Partager via


Comment : générer des notifications de modifications à l'aide d'un BindingSource et de l'interface INotifyPropertyChanged

Le composant BindingSource détecte automatiquement les modifications d'une source de données lorsque le type contenu dans la source de données implémente l'interface INotifyPropertyChanged et déclenche des événements PropertyChanged lorsqu'une valeur de propriété est modifiée. Cela est utile, car les contrôles liés à BindingSource seront ensuite mis à jour automatiquement au fur et à mesure des modifications apportées aux valeurs de sources de données.

Notes

Si votre source de données implémente INotifyPropertyChanged et si vous exécutez des opérations asynchrones, vous ne devez pas apporter de modifications à la source de données sur un thread d'arrière-plan. Vous devez à la place lire les données sur un thread d'arrière-plan et les fusionner dans une liste sur le thread d'interface utilisateur.

Exemple

L'exemple de code suivant illustre une implémentation simple de l'interface INotifyPropertyChanged. Il illustre également la façon dont BindingSource transmet automatiquement une modification apportée à une source de données à un contrôle lié lorsque BindingSource est lié à une liste de type INotifyPropertyChanged.

Imports System
Imports System.Collections.Generic
Imports System.ComponentModel
Imports System.Data
Imports System.Data.Common
Imports System.Diagnostics
Imports System.Drawing
Imports System.Data.SqlClient
Imports System.Windows.Forms

' This form demonstrates using a BindingSource to bind
' a list to a DataGridView control. The list does not
' raise change notifications, however the DemoCustomer type 
' in the list does.

Public Class Form1
    Inherits System.Windows.Forms.Form
    ' This button causes the value of a list element to be changed.
    Private changeItemBtn As New Button()

    ' This DataGridView control displays the contents of the list.
    Private customersDataGridView As New DataGridView()

    ' This BindingSource binds the list to the DataGridView control.
    Private customersBindingSource As New BindingSource()

    Public Sub New()
        ' Set up the "Change Item" button.
        Me.changeItemBtn.Text = "Change Item"
        Me.changeItemBtn.Dock = DockStyle.Bottom
        AddHandler Me.changeItemBtn.Click, AddressOf changeItemBtn_Click
        Me.Controls.Add(Me.changeItemBtn)

        ' Set up the DataGridView.
        customersDataGridView.Dock = DockStyle.Top
        Me.Controls.Add(customersDataGridView)

        Me.Size = New Size(800, 200)
        AddHandler Me.Load, AddressOf Form1_Load

    End Sub 'New

    Private Sub Form1_Load(ByVal sender As System.Object, _
        ByVal e As System.EventArgs) Handles Me.Load

        ' Create and populate the list of DemoCustomer objects
        ' which will supply data to the DataGridView.
        Dim customerList As New BindingList(Of DemoCustomer)

        customerList.Add(DemoCustomer.CreateNewCustomer())
        customerList.Add(DemoCustomer.CreateNewCustomer())
        customerList.Add(DemoCustomer.CreateNewCustomer())

        ' Bind the list to the BindingSource.
        Me.customersBindingSource.DataSource = customerList

        ' Attach the BindingSource to the DataGridView.
        Me.customersDataGridView.DataSource = Me.customersBindingSource

    End Sub 'Form1_Load

    ' This event handler changes the value of the CompanyName
    ' property for the first item in the list.
    Private Sub changeItemBtn_Click(ByVal sender As Object, ByVal e As EventArgs)
        ' Get a reference to the list from the BindingSource.
        Dim customerList As BindingList(Of DemoCustomer) = _
            CType(customersBindingSource.DataSource, BindingList(Of DemoCustomer))

        ' Change the value of the CompanyName property for the 
        ' first item in the list.
        customerList(0).CustomerName = "Tailspin Toys"

    End Sub



    <STAThread()> _
    Shared Sub Main()
        Application.EnableVisualStyles()
        Application.Run(New Form1())

    End Sub
End Class

' This class implements a simple customer type 
' that implements the IPropertyChange interface.

Public Class DemoCustomer
    Implements INotifyPropertyChanged

    ' These fields hold the values for the public properties.
    Private idValue As Guid = Guid.NewGuid()
    Private customerNameValue As String = String.Empty
    Private phoneNumberValue As String = String.Empty

    Public Event PropertyChanged As PropertyChangedEventHandler _
        Implements INotifyPropertyChanged.PropertyChanged

    Private Sub NotifyPropertyChanged(ByVal info As String)
        RaiseEvent PropertyChanged(Me, New PropertyChangedEventArgs(info))
    End Sub

    ' The constructor is private to enforce the factory pattern.
    Private Sub New()
        customerNameValue = "Customer"
        phoneNumberValue = "(555)555-5555"

    End Sub

    ' This is the public factory method.
    Public Shared Function CreateNewCustomer() As DemoCustomer
        Return New DemoCustomer()

    End Function

    ' This property represents an ID, suitable
    ' for use as a primary key in a database.
    Public ReadOnly Property ID() As Guid
        Get
            Return Me.idValue
        End Get
    End Property


    Public Property CustomerName() As String
        Get
            Return Me.customerNameValue
        End Get

        Set(ByVal value As String)
            If Not (value = customerNameValue) Then
                Me.customerNameValue = value
                NotifyPropertyChanged("CustomerName")
            End If
        End Set
    End Property


    Public Property PhoneNumber() As String
        Get
            Return Me.phoneNumberValue
        End Get

