EN
このコンテンツは設定された言語で表示できません。英語版のページが表示されます。

Verify Sensor Orientation - 3D Inclinometer (System)

Based on the guidance in Integrating Motion and Orientation Sensors, the inclinometer implementation can use data from the accelerometer, gyroscope and compass to determine the Euler angle values.

Most inclinometer implementations use data from the 3D magnetometer, the accelerometer and the gyroscope to calculate the current direction that the system is facing relative to the magnetic north pole. Therefore, if the magnetometer, gyroscope or accelerometer sensor is not functioning properly, you should expect to see the inclinometer return incorrect headings.

Test details

 

Associated requirements

System.Client.Sensor.Integrated

See the system hardware requirements.

Platforms

Windows RT (ARM-based)
Windows 8 (x64)
Windows 8 (x86)
Windows RT 8.1
Windows 8.1 x64
Windows 8.1 x86

Expected run time

~2 minutes

Categories

Certification
Functional

Type

Manual

Running the test

Before you run the test, complete the test setup as described in the test requirements: System Client Testing Prerequisites.

The tests will allow for angle errors of +/- 10 degrees.

See the Validation of Euler Angles section of the Integrating Motion and Orientation Sensors whitepaper for the expected angles for each of the inclinometer tests.

Troubleshooting

For troubleshooting information, see Troubleshooting System Client Testing.

表示:
© 2015 Microsoft