Partager via


Procédure : créer un abonnement par extraction de données (pull) (programmation RMO)

Les abonnements par extraction de données (pull) peuvent être créés par le biais de la programmation au moyen des objets RMO (Replication Management Objects). Les classes RMO utilisées pour créer un abonnement par extraction de données (pull) sont fonction du type de publication à laquelle l'abonnement appartient.

Pour créer un abonnement par extraction de données (pull) ou une publication transactionnelle

  1. Créez des connexions à la fois à l'Abonné et au serveur de publication au moyen de la classe ServerConnection.

  2. Créez une instance de la classe TransPublication en utilisant la connexion au serveur de publication de l'étape 1. Spécifiez Name, DatabaseName et ConnectionContext.

  3. Appelez la méthode LoadProperties. Si cette méthode renvoie false, les propriétés spécifiées à l'étape 2 sont incorrectes ou la publication n'existe pas sur le serveur.

  4. Effectuez une opération AND logique au niveau du bit (& dans Visual C# et And dans Visual Basic) entre la propriété Attributes et AllowPull. Si le résultat est None, appliquez àAttributes le résutat d'une opération OR logique au niveau du bit (| dans Visual C# et Or dans Visual Basic) entre Attributes et AllowPull. Ensuite, appelez CommitPropertyChanges pour activer les abonnements par extraction de données (pull).

  5. Si la base de données d'abonnements n'existe pas, créez-la en utilisant la classe Database. Pour plus d'informations, consultez Création, modification et suppression de bases de données.

  6. Créez une instance de la classe TransPullSubscription.

  7. Définissez les propriétés suivantes des abonnements :

  8. Appelez la méthode Create.

  9. Au moyen de l'instance de la classe TransPublication de l'étape 2, appelez la méthode MakePullSubscriptionWellKnown pour inscrire l'abonnement par extraction de données (pull) sur le serveur de publication. Si l'abonnement est déjà inscrit dans le Registre, une erreur se produit.

Pour créer un abonnement par extraction de données (pull) vers une publication de fusion

  1. Créez des connexions à la fois à l'Abonné et au serveur de publication au moyen de la classe ServerConnection.

  2. Créez une instance de la classe MergePublication en utilisant la connexion au serveur de publication de l'étape 1. Spécifiez Name, DatabaseName et ConnectionContext.

  3. Appelez la méthode LoadProperties. Si cette méthode renvoie false, les propriétés spécifiées à l'étape 2 sont incorrectes ou la publication n'existe pas sur le serveur.

  4. Effectuez une opération AND logique au niveau du bit (& dans Visual C# et And dans Visual Basic) entre la propriété Attributes et AllowPull. Si le résultat est None, appliquez àAttributes le résutat d'une opération OR logique au niveau du bit (| dans Visual C# et Or dans Visual Basic) entre Attributes et AllowPull. Ensuite, appelez CommitPropertyChanges pour activer les abonnements par extraction de données (pull).

  5. Si la base de données d'abonnements n'existe pas, créez-la en utilisant la classe Database. Pour plus d'informations, consultez Création, modification et suppression de bases de données.

  6. Créez une instance de la classe MergePullSubscription.

  7. Définissez les propriétés suivantes des abonnements :

  8. Appelez la méthode Create.

  9. Au moyen de l'instance de la classe MergePublication de l'étape 2, appelez la méthode MakePullSubscriptionWellKnown pour inscrire l'abonnement par extraction de données (pull) sur le serveur de publication. Si l'abonnement est déjà inscrit dans le Registre, une erreur se produit.

Exemple

Cet exemple crée un abonnement par extraction de données (pull) vers une publication transactionnelle. Les informations d'identification de compte Microsoft utilisées pour créer le travail d'agent de distribution sont transmises au moment de l'exécution.

