TypeBuilder Classe

Definizione

public ref class TypeBuilder sealed : Type

public ref class TypeBuilder sealed : System::Reflection::TypeInfo

public ref class TypeBuilder abstract : System::Reflection::TypeInfo

public ref class TypeBuilder sealed : Type, System::Runtime::InteropServices::_TypeBuilder

public ref class TypeBuilder sealed : System::Reflection::TypeInfo, System::Runtime::InteropServices::_TypeBuilder

public sealed class TypeBuilder : Type

public sealed class TypeBuilder : System.Reflection.TypeInfo

public abstract class TypeBuilder : System.Reflection.TypeInfo

[System.Runtime.InteropServices.ClassInterface(System.Runtime.InteropServices.ClassInterfaceType.None)]
public sealed class TypeBuilder : Type, System.Runtime.InteropServices._TypeBuilder

[System.Runtime.InteropServices.ClassInterface(System.Runtime.InteropServices.ClassInterfaceType.None)]
[System.Runtime.InteropServices.ComVisible(true)]
public sealed class TypeBuilder : Type, System.Runtime.InteropServices._TypeBuilder

[System.Runtime.InteropServices.ClassInterface(System.Runtime.InteropServices.ClassInterfaceType.None)]
[System.Runtime.InteropServices.ComVisible(true)]
public sealed class TypeBuilder : System.Reflection.TypeInfo, System.Runtime.InteropServices._TypeBuilder

type TypeBuilder = class
    inherit Type

type TypeBuilder = class
    inherit TypeInfo

[<System.Runtime.InteropServices.ClassInterface(System.Runtime.InteropServices.ClassInterfaceType.None)>]
type TypeBuilder = class
    inherit Type
    interface _TypeBuilder

[<System.Runtime.InteropServices.ClassInterface(System.Runtime.InteropServices.ClassInterfaceType.None)>]
[<System.Runtime.InteropServices.ComVisible(true)>]
type TypeBuilder = class
    inherit Type
    interface _TypeBuilder

[<System.Runtime.InteropServices.ClassInterface(System.Runtime.InteropServices.ClassInterfaceType.None)>]
[<System.Runtime.InteropServices.ComVisible(true)>]
type TypeBuilder = class
    inherit TypeInfo
    interface _TypeBuilder

Public NotInheritable Class TypeBuilder
Inherits Type

Public NotInheritable Class TypeBuilder
Inherits TypeInfo

Public MustInherit Class TypeBuilder
Inherits TypeInfo

Public NotInheritable Class TypeBuilder
Inherits Type
Implements _TypeBuilder

Public NotInheritable Class TypeBuilder
Inherits TypeInfo
Implements _TypeBuilder

Ereditarietà

Object

MemberInfo

Type

TypeBuilder

Ereditarietà

Object

MemberInfo

TypeInfo

TypeBuilder

Ereditarietà

Object

MemberInfo

Type

TypeInfo

TypeBuilder

Attributi

ClassInterfaceAttribute ComVisibleAttribute

Implementazioni

_TypeBuilder

Esempio

Nell'esempio di codice seguente viene illustrato come definire e usare un assembly dinamico. L'assembly di esempio contiene un tipo, MyDynamicType, che ha un campo privato, una proprietà che ottiene e imposta il campo privato, i costruttori che inizializzano il campo privato e un metodo che moltiplica un numero fornito dall'utente in base al valore del campo privato e restituisce il risultato.

using namespace System;
using namespace System::Reflection;
using namespace System::Reflection::Emit;

void main()
{
    // This code creates an assembly that contains one type,
    // named "MyDynamicType", that has a private field, a property
    // that gets and sets the private field, constructors that
    // initialize the private field, and a method that multiplies
    // a user-supplied number by the private field value and returns
    // the result. In Visual C++ the type might look like this:
    /*
      public ref class MyDynamicType
      {
      private:
          int m_number;

      public:
          MyDynamicType() : m_number(42) {};
          MyDynamicType(int initNumber) : m_number(initNumber) {};
      
          property int Number
          {
              int get() { return m_number; }
              void set(int value) { m_number = value; }
          }

          int MyMethod(int multiplier)
          {
              return m_number * multiplier;
          }
      };
    */
      
    AssemblyName^ aName = gcnew AssemblyName("DynamicAssemblyExample");
    AssemblyBuilder^ ab = 
        AssemblyBuilder::DefineDynamicAssembly(
            aName, 
            AssemblyBuilderAccess::Run);

    // The module name is usually the same as the assembly name
    ModuleBuilder^ mb = 
        ab->DefineDynamicModule(aName->Name);
      
    TypeBuilder^ tb = mb->DefineType(
        "MyDynamicType", 
         TypeAttributes::Public);

    // Add a private field of type int (Int32).
    FieldBuilder^ fbNumber = tb->DefineField(
        "m_number", 
        int::typeid, 
        FieldAttributes::Private);

    // Define a constructor that takes an integer argument and 
    // stores it in the private field. 
    array<Type^>^ parameterTypes = { int::typeid };
    ConstructorBuilder^ ctor1 = tb->DefineConstructor(
        MethodAttributes::Public, 
        CallingConventions::Standard, 
        parameterTypes);

    ILGenerator^ ctor1IL = ctor1->GetILGenerator();
    // For a constructor, argument zero is a reference to the new
    // instance. Push it on the stack before calling the base
    // class constructor. Specify the default constructor of the 
    // base class (System::Object) by passing an empty array of 
    // types (Type::EmptyTypes) to GetConstructor.
    ctor1IL->Emit(OpCodes::Ldarg_0);
    ctor1IL->Emit(OpCodes::Call, 
        Object::typeid->GetConstructor(Type::EmptyTypes));
    // Push the instance on the stack before pushing the argument
    // that is to be assigned to the private field m_number.
    ctor1IL->Emit(OpCodes::Ldarg_0);
    ctor1IL->Emit(OpCodes::Ldarg_1);
    ctor1IL->Emit(OpCodes::Stfld, fbNumber);
    ctor1IL->Emit(OpCodes::Ret);

    // Define a default constructor that supplies a default value
    // for the private field. For parameter types, pass the empty
    // array of types or pass nullptr.
    ConstructorBuilder^ ctor0 = tb->DefineConstructor(
        MethodAttributes::Public, 
        CallingConventions::Standard, 
        Type::EmptyTypes);