        Set(ByVal value As String)
            If Not (value = phoneNumberValue) Then
                Me.phoneNumberValue = value
                NotifyPropertyChanged("PhoneNumber")
            End If

        End Set
    End Property
End Class
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Data.Common;
using System.Diagnostics;
using System.Drawing;
using System.Data.SqlClient;
using System.Windows.Forms;

// This form demonstrates using a BindingSource to bind
// a list to a DataGridView control. The list does not
// raise change notifications, however the DemoCustomer type 
// in the list does.
public class Form1 : System.Windows.Forms.Form
{
    // This button causes the value of a list element to be changed.
    private Button changeItemBtn = new Button();

    // This DataGridView control displays the contents of the list.
    private DataGridView customersDataGridView = new DataGridView();

    // This BindingSource binds the list to the DataGridView control.
    private BindingSource customersBindingSource = new BindingSource();

    public Form1()
    {
        // Set up the "Change Item" button.
        this.changeItemBtn.Text = "Change Item";
        this.changeItemBtn.Dock = DockStyle.Bottom;
        this.changeItemBtn.Click +=
            new EventHandler(changeItemBtn_Click);
        this.Controls.Add(this.changeItemBtn);

        // Set up the DataGridView.
        customersDataGridView.Dock = DockStyle.Top;
        this.Controls.Add(customersDataGridView);

        this.Size = new Size(800, 200);
        this.Load += new EventHandler(Form1_Load);
    }

    private void Form1_Load(System.Object sender, System.EventArgs e)
    {
        // Create and populate the list of DemoCustomer objects
        // which will supply data to the DataGridView.
        BindingList<DemoCustomer> customerList = new BindingList<DemoCustomer>();
        customerList.Add(DemoCustomer.CreateNewCustomer());
        customerList.Add(DemoCustomer.CreateNewCustomer());
        customerList.Add(DemoCustomer.CreateNewCustomer());

        // Bind the list to the BindingSource.
        this.customersBindingSource.DataSource = customerList;

        // Attach the BindingSource to the DataGridView.
        this.customersDataGridView.DataSource =
            this.customersBindingSource;
    }

    // Change the value of the CompanyName property for the first 
    // item in the list when the "Change Item" button is clicked.
    void changeItemBtn_Click(object sender, EventArgs e)
    {
        // Get a reference to the list from the BindingSource.
        BindingList<DemoCustomer> customerList =
            this.customersBindingSource.DataSource as BindingList<DemoCustomer>;

        // Change the value of the CompanyName property for the 
        // first item in the list.
        customerList[0].CustomerName = "Tailspin Toys";
    }

    [STAThread]
    static void Main()
    {
        Application.EnableVisualStyles();
        Application.Run(new Form1());
    }
}

// This is a simple customer class that 
// implements the IPropertyChange interface.
public class DemoCustomer  : INotifyPropertyChanged
{
    // These fields hold the values for the public properties.
    private Guid idValue = Guid.NewGuid();
    private string customerNameValue = String.Empty;
    private string phoneNumberValue = String.Empty;

    public event PropertyChangedEventHandler PropertyChanged;

    private void NotifyPropertyChanged(String info)
    {
        if (PropertyChanged != null)
        {
            PropertyChanged(this, new PropertyChangedEventArgs(info));
        }
    }

    // The constructor is private to enforce the factory pattern.
    private DemoCustomer()
    {
        customerNameValue = "Customer";
        phoneNumberValue = "(555)555-5555";
    }

    // This is the public factory method.
    public static DemoCustomer CreateNewCustomer()
    {
        return new DemoCustomer();
    }

    // This property represents an ID, suitable
    // for use as a primary key in a database.
    public Guid ID
    {
        get
        {
            return this.idValue;
        }
    }

    public string CustomerName
    {
        get
        {
            return this.customerNameValue;
        }

        set
        {
            if (value != this.customerNameValue)
            {
                this.customerNameValue = value;
                NotifyPropertyChanged("CustomerName");
            }
        }
    }

    public string PhoneNumber
    {
        get
        {
            return this.phoneNumberValue;
        }

        set
        {
            if (value != this.phoneNumberValue)
            {
                this.phoneNumberValue = value;
                NotifyPropertyChanged("PhoneNumber");
            }
        }
    }
}

Compilation du code

Cet exemple nécessite les actions ou les éléments suivants :

  • Références aux assemblys System, System.Data, System.Drawing et System.Windows.Forms.

Pour plus d'informations sur la génération de cet exemple à partir de la ligne de commande pour Visual Basic ou Visual C#, consultez Génération à partir de la ligne de commande (Visual Basic) ou Génération à partir de la ligne de commande avec csc.exe. Vous pouvez aussi générer cet exemple dans Visual Studio en collant le code dans un nouveau projet. Pour plus d'informations, consultez Comment : compiler et exécuter un exemple complet de code Windows Forms à l'aide de Visual Studio et Comment : compiler et exécuter un exemple complet de code Windows Forms à l'aide de Visual Studio et Comment : compiler et exécuter un exemple complet de code Windows Forms à l'aide de Visual Studio et Comment : compiler et exécuter un exemple complet de code Windows Forms à l'aide de Visual Studio et Comment : compiler et exécuter un exemple complet de code Windows Forms à l'aide de Visual Studio.

Voir aussi

Tâches

Comment : générer des notifications de modifications à l'aide de la méthode ResetItem de BindingSource

Référence

INotifyPropertyChanged

Autres ressources

Composant BindingSource