           // Define the Publisher, publication, and databases.
            string publicationName = "AdvWorksProductTran";
            string publisherName = publisherInstance;
            string subscriberName = subscriberInstance;
            string subscriptionDbName = "AdventureWorks2008R2Replica";
            string publicationDbName = "AdventureWorks2008R2";

            //Create connections to the Publisher and Subscriber.
            ServerConnection subscriberConn = new ServerConnection(subscriberName);
            ServerConnection publisherConn = new ServerConnection(publisherName);

            // Create the objects that we need.
            TransPublication publication;
            TransPullSubscription subscription;

            try
            {
                // Connect to the Publisher and Subscriber.
                subscriberConn.Connect();
                publisherConn.Connect();

                // Ensure that the publication exists and that 
                // it supports pull subscriptions.
                publication = new TransPublication();
                publication.Name = publicationName;
                publication.DatabaseName = publicationDbName;
                publication.ConnectionContext = publisherConn;

                if (publication.IsExistingObject)
                {
                    if ((publication.Attributes & PublicationAttributes.AllowPull) == 0)
                    {
                        publication.Attributes |= PublicationAttributes.AllowPull;
                    }

                    // Define the pull subscription.
                    subscription = new TransPullSubscription();
                    subscription.ConnectionContext = subscriberConn;
                    subscription.PublisherName = publisherName;
                    subscription.PublicationName = publicationName;
                    subscription.PublicationDBName = publicationDbName;
                    subscription.DatabaseName = subscriptionDbName;

                    // Specify the Windows login credentials for the Distribution Agent job.
                    subscription.SynchronizationAgentProcessSecurity.Login = winLogin;
                    subscription.SynchronizationAgentProcessSecurity.Password = winPassword;

                    // Make sure that the agent job for the subscription is created.
                    subscription.CreateSyncAgentByDefault = true;

                    // By default, subscriptions to transactional publications are synchronized 
                    // continuously, but in this case we only want to synchronize on demand.
                    subscription.AgentSchedule.FrequencyType = ScheduleFrequencyType.OnDemand;

                    // Create the pull subscription at the Subscriber.
                    subscription.Create();

                    Boolean registered = false;

                    // Verify that the subscription is not already registered.
                    foreach (TransSubscription existing
                        in publication.EnumSubscriptions())
                    {
                        if (existing.SubscriberName == subscriberName
                            && existing.SubscriptionDBName == subscriptionDbName)
                        {
                            registered = true;
                        }
                    }
                    if (!registered)
                    {
                        // Register the subscription with the Publisher.
                        publication.MakePullSubscriptionWellKnown(
                            subscriberName, subscriptionDbName,
                            SubscriptionSyncType.Automatic,
                            TransSubscriberType.ReadOnly);
                    }
                }
                else
                {
                    // Do something here if the publication does not exist.
                    throw new ApplicationException(String.Format(
                        "The publication '{0}' does not exist on {1}.",
                        publicationName, publisherName));
                }
            }
            catch (Exception ex)
            {
                // Implement the appropriate error handling here.
                throw new ApplicationException(String.Format(
                    "The subscription to {0} could not be created.", publicationName), ex);
            }
            finally
            {
                subscriberConn.Disconnect();
                publisherConn.Disconnect();
            }
' Define the Publisher, publication, and databases.
Dim publicationName As String = "AdvWorksProductTran"
Dim publisherName As String = publisherInstance
Dim subscriberName As String = subscriberInstance
Dim subscriptionDbName As String = "AdventureWorks2008R2Replica"
Dim publicationDbName As String = "AdventureWorks2008R2"

'Create connections to the Publisher and Subscriber.
Dim subscriberConn As ServerConnection = New ServerConnection(subscriberName)
Dim publisherConn As ServerConnection = New ServerConnection(publisherName)

' Create the objects that we need.
Dim publication As TransPublication
Dim subscription As TransPullSubscription

Try
    ' Connect to the Publisher and Subscriber.
    subscriberConn.Connect()
    publisherConn.Connect()

    ' Ensure that the publication exists and that 
    ' it supports pull subscriptions.
    publication = New TransPublication()
    publication.Name = publicationName
    publication.DatabaseName = publicationDbName
    publication.ConnectionContext = publisherConn

    If publication.IsExistingObject Then
        If (publication.Attributes And PublicationAttributes.AllowPull) = 0 Then
            publication.Attributes = publication.Attributes _
            Or PublicationAttributes.AllowPull
        End If

        ' Define the pull subscription.
        subscription = New TransPullSubscription()
        subscription.ConnectionContext = subscriberConn
        subscription.PublisherName = publisherName
        subscription.PublicationName = publicationName
        subscription.PublicationDBName = publicationDbName
        subscription.DatabaseName = subscriptionDbName
        subscription.Description = "Pull subscription to " + publicationDbName _
        + " on " + subscriberName + "."