    ILGenerator^ ctor0IL = ctor0->GetILGenerator();
    ctor0IL->Emit(OpCodes::Ldarg_0);
    ctor0IL->Emit(OpCodes::Call, 
        Object::typeid->GetConstructor(Type::EmptyTypes));
    // For a constructor, argument zero is a reference to the new
    // instance. Push it on the stack before pushing the default
    // value on the stack.
    ctor0IL->Emit(OpCodes::Ldarg_0);
    ctor0IL->Emit(OpCodes::Ldc_I4_S, 42);
    ctor0IL->Emit(OpCodes::Stfld, fbNumber);
    ctor0IL->Emit(OpCodes::Ret);

    // Define a property named Number that gets and sets the private 
    // field.
    //
    // The last argument of DefineProperty is nullptr, because the
    // property has no parameters. (If you don't specify nullptr, you must
    // specify an array of Type objects. For a parameterless property,
    // use the built-in array with no elements: Type::EmptyTypes)
    PropertyBuilder^ pbNumber = tb->DefineProperty(
        "Number", 
        PropertyAttributes::HasDefault, 
        int::typeid, 
        nullptr);
      
    // The property "set" and property "get" methods require a special
    // set of attributes.
    MethodAttributes getSetAttr = MethodAttributes::Public | 
        MethodAttributes::SpecialName | MethodAttributes::HideBySig;

    // Define the "get" accessor method for Number. The method returns
    // an integer and has no arguments. (Note that nullptr could be 
    // used instead of Types::EmptyTypes)
    MethodBuilder^ mbNumberGetAccessor = tb->DefineMethod(
        "get_Number", 
        getSetAttr, 
        int::typeid, 
        Type::EmptyTypes);
      
    ILGenerator^ numberGetIL = mbNumberGetAccessor->GetILGenerator();
    // For an instance property, argument zero is the instance. Load the 
    // instance, then load the private field and return, leaving the
    // field value on the stack.
    numberGetIL->Emit(OpCodes::Ldarg_0);
    numberGetIL->Emit(OpCodes::Ldfld, fbNumber);
    numberGetIL->Emit(OpCodes::Ret);
    
    // Define the "set" accessor method for Number, which has no return
    // type and takes one argument of type int (Int32).
    MethodBuilder^ mbNumberSetAccessor = tb->DefineMethod(
        "set_Number", 
        getSetAttr, 
        nullptr, 
        gcnew array<Type^> { int::typeid });
      
    ILGenerator^ numberSetIL = mbNumberSetAccessor->GetILGenerator();
    // Load the instance and then the numeric argument, then store the
    // argument in the field.
    numberSetIL->Emit(OpCodes::Ldarg_0);
    numberSetIL->Emit(OpCodes::Ldarg_1);
    numberSetIL->Emit(OpCodes::Stfld, fbNumber);
    numberSetIL->Emit(OpCodes::Ret);
      
    // Last, map the "get" and "set" accessor methods to the 
    // PropertyBuilder. The property is now complete. 
    pbNumber->SetGetMethod(mbNumberGetAccessor);
    pbNumber->SetSetMethod(mbNumberSetAccessor);

    // Define a method that accepts an integer argument and returns
    // the product of that integer and the private field m_number. This
    // time, the array of parameter types is created on the fly.
    MethodBuilder^ meth = tb->DefineMethod(
        "MyMethod", 
        MethodAttributes::Public, 
        int::typeid, 
        gcnew array<Type^> { int::typeid });

    ILGenerator^ methIL = meth->GetILGenerator();
    // To retrieve the private instance field, load the instance it
    // belongs to (argument zero). After loading the field, load the 
    // argument one and then multiply. Return from the method with 
    // the return value (the product of the two numbers) on the 
    // execution stack.
    methIL->Emit(OpCodes::Ldarg_0);
    methIL->Emit(OpCodes::Ldfld, fbNumber);
    methIL->Emit(OpCodes::Ldarg_1);
    methIL->Emit(OpCodes::Mul);
    methIL->Emit(OpCodes::Ret);

    // Finish the type->
    Type^ t = tb->CreateType();

    // Because AssemblyBuilderAccess includes Run, the code can be
    // executed immediately. Start by getting reflection objects for
    // the method and the property.
    MethodInfo^ mi = t->GetMethod("MyMethod");
    PropertyInfo^ pi = t->GetProperty("Number");
  
    // Create an instance of MyDynamicType using the default 
    // constructor. 
    Object^ o1 = Activator::CreateInstance(t);

    // Display the value of the property, then change it to 127 and 
    // display it again. Use nullptr to indicate that the property
    // has no index.
    Console::WriteLine("o1->Number: {0}", pi->GetValue(o1, nullptr));
    pi->SetValue(o1, 127, nullptr);
    Console::WriteLine("o1->Number: {0}", pi->GetValue(o1, nullptr));

    // Call MyMethod, passing 22, and display the return value, 22
    // times 127. Arguments must be passed as an array, even when
    // there is only one.
    array<Object^>^ arguments = { 22 };
    Console::WriteLine("o1->MyMethod(22): {0}", 
        mi->Invoke(o1, arguments));

    // Create an instance of MyDynamicType using the constructor
    // that specifies m_Number. The constructor is identified by
    // matching the types in the argument array. In this case, 
    // the argument array is created on the fly. Display the 
    // property value.
    Object^ o2 = Activator::CreateInstance(t, 
        gcnew array<Object^> { 5280 });
    Console::WriteLine("o2->Number: {0}", pi->GetValue(o2, nullptr));
};

/* This code produces the following output:

o1->Number: 42
o1->Number: 127
o1->MyMethod(22): 2794
o2->Number: 5280
 */

using System;
using System.Reflection;
using System.Reflection.Emit;

class DemoAssemblyBuilder
{
    public static void Main()
    {
        // This code creates an assembly that contains one type,
        // named "MyDynamicType", that has a private field, a property
        // that gets and sets the private field, constructors that
        // initialize the private field, and a method that multiplies
        // a user-supplied number by the private field value and returns
        // the result. In C# the type might look like this:
        /*
        public class MyDynamicType
        {
            private int m_number;

            public MyDynamicType() : this(42) {}
            public MyDynamicType(int initNumber)
            {
                m_number = initNumber;
            }

            public int Number
            {
                get { return m_number; }
                set { m_number = value; }
            }

            public int MyMethod(int multiplier)
            {
                return m_number * multiplier;
            }
        }
        */

        var aName = new AssemblyName("DynamicAssemblyExample");
        AssemblyBuilder ab =
            AssemblyBuilder.DefineDynamicAssembly(
                aName,
                AssemblyBuilderAccess.Run);

