Point Costruttori

Riferimento

Definizione

Spazio dei nomi:: System.Drawing

Assembly:: System.Drawing.Primitives.dll

Assembly:: System.Drawing.dll

Assembly:: netstandard.dll

Importante

Alcune informazioni sono relative alla release non definitiva del prodotto, che potrebbe subire modifiche significative prima della release definitiva. Microsoft non riconosce alcuna garanzia, espressa o implicita, in merito alle informazioni qui fornite.

Inizializza una nuova istanza dello Point struct con le coordinate specificate.

Overload

Point(Size)	Inizializza una nuova istanza dello Point struct da un Sizeoggetto .
Point(Int32)	Inizializza una nuova istanza dello Point struct usando le coordinate specificate da un valore intero.
Point(Int32, Int32)	Inizializza una nuova istanza dello Point struct con le coordinate specificate.

Point(Size)

Source:: Point.cs

Source:: Point.cs

Source:: Point.cs

Inizializza una nuova istanza dello Point struct da un Sizeoggetto .

public:
 Point(System::Drawing::Size sz);

public Point (System.Drawing.Size sz);

new System.Drawing.Point : System.Drawing.Size -> System.Drawing.Point

Public Sub New (sz As Size)

Parametri

sz: Size

Oggetto Size che specifica le coordinate della nuova classe Point.

Esempio

Nell'esempio di codice seguente viene illustrato come usare l'operatore Equality e come costruire un oggetto Point da un Size o due interi. Illustra anche come usare le X proprietà e Y . Questo esempio è progettato per essere usato con Windows Forms. Incollare il codice in un modulo contenente un pulsante denominato Button1e associare il Button1_Click metodo all'evento del Click pulsante.

private:
   void Button1_Click( System::Object^ /*sender*/, System::EventArgs^ /*e*/ )
   {
      // Construct a new Point with integers.
      Point Point1 = Point(100,100);

      // Create a Graphics object.
      Graphics^ formGraphics = this->CreateGraphics();

      // Construct another Point, this time using a Size.
      Point Point2 = Point(System::Drawing::Size( 100, 100 ));

      // Call the equality operator to see if the points are equal,  
      // and if so print out their x and y values.
      if ( Point1 == Point2 )
      {
         array<Object^>^temp0 = {Point1.X,Point2.X,Point1.Y,Point2.Y};
         formGraphics->DrawString( String::Format( "Point1.X: "
         "{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}", temp0 ), this->Font, Brushes::Black, PointF(10,70) );
      }
   }

private void Button1_Click(System.Object sender, System.EventArgs e)
{

    // Construct a new Point with integers.
    Point Point1 = new Point(100, 100);

    // Create a Graphics object.
    Graphics formGraphics = this.CreateGraphics();

    // Construct another Point, this time using a Size.
    Point Point2 = new Point(new Size(100, 100));

    // Call the equality operator to see if the points are equal,  
    // and if so print out their x and y values.
    if (Point1 == Point2)
    {
        formGraphics.DrawString(String.Format("Point1.X: " +
            "{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}",
            new object[]{Point1.X, Point2.X, Point1.Y, Point2.Y}),
            this.Font, Brushes.Black, new PointF(10, 70));
    }
}

Private Sub Button1_Click(ByVal sender As System.Object, _
    ByVal e As System.EventArgs) Handles Button1.Click

    ' Construct a new Point with integers.
    Dim Point1 As New Point(100, 100)

    ' Create a Graphics object.
    Dim formGraphics As Graphics = Me.CreateGraphics()

    ' Construct another Point, this time using a Size.
    Dim Point2 As New Point(New Size(100, 100))

    ' Call the equality operator to see if the points are equal,  
    ' and if so print out their x and y values.
    If (Point.op_Equality(Point1, Point2)) Then
        formGraphics.DrawString(String.Format("Point1.X: " & _
            "{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}", _
            New Object() {Point1.X, Point2.X, Point1.Y, Point2.Y}), _
            Me.Font, Brushes.Black, New PointF(10, 70))
    End If

End Sub

Si applica a

Point(Int32)

Source:: Point.cs

Source:: Point.cs

Source:: Point.cs

Inizializza una nuova istanza dello Point struct usando le coordinate specificate da un valore intero.

public:
 Point(int dw);

public Point (int dw);

new System.Drawing.Point : int -> System.Drawing.Point

Public Sub New (dw As Integer)

Parametri

dw: Int32

Intero a 32 bit che specifica le coordinate del nuovo oggetto Point.