        ' Specify the Windows login credentials for the Distribution Agent job.
        subscription.SynchronizationAgentProcessSecurity.Login = winLogin
        subscription.SynchronizationAgentProcessSecurity.Password = winPassword

        ' Make sure that the agent job for the subscription is created.
        subscription.CreateSyncAgentByDefault = True

        ' By default, subscriptions to transactional publications are synchronized 
        ' continuously, but in this case we only want to synchronize on demand.
        subscription.AgentSchedule.FrequencyType = ScheduleFrequencyType.OnDemand

        ' Create the pull subscription at the Subscriber.
        subscription.Create()

        Dim registered As Boolean = False

        ' Verify that the subscription is not already registered.
        For Each existing As TransSubscription In publication.EnumSubscriptions()
            If existing.SubscriberName = subscriberName And _
                existing.SubscriptionDBName = subscriptionDbName Then
                registered = True
            End If
        Next existing
        If Not registered Then
            ' Register the subscription with the Publisher.
            publication.MakePullSubscriptionWellKnown( _
             subscriberName, subscriptionDbName, _
             SubscriptionSyncType.Automatic, _
             TransSubscriberType.ReadOnly)
        End If
    Else
        ' Do something here if the publication does not exist.
        Throw New ApplicationException(String.Format( _
         "The publication '{0}' does not exist on {1}.", _
         publicationName, publisherName))
    End If
Catch ex As Exception
    ' Implement the appropriate error handling here.
    Throw New ApplicationException(String.Format( _
        "The subscription to {0} could not be created.", publicationName), ex)
Finally
    subscriberConn.Disconnect()
    publisherConn.Disconnect()
End Try

Cet exemple crée un abonnement par extraction de données (pull) vers une publication de fusion. Les informations d'identification de compte Windows utilisées pour créer le travail d'agent de fusion sont transmises au moment de l'exécution.

            // Define the Publisher, publication, and databases.
            string publicationName = "AdvWorksSalesOrdersMerge";
            string publisherName = publisherInstance;
            string subscriberName = subscriberInstance;
            string subscriptionDbName = "AdventureWorks2008R2Replica";
            string publicationDbName = "AdventureWorks2008R2";
            string hostname = @"adventure-works\garrett1";

            //Create connections to the Publisher and Subscriber.
            ServerConnection subscriberConn = new ServerConnection(subscriberName);
            ServerConnection publisherConn = new ServerConnection(publisherName);

            // Create the objects that we need.
            MergePublication publication;
            MergePullSubscription subscription;

            try
            {
                // Connect to the Subscriber.
                subscriberConn.Connect();

                // Ensure that the publication exists and that 
                // it supports pull subscriptions.
                publication = new MergePublication();
                publication.Name = publicationName;
                publication.DatabaseName = publicationDbName;
                publication.ConnectionContext = publisherConn;

                if (publication.LoadProperties())
                {
                    if ((publication.Attributes & PublicationAttributes.AllowPull) == 0)
                    {
                        publication.Attributes |= PublicationAttributes.AllowPull;
                    }

                    // Define the pull subscription.
                    subscription = new MergePullSubscription();
                    subscription.ConnectionContext = subscriberConn;
                    subscription.PublisherName = publisherName;
                    subscription.PublicationName = publicationName;
                    subscription.PublicationDBName = publicationDbName;
                    subscription.DatabaseName = subscriptionDbName;
                    subscription.HostName = hostname;

                    // Specify the Windows login credentials for the Merge Agent job.
                    subscription.SynchronizationAgentProcessSecurity.Login = winLogin;
                    subscription.SynchronizationAgentProcessSecurity.Password = winPassword;

                    // Make sure that the agent job for the subscription is created.
                    subscription.CreateSyncAgentByDefault = true;

                    // Create the pull subscription at the Subscriber.
                    subscription.Create();

                    Boolean registered = false;