        // The module name is usually the same as the assembly name.
        ModuleBuilder mb = ab.DefineDynamicModule(aName.Name ?? "DynamicAssemblyExample");

        TypeBuilder tb = mb.DefineType(
            "MyDynamicType",
             TypeAttributes.Public);

        // Add a private field of type int (Int32).
        FieldBuilder fbNumber = tb.DefineField(
            "m_number",
            typeof(int),
            FieldAttributes.Private);

        // Define a constructor that takes an integer argument and
        // stores it in the private field.
        Type[] parameterTypes = { typeof(int) };
        ConstructorBuilder ctor1 = tb.DefineConstructor(
            MethodAttributes.Public,
            CallingConventions.Standard,
            parameterTypes);

        ILGenerator ctor1IL = ctor1.GetILGenerator();
        // For a constructor, argument zero is a reference to the new
        // instance. Push it on the stack before calling the base
        // class constructor. Specify the default constructor of the
        // base class (System.Object) by passing an empty array of
        // types (Type.EmptyTypes) to GetConstructor.
        ctor1IL.Emit(OpCodes.Ldarg_0);
        ConstructorInfo? ci = typeof(object).GetConstructor(Type.EmptyTypes);
        ctor1IL.Emit(OpCodes.Call, ci!);
        // Push the instance on the stack before pushing the argument
        // that is to be assigned to the private field m_number.
        ctor1IL.Emit(OpCodes.Ldarg_0);
        ctor1IL.Emit(OpCodes.Ldarg_1);
        ctor1IL.Emit(OpCodes.Stfld, fbNumber);
        ctor1IL.Emit(OpCodes.Ret);

        // Define a default constructor that supplies a default value
        // for the private field. For parameter types, pass the empty
        // array of types or pass null.
        ConstructorBuilder ctor0 = tb.DefineConstructor(
            MethodAttributes.Public,
            CallingConventions.Standard,
            Type.EmptyTypes);

        ILGenerator ctor0IL = ctor0.GetILGenerator();
        // For a constructor, argument zero is a reference to the new
        // instance. Push it on the stack before pushing the default
        // value on the stack, then call constructor ctor1.
        ctor0IL.Emit(OpCodes.Ldarg_0);
        ctor0IL.Emit(OpCodes.Ldc_I4_S, 42);
        ctor0IL.Emit(OpCodes.Call, ctor1);
        ctor0IL.Emit(OpCodes.Ret);

        // Define a property named Number that gets and sets the private
        // field.
        //
        // The last argument of DefineProperty is null, because the
        // property has no parameters. (If you don't specify null, you must
        // specify an array of Type objects. For a parameterless property,
        // use the built-in array with no elements: Type.EmptyTypes)
        PropertyBuilder pbNumber = tb.DefineProperty(
            "Number",
            PropertyAttributes.HasDefault,
            typeof(int),
            null);

        // The property "set" and property "get" methods require a special
        // set of attributes.
        MethodAttributes getSetAttr = MethodAttributes.Public |
            MethodAttributes.SpecialName | MethodAttributes.HideBySig;

        // Define the "get" accessor method for Number. The method returns
        // an integer and has no arguments. (Note that null could be
        // used instead of Types.EmptyTypes)
        MethodBuilder mbNumberGetAccessor = tb.DefineMethod(
            "get_Number",
            getSetAttr,
            typeof(int),
            Type.EmptyTypes);

        ILGenerator numberGetIL = mbNumberGetAccessor.GetILGenerator();
        // For an instance property, argument zero is the instance. Load the
        // instance, then load the private field and return, leaving the
        // field value on the stack.
        numberGetIL.Emit(OpCodes.Ldarg_0);
        numberGetIL.Emit(OpCodes.Ldfld, fbNumber);
        numberGetIL.Emit(OpCodes.Ret);

        // Define the "set" accessor method for Number, which has no return
        // type and takes one argument of type int (Int32).
        MethodBuilder mbNumberSetAccessor = tb.DefineMethod(
            "set_Number",
            getSetAttr,
            null,
            new Type[] { typeof(int) });

        ILGenerator numberSetIL = mbNumberSetAccessor.GetILGenerator();
        // Load the instance and then the numeric argument, then store the
        // argument in the field.
        numberSetIL.Emit(OpCodes.Ldarg_0);
        numberSetIL.Emit(OpCodes.Ldarg_1);
        numberSetIL.Emit(OpCodes.Stfld, fbNumber);
        numberSetIL.Emit(OpCodes.Ret);

        // Last, map the "get" and "set" accessor methods to the
        // PropertyBuilder. The property is now complete.
        pbNumber.SetGetMethod(mbNumberGetAccessor);
        pbNumber.SetSetMethod(mbNumberSetAccessor);

        // Define a method that accepts an integer argument and returns
        // the product of that integer and the private field m_number. This
        // time, the array of parameter types is created on the fly.
        MethodBuilder meth = tb.DefineMethod(
            "MyMethod",
            MethodAttributes.Public,
            typeof(int),
            new Type[] { typeof(int) });

        ILGenerator methIL = meth.GetILGenerator();
        // To retrieve the private instance field, load the instance it
        // belongs to (argument zero). After loading the field, load the
        // argument one and then multiply. Return from the method with
        // the return value (the product of the two numbers) on the
        // execution stack.
        methIL.Emit(OpCodes.Ldarg_0);
        methIL.Emit(OpCodes.Ldfld, fbNumber);
        methIL.Emit(OpCodes.Ldarg_1);
        methIL.Emit(OpCodes.Mul);
        methIL.Emit(OpCodes.Ret);

        // Finish the type.
        Type? t = tb.CreateType();

        // Because AssemblyBuilderAccess includes Run, the code can be
        // executed immediately. Start by getting reflection objects for
        // the method and the property.
        MethodInfo? mi = t?.GetMethod("MyMethod");
        PropertyInfo? pi = t?.GetProperty("Number");

        // Create an instance of MyDynamicType using the default
        // constructor.
        object? o1 = null;
        if (t is not null)
            o1 = Activator.CreateInstance(t);

        // Display the value of the property, then change it to 127 and
        // display it again. Use null to indicate that the property
        // has no index.
        Console.WriteLine("o1.Number: {0}", pi?.GetValue(o1, null));
        pi?.SetValue(o1, 127, null);
        Console.WriteLine("o1.Number: {0}", pi?.GetValue(o1, null));

