Aplicaciones de escritorio de Windows
Collapse the table of content
Expand the table of content
EN
Este contenido no se encuentra disponible en su idioma, pero aquí tiene la versión en inglés.

CIM Classes

The Distributed Management Task Force (DMTF) Common Information Model (CIM) classes are the parent classes upon which WMI classes are built. The following table lists the categories of CIM classes.

Important  The DMTF (Distributed Management Task Force) CIM (Common Information Model) classes are the parent classes upon which WMI classes are built. WMI currently supports only the CIM 2.x version schemas. For more information on CIM, see Common Information Model.
 
CIM ClassDescription

CIM_Action

Creates a software element in its next state or eliminates the software element in the current state.

CIM_ActionSequence

Defines a series of operations that transition the software element (referenced by the CIM_SoftwareElementActions association) to its next state, or removes the software element from its current state.

CIM_ActiveConnection

Defines a connection that is currently communicating, or is configured to communicate, between two service access points.

CIM_ActsAsSpare

Indicates which elements can be spares or replace other aggregated elements.

CIM_AdjacentSlots

Describes the layout of slots on a hosting board or adapter card.

CIM_AffectedJobElement

AffectedJobElement represents an association between a CIM_Job and the CIM_ManagedElement(s) that may be affected by its execution.

CIM_AggregatePExtent

Provides summary information about addressable logical blocks, which are in the same storage redundancy group and located on the same physical media.

CIM_AggregatePSExtent

Defines the number of addressable logical blocks on a single storage device, excluding logical blocks mapped as check data.

CIM_AggregateRedundancyComponent

Describes the aggregate physical extent in a storage redundancy group.

CIM_AlarmDevice

Emits audible or visible indications related to a problem situation.

CIM_AllocatedResource

Represents an association between logical devices and system resources, and indicates that the resource is assigned to the device.

CIM_AllocationCapabilities

Extends the CIM_Capabilities class for the purposes of expressing the resource allocation capabilities of the associated managed element for the allocation of a specific resource type.

CIM_ApplicationSystem

Represents an application or software system that supports a particular business function that can be managed as an independent unit.

CIM_ApplicationSystemSoftwareFeature

Represents an association that identifies the software features that make up a particular application system.

CIM_AssociatedAlarm

Associates an alarm with a logical device.

CIM_AssociatedBattery

Associates a battery with a logical device.

CIM_AssociatedCooling

Indicates when fans or other cooling devices are specific to a device.

CIM_AssociatedMemory

Associates installed or associated memory, such as cache memory with a logical device.

CIM_AssociatedProcessorMemory

Associates the processor and system memory, or a processor cache.

CIM_AssociatedSensor

Associates an installed sensor with a logical device.

CIM_AssociatedSupplyCurrentSensor

Associates a power supply with a current (amperage) sensor that monitors its input frequency.

CIM_AssociatedSupplyVoltageSensor

Associates a power supply with a voltage sensor that monitors its input voltage.

CIM_BasedOn

Describes how storage extents can be assembled from lower-level extents.

CIM_Battery

Represents the abilities and management of the battery logical device.

CIM_BinarySensor

Provides a boolean output.

CIM_BindsTo

This association establishes a CIM_ServiceAccessPoint as a requester of protocol services from a CIM_ProtocolEndpoint.

CIM_BIOSElement

Represents the low-level software that is loaded into non-volatile storage and used to start and configure a computer system.

CIM_BIOSFeature

Represents the abilities of the low-level software that is used to start and configure a computer system.

CIM_BIOSFeatureBIOSElements

Associates a BIOS feature and its aggregated BIOS elements.

CIM_BIOSLoadedInNV

Associates a BIOS element and the non-volatile storage in which it is loaded.

CIM_BootOSFromFS

Associates the operating system and the file systems from which the operating system is loaded.

CIM_BootSAP

Represents the access points of a boot service.

CIM_BootService

Represents the functionality provided by a device or software, or by a network, to load an operating system on a unitary computer system.

CIM_BootServiceAccessBySAP

Associates a boot service and its access points.

CIM_CacheMemory

Defines the abilities and management of cache memory.