                    // Verify that the subscription is not already registered.
                    foreach (MergeSubscription existing
                        in publication.EnumSubscriptions())
                    {
                        if (existing.SubscriberName == subscriberName
                            && existing.SubscriptionDBName == subscriptionDbName
                            && existing.SubscriptionType == SubscriptionOption.Pull)
                        {
                            registered = true;
                        }
                    }
                    if (!registered)
                    {
                        // Register the local subscription with the Publisher.
                        publication.MakePullSubscriptionWellKnown(
                            subscriberName, subscriptionDbName,
                            SubscriptionSyncType.Automatic,
                            MergeSubscriberType.Local, 0);
                    }
                }
                else
                {
                    // Do something here if the publication does not exist.
                    throw new ApplicationException(String.Format(
                        "The publication '{0}' does not exist on {1}.",
                        publicationName, publisherName));
                }
            }
            catch (Exception ex)
            {
                // Implement the appropriate error handling here.
                throw new ApplicationException(String.Format(
                    "The subscription to {0} could not be created.", publicationName), ex);
            }
            finally
            {
                subscriberConn.Disconnect();
                publisherConn.Disconnect();
            }
' Define the Publisher, publication, and databases.
Dim publicationName As String = "AdvWorksSalesOrdersMerge"
Dim publisherName As String = publisherInstance
Dim subscriberName As String = subscriberInstance
Dim subscriptionDbName As String = "AdventureWorks2008R2Replica"
Dim publicationDbName As String = "AdventureWorks2008R2"
Dim hostname As String = "adventure-works\garrett1"

'Create connections to the Publisher and Subscriber.
Dim subscriberConn As ServerConnection = New ServerConnection(subscriberName)
Dim publisherConn As ServerConnection = New ServerConnection(publisherName)

' Create the objects that we need.
Dim publication As MergePublication
Dim subscription As MergePullSubscription

Try
    ' Connect to the Subscriber.
    subscriberConn.Connect()

    ' Ensure that the publication exists and that 
    ' it supports pull subscriptions.
    publication = New MergePublication()
    publication.Name = publicationName
    publication.DatabaseName = publicationDbName
    publication.ConnectionContext = publisherConn

    If publication.LoadProperties() Then
        If (publication.Attributes And PublicationAttributes.AllowPull) = 0 Then
            publication.Attributes = publication.Attributes _
            Or PublicationAttributes.AllowPull
        End If

        ' Define the pull subscription.
        subscription = New MergePullSubscription()
        subscription.ConnectionContext = subscriberConn
        subscription.PublisherName = publisherName
        subscription.PublicationName = publicationName
        subscription.PublicationDBName = publicationDbName
        subscription.DatabaseName = subscriptionDbName
        subscription.HostName = hostname

        ' Specify the Windows login credentials for the Merge Agent job.
        subscription.SynchronizationAgentProcessSecurity.Login = winLogin
        subscription.SynchronizationAgentProcessSecurity.Password = winPassword

        ' Make sure that the agent job for the subscription is created.
        subscription.CreateSyncAgentByDefault = True

        ' Create the pull subscription at the Subscriber.
        subscription.Create()

        Dim registered As Boolean = False

        ' Verify that the subscription is not already registered.
        For Each existing As MergeSubscription In _
        publication.EnumSubscriptions()
            If existing.SubscriberName = subscriberName Then
                registered = True
            End If
        Next
        If Not registered Then
            ' Register the local subscription with the Publisher.
            publication.MakePullSubscriptionWellKnown( _
             subscriberName, subscriptionDbName, _
             SubscriptionSyncType.Automatic, _
             MergeSubscriberType.Local, 0)
        End If
    Else
        ' Do something here if the publication does not exist.
        Throw New ApplicationException(String.Format( _
         "The publication '{0}' does not exist on {1}.", _
         publicationName, publisherName))
    End If
Catch ex As Exception
    ' Implement the appropriate error handling here.
    Throw New ApplicationException(String.Format( _
        "The subscription to {0} could not be created.", publicationName), ex)
Finally
    subscriberConn.Disconnect()
    publisherConn.Disconnect()
End Try

Cet exemple crée un abonnement par extraction de données (pull) vers une publication de fusion sans créer de travail d'agent et de métadonnées d'abonnement associés dans MSsubscription_properties. Les informations d'identification de compte Windows utilisées pour créer le travail d'agent de fusion sont transmises au moment de l'exécution.