        // Call MyMethod, passing 22, and display the return value, 22
        // times 127. Arguments must be passed as an array, even when
        // there is only one.
        object[] arguments = { 22 };
        Console.WriteLine("o1.MyMethod(22): {0}",
            mi?.Invoke(o1, arguments));

        // Create an instance of MyDynamicType using the constructor
        // that specifies m_Number. The constructor is identified by
        // matching the types in the argument array. In this case,
        // the argument array is created on the fly. Display the
        // property value.
        object? o2 = null;
        if (t is not null)
            Activator.CreateInstance(t, new object[] { 5280 });
        Console.WriteLine("o2.Number: {0}", pi?.GetValue(o2, null));
    }
}

/* This code produces the following output:

o1.Number: 42
o1.Number: 127
o1.MyMethod(22): 2794
o2.Number: 5280
 */

Imports System.Reflection
Imports System.Reflection.Emit

Class DemoAssemblyBuilder

    Public Shared Sub Main()

        ' This code creates an assembly that contains one type,
        ' named "MyDynamicType", that has a private field, a property
        ' that gets and sets the private field, constructors that
        ' initialize the private field, and a method that multiplies
        ' a user-supplied number by the private field value and returns
        ' the result. The code might look like this in Visual Basic:
        '
        'Public Class MyDynamicType
        '    Private m_number As Integer
        '
        '    Public Sub New()
        '        Me.New(42)
        '    End Sub
        '
        '    Public Sub New(ByVal initNumber As Integer)
        '        m_number = initNumber
        '    End Sub
        '
        '    Public Property Number As Integer
        '        Get
        '            Return m_number
        '        End Get
        '        Set
        '            m_Number = Value
        '        End Set
        '    End Property
        '
        '    Public Function MyMethod(ByVal multiplier As Integer) As Integer
        '        Return m_Number * multiplier
        '    End Function
        'End Class
      
        Dim aName As New AssemblyName("DynamicAssemblyExample")
        Dim ab As AssemblyBuilder = _
            AssemblyBuilder.DefineDynamicAssembly( _
                aName, _
                AssemblyBuilderAccess.Run)

        ' The module name is usually the same as the assembly name.
        Dim mb As ModuleBuilder = ab.DefineDynamicModule( _
            aName.Name)
      
        Dim tb As TypeBuilder = _
            mb.DefineType("MyDynamicType", TypeAttributes.Public)

        ' Add a private field of type Integer (Int32).
        Dim fbNumber As FieldBuilder = tb.DefineField( _
            "m_number", _
            GetType(Integer), _
            FieldAttributes.Private)

        ' Define a constructor that takes an integer argument and 
        ' stores it in the private field. 
        Dim parameterTypes() As Type = { GetType(Integer) }
        Dim ctor1 As ConstructorBuilder = _
            tb.DefineConstructor( _
                MethodAttributes.Public, _
                CallingConventions.Standard, _
                parameterTypes)

        Dim ctor1IL As ILGenerator = ctor1.GetILGenerator()
        ' For a constructor, argument zero is a reference to the new
        ' instance. Push it on the stack before calling the base
        ' class constructor. Specify the default constructor of the 
        ' base class (System.Object) by passing an empty array of 
        ' types (Type.EmptyTypes) to GetConstructor.
        ctor1IL.Emit(OpCodes.Ldarg_0)
        ctor1IL.Emit(OpCodes.Call, _
            GetType(Object).GetConstructor(Type.EmptyTypes))
        ' Push the instance on the stack before pushing the argument
        ' that is to be assigned to the private field m_number.
        ctor1IL.Emit(OpCodes.Ldarg_0)
        ctor1IL.Emit(OpCodes.Ldarg_1)
        ctor1IL.Emit(OpCodes.Stfld, fbNumber)
        ctor1IL.Emit(OpCodes.Ret)

        ' Define a default constructor that supplies a default value
        ' for the private field. For parameter types, pass the empty
        ' array of types or pass Nothing.
        Dim ctor0 As ConstructorBuilder = tb.DefineConstructor( _
            MethodAttributes.Public, _
            CallingConventions.Standard, _
            Type.EmptyTypes)

        Dim ctor0IL As ILGenerator = ctor0.GetILGenerator()
        ' For a constructor, argument zero is a reference to the new
        ' instance. Push it on the stack before pushing the default
        ' value on the stack, then call constructor ctor1.
        ctor0IL.Emit(OpCodes.Ldarg_0)
        ctor0IL.Emit(OpCodes.Ldc_I4_S, 42)
        ctor0IL.Emit(OpCodes.Call, ctor1)
        ctor0IL.Emit(OpCodes.Ret)

        ' Define a property named Number that gets and sets the private 
        ' field.
        '
        ' The last argument of DefineProperty is Nothing, because the
        ' property has no parameters. (If you don't specify Nothing, you must
        ' specify an array of Type objects. For a parameterless property,
        ' use the built-in array with no elements: Type.EmptyTypes)
        Dim pbNumber As PropertyBuilder = tb.DefineProperty( _
            "Number", _
            PropertyAttributes.HasDefault, _
            GetType(Integer), _
            Nothing)
      
        ' The property Set and property Get methods require a special
        ' set of attributes.
        Dim getSetAttr As MethodAttributes = _
            MethodAttributes.Public Or MethodAttributes.SpecialName _
                Or MethodAttributes.HideBySig

        ' Define the "get" accessor method for Number. The method returns
        ' an integer and has no arguments. (Note that Nothing could be 
        ' used instead of Types.EmptyTypes)
        Dim mbNumberGetAccessor As MethodBuilder = tb.DefineMethod( _
            "get_Number", _
            getSetAttr, _
            GetType(Integer), _
            Type.EmptyTypes)
      
        Dim numberGetIL As ILGenerator = mbNumberGetAccessor.GetILGenerator()
        ' For an instance property, argument zero is the instance. Load the 
        ' instance, then load the private field and return, leaving the
        ' field value on the stack.
        numberGetIL.Emit(OpCodes.Ldarg_0)
        numberGetIL.Emit(OpCodes.Ldfld, fbNumber)
        numberGetIL.Emit(OpCodes.Ret)
        
