 메서드는 WriteLine 추적 수신기의 메서드를 호출합니다.
추가 정보
적용 대상
.NET
피드백
https://aka.ms/ContentUserFeedback
출시 예정: 2024년 내내 콘텐츠에 대한 피드백 메커니즘으로 GitHub 문제를 단계적으로 폐지하고 이를 새로운 피드백 시스템으로 바꿀 예정입니다. 자세한 내용은 다음을 참조하세요.다음에 대한 사용자 의견 제출 및 보기