           // Define the Publisher, publication, and databases.
            string publicationName = "AdvWorksSalesOrdersMerge";
            string publisherName = publisherInstance;
            string subscriberName = subscriberInstance;
            string subscriptionDbName = "AdventureWorks2008R2Replica";
            string publicationDbName = "AdventureWorks2008R2";

            //Create connections to the Publisher and Subscriber.
            ServerConnection subscriberConn = new ServerConnection(subscriberName);
            ServerConnection publisherConn = new ServerConnection(publisherName);

            // Create the objects that we need.
            MergePublication publication;
            MergePullSubscription subscription;

            try
            {
                // Connect to the Subscriber.
                subscriberConn.Connect();

                // Ensure that the publication exists and that 
                // it supports pull subscriptions.
                publication = new MergePublication();
                publication.Name = publicationName;
                publication.DatabaseName = publicationDbName;
                publication.ConnectionContext = publisherConn;

                if (publication.LoadProperties())
                {
                    if ((publication.Attributes & PublicationAttributes.AllowPull) == 0)
                    {
                        publication.Attributes |= PublicationAttributes.AllowPull;
                    }

                    // Define the pull subscription.
                    subscription = new MergePullSubscription();
                    subscription.ConnectionContext = subscriberConn;
                    subscription.PublisherName = publisherName;
                    subscription.PublicationName = publicationName;
                    subscription.PublicationDBName = publicationDbName;
                    subscription.DatabaseName = subscriptionDbName;

                    // Specify that an agent job not be created for this subscription. The
                    // subscription can only be synchronized by running the Merge Agent directly.
                    // Subscripition metadata stored in MSsubscription_properties will not
                    // be available and must be specified at run time.
                    subscription.CreateSyncAgentByDefault = false;

                    // Create the pull subscription at the Subscriber.
                    subscription.Create();

                    Boolean registered = false;

                    // Verify that the subscription is not already registered.
                    foreach (MergeSubscription existing
                        in publication.EnumSubscriptions())
                    {
                        if (existing.SubscriberName == subscriberName
                            && existing.SubscriptionDBName == subscriptionDbName
                            && existing.SubscriptionType == SubscriptionOption.Pull)
                        {
                            registered = true;
                        }
                    }
                    if (!registered)
                    {
                        // Register the local subscription with the Publisher.
                        publication.MakePullSubscriptionWellKnown(
                            subscriberName, subscriptionDbName,
                            SubscriptionSyncType.Automatic,
                            MergeSubscriberType.Local, 0);
                    }
                }
                else
                {
                    // Do something here if the publication does not exist.
                    throw new ApplicationException(String.Format(
                        "The publication '{0}' does not exist on {1}.",
                        publicationName, publisherName));
                }
            }
            catch (Exception ex)
            {
                // Implement the appropriate error handling here.
                throw new ApplicationException(String.Format(
                    "The subscription to {0} could not be created.", publicationName), ex);
            }
            finally
            {
                subscriberConn.Disconnect();
                publisherConn.Disconnect();
            }
' Define the Publisher, publication, and databases.
Dim publicationName As String = "AdvWorksSalesOrdersMerge"
Dim publisherName As String = publisherInstance
Dim subscriberName As String = subscriberInstance
Dim subscriptionDbName As String = "AdventureWorks2008R2Replica"
Dim publicationDbName As String = "AdventureWorks2008R2"

'Create connections to the Publisher and Subscriber.
Dim subscriberConn As ServerConnection = New ServerConnection(subscriberName)
Dim publisherConn As ServerConnection = New ServerConnection(publisherName)

' Create the objects that we need.
Dim publication As MergePublication
Dim subscription As MergePullSubscription

Try
    ' Connect to the Subscriber.
    subscriberConn.Connect()

    ' Ensure that the publication exists and that 
    ' it supports pull subscriptions.
    publication = New MergePublication()
    publication.Name = publicationName
    publication.DatabaseName = publicationDbName
    publication.ConnectionContext = publisherConn

    If publication.LoadProperties() Then
        If (publication.Attributes And PublicationAttributes.AllowPull) = 0 Then
            publication.Attributes = publication.Attributes _
            Or PublicationAttributes.AllowPull
        End If

        ' Define the pull subscription.
        subscription = New MergePullSubscription()
        subscription.ConnectionContext = subscriberConn
        subscription.PublisherName = publisherName
        subscription.PublicationName = publicationName
        subscription.PublicationDBName = publicationDbName
        subscription.DatabaseName = subscriptionDbName

        ' Specify that an agent job not be created for this subscription. The
        ' subscription can only be synchronized by running the Merge Agent directly.
        ' Subscripition metadata stored in MSsubscription_properties will not
        ' be available and must be specified at run time.
        subscription.CreateSyncAgentByDefault = False

        ' Create the pull subscription at the Subscriber.
        subscription.Create()