        ' Define the "set" accessor method for Number, which has no return
        ' type and takes one argument of type Integer (Int32).
        Dim mbNumberSetAccessor As MethodBuilder = _
            tb.DefineMethod( _
                "set_Number", _
                getSetAttr, _
                Nothing, _
                New Type() { GetType(Integer) })
      
        Dim numberSetIL As ILGenerator = mbNumberSetAccessor.GetILGenerator()
        ' Load the instance and then the numeric argument, then store the
        ' argument in the field.
        numberSetIL.Emit(OpCodes.Ldarg_0)
        numberSetIL.Emit(OpCodes.Ldarg_1)
        numberSetIL.Emit(OpCodes.Stfld, fbNumber)
        numberSetIL.Emit(OpCodes.Ret)
      
        ' Last, map the "get" and "set" accessor methods to the 
        ' PropertyBuilder. The property is now complete. 
        pbNumber.SetGetMethod(mbNumberGetAccessor)
        pbNumber.SetSetMethod(mbNumberSetAccessor)

        ' Define a method that accepts an integer argument and returns
        ' the product of that integer and the private field m_number. This
        ' time, the array of parameter types is created on the fly.
        Dim meth As MethodBuilder = tb.DefineMethod( _
            "MyMethod", _
            MethodAttributes.Public, _
            GetType(Integer), _
            New Type() { GetType(Integer) })

        Dim methIL As ILGenerator = meth.GetILGenerator()
        ' To retrieve the private instance field, load the instance it
        ' belongs to (argument zero). After loading the field, load the 
        ' argument one and then multiply. Return from the method with 
        ' the return value (the product of the two numbers) on the 
        ' execution stack.
        methIL.Emit(OpCodes.Ldarg_0)
        methIL.Emit(OpCodes.Ldfld, fbNumber)
        methIL.Emit(OpCodes.Ldarg_1)
        methIL.Emit(OpCodes.Mul)
        methIL.Emit(OpCodes.Ret)

        ' Finish the type.
        Dim t As Type = tb.CreateType()

        ' Because AssemblyBuilderAccess includes Run, the code can be
        ' executed immediately. Start by getting reflection objects for
        ' the method and the property.
        Dim mi As MethodInfo = t.GetMethod("MyMethod")
        Dim pi As PropertyInfo = t.GetProperty("Number")
  
        ' Create an instance of MyDynamicType using the default 
        ' constructor. 
        Dim o1 As Object = Activator.CreateInstance(t)

        ' Display the value of the property, then change it to 127 and 
        ' display it again. Use Nothing to indicate that the property
        ' has no index.
        Console.WriteLine("o1.Number: {0}", pi.GetValue(o1, Nothing))
        pi.SetValue(o1, 127, Nothing)
        Console.WriteLine("o1.Number: {0}", pi.GetValue(o1, Nothing))

        ' Call MyMethod, passing 22, and display the return value, 22
        ' times 127. Arguments must be passed as an array, even when
        ' there is only one.
        Dim arguments() As Object = { 22 }
        Console.WriteLine("o1.MyMethod(22): {0}", _
            mi.Invoke(o1, arguments))

        ' Create an instance of MyDynamicType using the constructor
        ' that specifies m_Number. The constructor is identified by
        ' matching the types in the argument array. In this case, 
        ' the argument array is created on the fly. Display the 
        ' property value.
        Dim o2 As Object = Activator.CreateInstance(t, _
            New Object() { 5280 })
        Console.WriteLine("o2.Number: {0}", pi.GetValue(o2, Nothing))
      
    End Sub  
End Class

' This code produces the following output:
'
'o1.Number: 42
'o1.Number: 127
'o1.MyMethod(22): 2794
'o2.Number: 5280

Nell'esempio di codice seguente viene illustrato come compilare un tipo in modo dinamico usando TypeBuilder.

using namespace System;
using namespace System::Threading;
using namespace System::Reflection;
using namespace System::Reflection::Emit;
Type^ DynamicDotProductGen()
{
   Type^ ivType = nullptr;
   array<Type^>^temp0 = {int::typeid,int::typeid,int::typeid};
   array<Type^>^ctorParams = temp0;
   AppDomain^ myDomain = Thread::GetDomain();
   AssemblyName^ myAsmName = gcnew AssemblyName;
   myAsmName->Name = "IntVectorAsm";
   AssemblyBuilder^ myAsmBuilder = myDomain->DefineDynamicAssembly( myAsmName, AssemblyBuilderAccess::RunAndSave );
   ModuleBuilder^ IntVectorModule = myAsmBuilder->DefineDynamicModule( "IntVectorModule", "Vector.dll" );
   TypeBuilder^ ivTypeBld = IntVectorModule->DefineType( "IntVector", TypeAttributes::Public );
   FieldBuilder^ xField = ivTypeBld->DefineField( "x", int::typeid, FieldAttributes::Private );
   FieldBuilder^ yField = ivTypeBld->DefineField( "y", int::typeid, FieldAttributes::Private );
   FieldBuilder^ zField = ivTypeBld->DefineField( "z", int::typeid, FieldAttributes::Private );
   Type^ objType = Type::GetType( "System.Object" );
   ConstructorInfo^ objCtor = objType->GetConstructor( gcnew array<Type^>(0) );
   ConstructorBuilder^ ivCtor = ivTypeBld->DefineConstructor( MethodAttributes::Public, CallingConventions::Standard, ctorParams );
   ILGenerator^ ctorIL = ivCtor->GetILGenerator();
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Call, objCtor );
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Ldarg_1 );
   ctorIL->Emit( OpCodes::Stfld, xField );
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Ldarg_2 );
   ctorIL->Emit( OpCodes::Stfld, yField );
   ctorIL->Emit( OpCodes::Ldarg_0 );
   ctorIL->Emit( OpCodes::Ldarg_3 );
   ctorIL->Emit( OpCodes::Stfld, zField );
   ctorIL->Emit( OpCodes::Ret );
   
   // This method will find the dot product of the stored vector
   // with another.
   array<Type^>^temp1 = {ivTypeBld};
   array<Type^>^dpParams = temp1;
   
   // Here, you create a MethodBuilder containing the
   // name, the attributes (public, static, private, and so on),
   // the return type (int, in this case), and a array of Type
   // indicating the type of each parameter. Since the sole parameter
   // is a IntVector, the very class you're creating, you will
   // pass in the TypeBuilder (which is derived from Type) instead of
   // a Type object for IntVector, avoiding an exception.
   // -- This method would be declared in C# as:
   //    public int DotProduct(IntVector aVector)
   MethodBuilder^ dotProductMthd = ivTypeBld->DefineMethod( "DotProduct", MethodAttributes::Public, int::typeid, dpParams );
   