Esempio

Nell'esempio di codice seguente viene illustrato come usare i Point costruttori e Size.Size e l'enumerazione System.Drawing.ContentAlignment . Per eseguire questo esempio, incollare questo codice in un Windows Form contenente un'etichetta denominata Label1e chiamare il InitializeLabel1 metodo nel costruttore del modulo.

void InitializeLabel1()
{
   // Set a border.
   Label1->BorderStyle = BorderStyle::FixedSingle;
   
   // Set the size, constructing a size from two integers.
   Label1->Size = System::Drawing::Size( 100, 50 );
   
   // Set the location, constructing a point from a 32-bit integer
   // (using hexadecimal).
   Label1->Location = Point(0x280028);
   
   // Set and align the text on the lower-right side of the label.
   Label1->TextAlign = ContentAlignment::BottomRight;
   Label1->Text = "Bottom Right Alignment";
}

private void InitializeLabel1()
{
    // Set a border.
    Label1.BorderStyle = BorderStyle.FixedSingle;

    // Set the size, constructing a size from two integers.
    Label1.Size = new Size(100, 50);

    // Set the location, constructing a point from a 32-bit integer
    // (using hexadecimal).
    Label1.Location = new Point(0x280028);

    // Set and align the text on the lower-right side of the label.
    Label1.TextAlign = ContentAlignment.BottomRight;
    Label1.Text = "Bottom Right Alignment";
}

Private Sub InitializeLabel1()

    ' Set a border.
    Label1.BorderStyle = BorderStyle.FixedSingle

    ' Set the size, constructing a size from two integers.
    Label1.Size = New Size(100, 50)

    ' Set the location, constructing a point from a 32-bit integer
    ' (using hexadecimal).
    Label1.Location = New Point(&H280028)

    ' Set and align the text on the lower-right side of the label.
    Label1.TextAlign = ContentAlignment.BottomRight
    Label1.Text = "Bottom Right Alignment"
End Sub

Commenti

I 16 bit di basso ordine del dw parametro specificano la coordinata x orizzontale e i 16 bit superiori specificano la coordinata y verticale per il nuovo Point.

Si applica a

Point(Int32, Int32)

Source:: Point.cs

Source:: Point.cs

Source:: Point.cs

Inizializza una nuova istanza dello Point struct con le coordinate specificate.

public:
 Point(int x, int y);

public Point (int x, int y);

new System.Drawing.Point : int * int -> System.Drawing.Point

Public Sub New (x As Integer, y As Integer)

Parametri

x: Int32

Posizione orizzontale del punto.

y: Int32

Posizione verticale del punto.

Esempio

private:
   void Button1_Click( System::Object^ /*sender*/, System::EventArgs^ /*e*/ )
   {
      // Construct a new Point with integers.
      Point Point1 = Point(100,100);

      // Create a Graphics object.
      Graphics^ formGraphics = this->CreateGraphics();

      // Construct another Point, this time using a Size.
      Point Point2 = Point(System::Drawing::Size( 100, 100 ));

      // Call the equality operator to see if the points are equal,  
      // and if so print out their x and y values.
      if ( Point1 == Point2 )
      {
         array<Object^>^temp0 = {Point1.X,Point2.X,Point1.Y,Point2.Y};
         formGraphics->DrawString( String::Format( "Point1.X: "
         "{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}", temp0 ), this->Font, Brushes::Black, PointF(10,70) );
      }
   }

private void Button1_Click(System.Object sender, System.EventArgs e)
{

    // Construct a new Point with integers.
    Point Point1 = new Point(100, 100);

    // Create a Graphics object.
    Graphics formGraphics = this.CreateGraphics();

    // Construct another Point, this time using a Size.
    Point Point2 = new Point(new Size(100, 100));

    // Call the equality operator to see if the points are equal,  
    // and if so print out their x and y values.
    if (Point1 == Point2)
    {
        formGraphics.DrawString(String.Format("Point1.X: " +
            "{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}",
            new object[]{Point1.X, Point2.X, Point1.Y, Point2.Y}),
            this.Font, Brushes.Black, new PointF(10, 70));
    }
}

Private Sub Button1_Click(ByVal sender As System.Object, _
    ByVal e As System.EventArgs) Handles Button1.Click

    ' Construct a new Point with integers.
    Dim Point1 As New Point(100, 100)

    ' Create a Graphics object.
    Dim formGraphics As Graphics = Me.CreateGraphics()

    ' Construct another Point, this time using a Size.
    Dim Point2 As New Point(New Size(100, 100))

    ' Call the equality operator to see if the points are equal,  
    ' and if so print out their x and y values.
    If (Point.op_Equality(Point1, Point2)) Then
        formGraphics.DrawString(String.Format("Point1.X: " & _
            "{0},Point2.X: {1}, Point1.Y: {2}, Point2.Y {3}", _
            New Object() {Point1.X, Point2.X, Point1.Y, Point2.Y}), _
            Me.Font, Brushes.Black, New PointF(10, 70))
    End If

End Sub

Si applica a

Point Costruttori

Definizione

Overload

Point(Size)

Parametri

Esempio

Si applica a

Point(Int32)

Parametri

Esempio

Commenti

Si applica a

Point(Int32, Int32)

Parametri

Esempio

Si applica a

Commenti e suggerimenti

Risorse aggiuntive