        Dim registered As Boolean = False

        ' Verify that the subscription is not already registered.
        For Each existing As MergeSubscription In _
        publication.EnumSubscriptions()
            If existing.SubscriberName = subscriberName Then
                registered = True
            End If
        Next
        If Not registered Then
            ' Register the local subscription with the Publisher.
            publication.MakePullSubscriptionWellKnown( _
             subscriberName, subscriptionDbName, _
             SubscriptionSyncType.Automatic, _
             MergeSubscriberType.Local, 0)
        End If
    Else
        ' Do something here if the publication does not exist.
        Throw New ApplicationException(String.Format( _
         "The publication '{0}' does not exist on {1}.", _
         publicationName, publisherName))
    End If
Catch ex As Exception
    ' Implement the appropriate error handling here.
    Throw New ApplicationException(String.Format( _
     "The subscription to {0} could not be created.", publicationName), ex)
Finally
    subscriberConn.Disconnect()
    publisherConn.Disconnect()
End Try

Cet exemple crée un abonnement par envoi de données (pull) vers une publication de fusion qui peut être synchronisée via Internet au moyen de la synchronisation Web. Les informations d'identification de compte Windows utilisées pour créer le travail d'agent de fusion sont transmises au moment de l'exécution. Pour plus d'informations, consultez Procédure : configurer la synchronisation Web pour la réplication de fusion (programmation RMO)

          // Define the Publisher, publication, and databases.
            string publicationName = "AdvWorksSalesOrdersMerge";
            string publisherName = publisherInstance;
            string subscriberName = subscriberInstance;
            string subscriptionDbName = "AdventureWorks2008R2Replica";
            string publicationDbName = "AdventureWorks2008R2";
            string hostname = @"adventure-works\garrett1";
            string webSyncUrl = "https://" + publisherInstance + "/WebSync/replisapi.dll";

            //Create connections to the Publisher and Subscriber.
            ServerConnection subscriberConn = new ServerConnection(subscriberName);
            ServerConnection publisherConn = new ServerConnection(publisherName);

            // Create the objects that we need.
            MergePublication publication;
            MergePullSubscription subscription;

            try
            {
                // Connect to the Subscriber.
                subscriberConn.Connect();

                // Ensure that the publication exists and that 
                // it supports pull subscriptions and Web synchronization.
                publication = new MergePublication();
                publication.Name = publicationName;
                publication.DatabaseName = publicationDbName;
                publication.ConnectionContext = publisherConn;

                if (publication.LoadProperties())
                {
                    if ((publication.Attributes & PublicationAttributes.AllowPull) == 0)
                    {
                        publication.Attributes |= PublicationAttributes.AllowPull;
                    }
                    if ((publication.Attributes & PublicationAttributes.AllowWebSynchronization) == 0)
                    {
                        publication.Attributes |= PublicationAttributes.AllowWebSynchronization;
                    }

                    // Define the pull subscription.
                    subscription = new MergePullSubscription();
                    subscription.ConnectionContext = subscriberConn;
                    subscription.PublisherName = publisherName;
                    subscription.PublicationName = publicationName;
                    subscription.PublicationDBName = publicationDbName;
                    subscription.DatabaseName = subscriptionDbName;
                    subscription.HostName = hostname;

                    // Specify the Windows login credentials for the Merge Agent job.
                    subscription.SynchronizationAgentProcessSecurity.Login = winLogin;
                    subscription.SynchronizationAgentProcessSecurity.Password = winPassword;

                    // Enable Web synchronization.
                    subscription.UseWebSynchronization = true;
                    subscription.InternetUrl = webSyncUrl;

                    // Specify the same Windows credentials to use when connecting to the
                    // Web server using HTTPS Basic Authentication.
                    subscription.InternetSecurityMode = AuthenticationMethod.BasicAuthentication;
                    subscription.InternetLogin = winLogin;
                    subscription.InternetPassword = winPassword;

                    // Ensure that we create a job for this subscription.
                    subscription.CreateSyncAgentByDefault = true;

                    // Create the pull subscription at the Subscriber.
                    subscription.Create();

                    Boolean registered = false;