   // A ILGenerator can now be spawned, attached to the MethodBuilder.
   ILGenerator^ mthdIL = dotProductMthd->GetILGenerator();
   
   // Here's the body of our function, in MSIL form. We're going to find the
   // "dot product" of the current vector instance with the passed vector
   // instance. For reference purposes, the equation is:
   // (x1 * x2) + (y1 * y2) + (z1 * z2) = the dot product
   // First, you'll load the reference to the current instance "this"
   // stored in argument 0 (ldarg.0) onto the stack. Ldfld, the subsequent
   // instruction, will pop the reference off the stack and look up the
   // field "x", specified by the FieldInfo token "xField".
   mthdIL->Emit( OpCodes::Ldarg_0 );
   mthdIL->Emit( OpCodes::Ldfld, xField );
   
   // That completed, the value stored at field "x" is now atop the stack.
   // Now, you'll do the same for the Object reference we passed as a
   // parameter, stored in argument 1 (ldarg.1). After Ldfld executed,
   // you'll have the value stored in field "x" for the passed instance
   // atop the stack.
   mthdIL->Emit( OpCodes::Ldarg_1 );
   mthdIL->Emit( OpCodes::Ldfld, xField );
   
   // There will now be two values atop the stack - the "x" value for the
   // current vector instance, and the "x" value for the passed instance.
   // You'll now multiply them, and push the result onto the evaluation stack.
   mthdIL->Emit( OpCodes::Mul_Ovf_Un );
   
   // Now, repeat this for the "y" fields of both vectors.
   mthdIL->Emit( OpCodes::Ldarg_0 );
   mthdIL->Emit( OpCodes::Ldfld, yField );
   mthdIL->Emit( OpCodes::Ldarg_1 );
   mthdIL->Emit( OpCodes::Ldfld, yField );
   mthdIL->Emit( OpCodes::Mul_Ovf_Un );
   
   // At this time, the results of both multiplications should be atop
   // the stack. You'll now add them and push the result onto the stack.
   mthdIL->Emit( OpCodes::Add_Ovf_Un );
   
   // Multiply both "z" field and push the result onto the stack.
   mthdIL->Emit( OpCodes::Ldarg_0 );
   mthdIL->Emit( OpCodes::Ldfld, zField );
   mthdIL->Emit( OpCodes::Ldarg_1 );
   mthdIL->Emit( OpCodes::Ldfld, zField );
   mthdIL->Emit( OpCodes::Mul_Ovf_Un );
   
   // Finally, add the result of multiplying the "z" fields with the
   // result of the earlier addition, and push the result - the dot product -
   // onto the stack.
   mthdIL->Emit( OpCodes::Add_Ovf_Un );
   
   // The "ret" opcode will pop the last value from the stack and return it
   // to the calling method. You're all done!
   mthdIL->Emit( OpCodes::Ret );
   ivType = ivTypeBld->CreateType();
   return ivType;
}

int main()
{
   Type^ IVType = nullptr;
   Object^ aVector1 = nullptr;
   Object^ aVector2 = nullptr;
   array<Type^>^temp2 = {int::typeid,int::typeid,int::typeid};
   array<Type^>^aVtypes = temp2;
   array<Object^>^temp3 = {10,10,10};
   array<Object^>^aVargs1 = temp3;
   array<Object^>^temp4 = {20,20,20};
   array<Object^>^aVargs2 = temp4;
   
   // Call the  method to build our dynamic class.
   IVType = DynamicDotProductGen();
   Console::WriteLine( "---" );
   ConstructorInfo^ myDTctor = IVType->GetConstructor( aVtypes );
   aVector1 = myDTctor->Invoke( aVargs1 );
   aVector2 = myDTctor->Invoke( aVargs2 );
   array<Object^>^passMe = gcnew array<Object^>(1);
   passMe[ 0 ] = dynamic_cast<Object^>(aVector2);
   Console::WriteLine( "(10, 10, 10) . (20, 20, 20) = {0}", IVType->InvokeMember( "DotProduct", BindingFlags::InvokeMethod, nullptr, aVector1, passMe ) );
}

// +++ OUTPUT +++
// ---
// (10, 10, 10) . (20, 20, 20) = 600

using System;
using System.Threading;
using System.Reflection;
using System.Reflection.Emit;

class TestILGenerator
{
    public static Type DynamicDotProductGen()
    {
       Type ivType = null;
       Type[] ctorParams = new Type[] { typeof(int),
                                typeof(int),
                        typeof(int)};
    
       AppDomain myDomain = Thread.GetDomain();
       AssemblyName myAsmName = new AssemblyName();
       myAsmName.Name = "IntVectorAsm";
    
       AssemblyBuilder myAsmBuilder = myDomain.DefineDynamicAssembly(
                      myAsmName,
                      AssemblyBuilderAccess.RunAndSave);

       ModuleBuilder IntVectorModule = myAsmBuilder.DefineDynamicModule("IntVectorModule",
                                        "Vector.dll");

       TypeBuilder ivTypeBld = IntVectorModule.DefineType("IntVector",
                                      TypeAttributes.Public);

       FieldBuilder xField = ivTypeBld.DefineField("x", typeof(int),
                                                       FieldAttributes.Private);
       FieldBuilder yField = ivTypeBld.DefineField("y", typeof(int),
                                                       FieldAttributes.Private);
       FieldBuilder zField = ivTypeBld.DefineField("z", typeof(int),
                                                       FieldAttributes.Private);

           Type objType = Type.GetType("System.Object");
           ConstructorInfo objCtor = objType.GetConstructor(new Type[0]);

       ConstructorBuilder ivCtor = ivTypeBld.DefineConstructor(
                      MethodAttributes.Public,
                      CallingConventions.Standard,
                      ctorParams);
       ILGenerator ctorIL = ivCtor.GetILGenerator();
           ctorIL.Emit(OpCodes.Ldarg_0);
           ctorIL.Emit(OpCodes.Call, objCtor);
           ctorIL.Emit(OpCodes.Ldarg_0);
           ctorIL.Emit(OpCodes.Ldarg_1);
           ctorIL.Emit(OpCodes.Stfld, xField);
           ctorIL.Emit(OpCodes.Ldarg_0);
           ctorIL.Emit(OpCodes.Ldarg_2);
           ctorIL.Emit(OpCodes.Stfld, yField);
           ctorIL.Emit(OpCodes.Ldarg_0);
           ctorIL.Emit(OpCodes.Ldarg_3);
           ctorIL.Emit(OpCodes.Stfld, zField);
       ctorIL.Emit(OpCodes.Ret);

       // This method will find the dot product of the stored vector
       // with another.

       Type[] dpParams = new Type[] { ivTypeBld };

           // Here, you create a MethodBuilder containing the
       // name, the attributes (public, static, private, and so on),
       // the return type (int, in this case), and a array of Type
       // indicating the type of each parameter. Since the sole parameter
       // is a IntVector, the very class you're creating, you will
       // pass in the TypeBuilder (which is derived from Type) instead of
       // a Type object for IntVector, avoiding an exception.

       // -- This method would be declared in C# as:
       //    public int DotProduct(IntVector aVector)

           MethodBuilder dotProductMthd = ivTypeBld.DefineMethod(
                                  "DotProduct",
                          MethodAttributes.Public,
                                          typeof(int),
                                          dpParams);

       // A ILGenerator can now be spawned, attached to the MethodBuilder.

       ILGenerator mthdIL = dotProductMthd.GetILGenerator();
    
       // Here's the body of our function, in MSIL form. We're going to find the
       // "dot product" of the current vector instance with the passed vector
       // instance. For reference purposes, the equation is:
       // (x1 * x2) + (y1 * y2) + (z1 * z2) = the dot product

       // First, you'll load the reference to the current instance "this"
       // stored in argument 0 (ldarg.0) onto the stack. Ldfld, the subsequent
       // instruction, will pop the reference off the stack and look up the
       // field "x", specified by the FieldInfo token "xField".

       mthdIL.Emit(OpCodes.Ldarg_0);
       mthdIL.Emit(OpCodes.Ldfld, xField);

       // That completed, the value stored at field "x" is now atop the stack.
       // Now, you'll do the same for the object reference we passed as a
       // parameter, stored in argument 1 (ldarg.1). After Ldfld executed,
       // you'll have the value stored in field "x" for the passed instance
       // atop the stack.

       mthdIL.Emit(OpCodes.Ldarg_1);
       mthdIL.Emit(OpCodes.Ldfld, xField);

           // There will now be two values atop the stack - the "x" value for the
       // current vector instance, and the "x" value for the passed instance.
       // You'll now multiply them, and push the result onto the evaluation stack.

       mthdIL.Emit(OpCodes.Mul_Ovf_Un);

       // Now, repeat this for the "y" fields of both vectors.

       mthdIL.Emit(OpCodes.Ldarg_0);
       mthdIL.Emit(OpCodes.Ldfld, yField);
       mthdIL.Emit(OpCodes.Ldarg_1);
       mthdIL.Emit(OpCodes.Ldfld, yField);
       mthdIL.Emit(OpCodes.Mul_Ovf_Un);

       // At this time, the results of both multiplications should be atop
       // the stack. You'll now add them and push the result onto the stack.

       mthdIL.Emit(OpCodes.Add_Ovf_Un);

       // Multiply both "z" field and push the result onto the stack.
       mthdIL.Emit(OpCodes.Ldarg_0);
       mthdIL.Emit(OpCodes.Ldfld, zField);
       mthdIL.Emit(OpCodes.Ldarg_1);
       mthdIL.Emit(OpCodes.Ldfld, zField);
       mthdIL.Emit(OpCodes.Mul_Ovf_Un);

       // Finally, add the result of multiplying the "z" fields with the
       // result of the earlier addition, and push the result - the dot product -
       // onto the stack.
       mthdIL.Emit(OpCodes.Add_Ovf_Un);

       // The "ret" opcode will pop the last value from the stack and return it
       // to the calling method. You're all done!

       mthdIL.Emit(OpCodes.Ret);

       ivType = ivTypeBld.CreateType();

       return ivType;
    }

    public static void Main() {
    
       Type IVType = null;
           object aVector1 = null;
           object aVector2 = null;
       Type[] aVtypes = new Type[] {typeof(int), typeof(int), typeof(int)};
           object[] aVargs1 = new object[] {10, 10, 10};
           object[] aVargs2 = new object[] {20, 20, 20};
    
       // Call the  method to build our dynamic class.

       IVType = DynamicDotProductGen();

           Console.WriteLine("---");

       ConstructorInfo myDTctor = IVType.GetConstructor(aVtypes);
       aVector1 = myDTctor.Invoke(aVargs1);
       aVector2 = myDTctor.Invoke(aVargs2);

       object[] passMe = new object[1];
           passMe[0] = (object)aVector2;

       Console.WriteLine("(10, 10, 10) . (20, 20, 20) = {0}",
                 IVType.InvokeMember("DotProduct",
                          BindingFlags.InvokeMethod,
                          null,
                          aVector1,
                          passMe));

       // +++ OUTPUT +++
       // ---
       // (10, 10, 10) . (20, 20, 20) = 600
    }
}

Imports System.Threading
Imports System.Reflection
Imports System.Reflection.Emit

 _


Class TestILGenerator
   
   
   Public Shared Function DynamicDotProductGen() As Type
      
      Dim ivType As Type = Nothing
      Dim ctorParams() As Type = {GetType(Integer), GetType(Integer), GetType(Integer)}
      
      Dim myDomain As AppDomain = Thread.GetDomain()
      Dim myAsmName As New AssemblyName()
      myAsmName.Name = "IntVectorAsm"
      
      Dim myAsmBuilder As AssemblyBuilder = myDomain.DefineDynamicAssembly( _
                        myAsmName, _
                        AssemblyBuilderAccess.RunAndSave)
      
      Dim IntVectorModule As ModuleBuilder = myAsmBuilder.DefineDynamicModule( _
                         "IntVectorModule", _
                         "Vector.dll")
      
      Dim ivTypeBld As TypeBuilder = IntVectorModule.DefineType("IntVector", TypeAttributes.Public)
      
      Dim xField As FieldBuilder = ivTypeBld.DefineField("x", _
                                 GetType(Integer), _
                                 FieldAttributes.Private)
      Dim yField As FieldBuilder = ivTypeBld.DefineField("y", _ 
                                 GetType(Integer), _
                                 FieldAttributes.Private)
      Dim zField As FieldBuilder = ivTypeBld.DefineField("z", _
                                 GetType(Integer), _
                                 FieldAttributes.Private)
      