                    // Verify that the subscription is not already registered.
                    foreach (MergeSubscription existing
                        in publication.EnumSubscriptions())
                    {
                        if (existing.SubscriberName == subscriberName
                            && existing.SubscriptionDBName == subscriptionDbName
                            && existing.SubscriptionType == SubscriptionOption.Pull)
                        {
                            registered = true;
                        }
                    }
                    if (!registered)
                    {
                        // Register the local subscription with the Publisher.
                        publication.MakePullSubscriptionWellKnown(
                            subscriberName, subscriptionDbName,
                            SubscriptionSyncType.Automatic,
                            MergeSubscriberType.Local, 0);
                    }
                }
                else
                {
                    // Do something here if the publication does not exist.
                    throw new ApplicationException(String.Format(
                        "The publication '{0}' does not exist on {1}.",
                        publicationName, publisherName));
                }
            }
            catch (Exception ex)
            {
                // Implement the appropriate error handling here.
                throw new ApplicationException(String.Format(
                    "The subscription to {0} could not be created.", publicationName), ex);
            }
            finally
            {
                subscriberConn.Disconnect();
                publisherConn.Disconnect();
            }
' Define the Publisher, publication, and databases.
Dim publicationName As String = "AdvWorksSalesOrdersMerge"
Dim publisherName As String = publisherInstance
Dim subscriberName As String = subscriberInstance
Dim subscriptionDbName As String = "AdventureWorks2008R2Replica"
Dim publicationDbName As String = "AdventureWorks2008R2"
Dim hostname As String = "adventure-works\garrett1"
Dim webSyncUrl As String = "https://" + publisherInstance + "/WebSync/replisapi.dll"

'Create connections to the Publisher and Subscriber.
Dim subscriberConn As ServerConnection = New ServerConnection(subscriberName)
Dim publisherConn As ServerConnection = New ServerConnection(publisherName)

' Create the objects that we need.
Dim publication As MergePublication
Dim subscription As MergePullSubscription

Try
    ' Connect to the Subscriber.
    subscriberConn.Connect()

    ' Ensure that the publication exists and that 
    ' it supports pull subscriptions and Web synchronization.
    publication = New MergePublication()
    publication.Name = publicationName
    publication.DatabaseName = publicationDbName
    publication.ConnectionContext = publisherConn

    If publication.LoadProperties() Then
        If (publication.Attributes And PublicationAttributes.AllowPull) = 0 Then
            publication.Attributes = publication.Attributes _
            Or PublicationAttributes.AllowPull
        End If
        If (publication.Attributes And PublicationAttributes.AllowWebSynchronization) = 0 Then
            publication.Attributes = publication.Attributes _
            Or PublicationAttributes.AllowWebSynchronization
        End If

        ' Define the pull subscription.
        subscription = New MergePullSubscription()
        subscription.ConnectionContext = subscriberConn
        subscription.PublisherName = publisherName
        subscription.PublicationName = publicationName
        subscription.PublicationDBName = publicationDbName
        subscription.DatabaseName = subscriptionDbName
        subscription.HostName = hostname
        subscription.CreateSyncAgentByDefault = True

        ' Specify the Windows login credentials for the Merge Agent job.
        subscription.SynchronizationAgentProcessSecurity.Login = winLogin
        subscription.SynchronizationAgentProcessSecurity.Password = winPassword

        ' Enable Web synchronization.
        subscription.UseWebSynchronization = True
        subscription.InternetUrl = webSyncUrl

        ' Specify the same Windows credentials to use when connecting to the
        ' Web server using HTTPS Basic Authentication.
        subscription.InternetSecurityMode = AuthenticationMethod.BasicAuthentication
        subscription.InternetLogin = winLogin
        subscription.InternetPassword = winPassword

        ' Create the pull subscription at the Subscriber.
        subscription.Create()

        Dim registered As Boolean = False

        ' Verify that the subscription is not already registered.
        For Each existing As MergeSubscription In _
        publication.EnumSubscriptions()
            If existing.SubscriberName = subscriberName Then
                registered = True
            End If
        Next
        If Not registered Then
            ' Register the local subscription with the Publisher.
            publication.MakePullSubscriptionWellKnown( _
             subscriberName, subscriptionDbName, _
             SubscriptionSyncType.Automatic, _
             MergeSubscriberType.Local, 0)
        End If
    Else
        ' Do something here if the publication does not exist.
        Throw New ApplicationException(String.Format( _
         "The publication '{0}' does not exist on {1}.", _
         publicationName, publisherName))
    End If
Catch ex As Exception
    ' Implement the appropriate error handling here.
    Throw New ApplicationException(String.Format( _
     "The subscription to {0} could not be created.", publicationName), ex)
Finally
    subscriberConn.Disconnect()
    publisherConn.Disconnect()
End Try