      
      Dim objType As Type = Type.GetType("System.Object")
      Dim objCtor As ConstructorInfo = objType.GetConstructor(New Type() {})
      
      Dim ivCtor As ConstructorBuilder = ivTypeBld.DefineConstructor( _
                     MethodAttributes.Public, _
                     CallingConventions.Standard, _
                     ctorParams)
      Dim ctorIL As ILGenerator = ivCtor.GetILGenerator()
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Call, objCtor)
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Ldarg_1)
      ctorIL.Emit(OpCodes.Stfld, xField)
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Ldarg_2)
      ctorIL.Emit(OpCodes.Stfld, yField)
      ctorIL.Emit(OpCodes.Ldarg_0)
      ctorIL.Emit(OpCodes.Ldarg_3)
      ctorIL.Emit(OpCodes.Stfld, zField)
      ctorIL.Emit(OpCodes.Ret)
     

      ' Now, you'll construct the method find the dot product of two vectors. First,
      ' let's define the parameters that will be accepted by the method. In this case,
      ' it's an IntVector itself!

      Dim dpParams() As Type = {ivTypeBld}
      
      ' Here, you create a MethodBuilder containing the
      ' name, the attributes (public, static, private, and so on),
      ' the return type (int, in this case), and a array of Type
      ' indicating the type of each parameter. Since the sole parameter
      ' is a IntVector, the very class you're creating, you will
      ' pass in the TypeBuilder (which is derived from Type) instead of 
      ' a Type object for IntVector, avoiding an exception. 
      ' -- This method would be declared in VB.NET as:
      '    Public Function DotProduct(IntVector aVector) As Integer

      Dim dotProductMthd As MethodBuilder = ivTypeBld.DefineMethod("DotProduct", _
                        MethodAttributes.Public, GetType(Integer), _
                                            dpParams)
      
      ' A ILGenerator can now be spawned, attached to the MethodBuilder.
      Dim mthdIL As ILGenerator = dotProductMthd.GetILGenerator()
      
      ' Here's the body of our function, in MSIL form. We're going to find the
      ' "dot product" of the current vector instance with the passed vector 
      ' instance. For reference purposes, the equation is:
      ' (x1 * x2) + (y1 * y2) + (z1 * z2) = the dot product
      ' First, you'll load the reference to the current instance "this"
      ' stored in argument 0 (ldarg.0) onto the stack. Ldfld, the subsequent
      ' instruction, will pop the reference off the stack and look up the
      ' field "x", specified by the FieldInfo token "xField".
      mthdIL.Emit(OpCodes.Ldarg_0)
      mthdIL.Emit(OpCodes.Ldfld, xField)
      
      ' That completed, the value stored at field "x" is now atop the stack.
      ' Now, you'll do the same for the object reference we passed as a
      ' parameter, stored in argument 1 (ldarg.1). After Ldfld executed,
      ' you'll have the value stored in field "x" for the passed instance
      ' atop the stack.
      mthdIL.Emit(OpCodes.Ldarg_1)
      mthdIL.Emit(OpCodes.Ldfld, xField)
      
      ' There will now be two values atop the stack - the "x" value for the
      ' current vector instance, and the "x" value for the passed instance.
      ' You'll now multiply them, and push the result onto the evaluation stack.
      mthdIL.Emit(OpCodes.Mul_Ovf_Un)
      
      ' Now, repeat this for the "y" fields of both vectors.
      mthdIL.Emit(OpCodes.Ldarg_0)
      mthdIL.Emit(OpCodes.Ldfld, yField)
      mthdIL.Emit(OpCodes.Ldarg_1)
      mthdIL.Emit(OpCodes.Ldfld, yField)
      mthdIL.Emit(OpCodes.Mul_Ovf_Un)
      
      ' At this time, the results of both multiplications should be atop
      ' the stack. You'll now add them and push the result onto the stack.
      mthdIL.Emit(OpCodes.Add_Ovf_Un)
      
      ' Multiply both "z" field and push the result onto the stack.
      mthdIL.Emit(OpCodes.Ldarg_0)
      mthdIL.Emit(OpCodes.Ldfld, zField)
      mthdIL.Emit(OpCodes.Ldarg_1)
      mthdIL.Emit(OpCodes.Ldfld, zField)
      mthdIL.Emit(OpCodes.Mul_Ovf_Un)
      
      ' Finally, add the result of multiplying the "z" fields with the
      ' result of the earlier addition, and push the result - the dot product -
      ' onto the stack.
      mthdIL.Emit(OpCodes.Add_Ovf_Un)
      
      ' The "ret" opcode will pop the last value from the stack and return it
      ' to the calling method. You're all done!
      mthdIL.Emit(OpCodes.Ret)
      
      
      ivType = ivTypeBld.CreateType()
      
      Return ivType
   End Function 'DynamicDotProductGen
    
   
   Public Shared Sub Main()
      
      Dim IVType As Type = Nothing
      Dim aVector1 As Object = Nothing
      Dim aVector2 As Object = Nothing
      Dim aVtypes() As Type = {GetType(Integer), GetType(Integer), GetType(Integer)}
      Dim aVargs1() As Object = {10, 10, 10}
      Dim aVargs2() As Object = {20, 20, 20}
      
      ' Call the  method to build our dynamic class.
      IVType = DynamicDotProductGen()
      
      
      Dim myDTctor As ConstructorInfo = IVType.GetConstructor(aVtypes)
      aVector1 = myDTctor.Invoke(aVargs1)
      aVector2 = myDTctor.Invoke(aVargs2)
      
      Console.WriteLine("---")
      Dim passMe(0) As Object
      passMe(0) = CType(aVector2, Object)
      
      Console.WriteLine("(10, 10, 10) . (20, 20, 20) = {0}", _
                        IVType.InvokeMember("DotProduct", BindingFlags.InvokeMethod, _
                        Nothing, aVector1, passMe))
   End Sub
End Class



' +++ OUTPUT +++
' ---
' (10, 10, 10) . (20, 20, 20) = 600

Commenti

Per altre informazioni su questa API, vedere Osservazioni api supplementari per TypeBuilder.

Costruttori

Campi

Proprietà

Metodi

Implementazioni dell'interfaccia esplicita

Metodi di estensione

Si applica a

Vedi anche

• Procedura: Definire un tipo generico tramite reflection emit