CIM_Capabilities

An abstract class whose subclasses describe abilities and/or potential for use.

CIM_Card

Represents a type of physical container that can be plugged into another card or hosting board, or is itself a hosting board/motherboard in a chassis.

CIM_CardInSlot

Associates an adapter card with the container into which it is inserted.

CIM_CardOnCard

Describes relationships about cards that can be plugged into motherboards/baseboards, daughtercards of an adapter, or cards that support special card-like modules.

CIM_CDROMDrive

Represents a CD-ROM drive on the computer.

CIM_Chassis

Represents the physical elements that enclose other elements and provide definable functionality, such as a desktop, processing node, UPS, disk or tape storage, or a combination of these.

CIM_ChassisInRack

Represents the "containing" relationship between a rack and a chassis that it contains.

CIM_Check

Represents a condition or characteristic that is expected to be true in an environment defined or scoped by an instance of a CIM_ComputerSystem class.

CIM_Chip

Represents the type of integrated circuit hardware, including ASICs, processors, memory chips, and so on.

CIM_ClusteringSAP

Represents the access points of a clustering service.

CIM_ClusteringService

Represents the functionality provided by a cluster.

CIM_ClusterServiceAccessBySAP

Represents the relationship between a clustering service and its access points.

CIM_CollectedCollections

Represents a collection of Managed System Elements (MSE) contained in a collection of MSEs.

CIM_CollectedMSEs

Represents the members of the grouping object, a CollectionOfMSEs class.

CIM_CollectionOfMSEs

Enable the grouping of CIM_ManagedSystemElement objects for the purpose of associating settings and configurations.

CIM_CollectionOfSensors

Represents the binary sensors that make up the multi-state sensor.

CIM_CollectionSetting

Represents the association between a CIM_CollectionOfMSEs and the setting class defined for them.

CIM_CompatibleProduct

Represents an association between products that conveys information, such as whether two referenced products are interoperable, can be installed together, or whether one can be the physical container for the other, and so on.

CIM_Component

Represents the parts of a relationship between MSEs.

CIM_ComputerSystem

Represents a special collection of CIM_ManagedSystemElement instances.

CIM_ComputerSystemDMA

Represents an association between a computer system and its available direct memory access (DMA) channels.

CIM_ComputerSystemIRQ

Represents an association between a computer system and its available interrupt request lines (IRQs).

CIM_ComputerSystemMappedIO

Represents an association between a computer system and its available memory-mapped I/O ports.

CIM_ComputerSystemPackage

Represents an association that explicitly defines the relationship between unitary computer systems and one or more physical packages.

CIM_ComputerSystemResource

Represents an association between a computer system and its available system resources.

CIM_ConcreteComponent

CIM_ConcreteComponent is a generic association used to establish 'part of' relationships between ManagedElements.

CIM_ConcreteJob

A concrete version of Job.

CIM_Configuration

Enables the grouping of parameter sets (defined in CIM_Setting objects) and dependencies for one or more managed system elements.

CIM_ConnectedTo

Represents an association that indicates that two or more physical connectors are connected.

CIM_ConnectorOnPackage

Represents an association that makes explicit the containment relationship between connectors and packages.

CIM_Container

Represents an association between a contained and a containing physical element.

CIM_ControlledBy

Indicates which devices are commanded by, or accessed through, the controller logical device.

CIM_Controller

Groups miscellaneous control-related devices.

CIM_CoolingDevice

Represents the abilities and management of cooling devices.

CIM_CopyFileAction

Represents moving or copying files from a computer system to a new location.

CIM_CreateDirectoryAction

Creates empty directories for software elements to be installed locally.

CIM_CurrentSensor

Exists for backward compatibility to earlier CIM Schema definitions.

CIM_DataFile

Represents a named collection of data or executable code.

CIM_Dependency

Represents an association that establishes dependency relationships between objects.

CIM_DependencyContext

Associates a CIM_Dependency class with one or more CIM_Configuration objects.

CIM_DesktopMonitor

Represents the abilities and management of the desktop monitor (CRT) logical device.

CIM_DeviceAccessedByFile

Specifies the logical device accessed by using the referenced CIM_DeviceFile class.

CIM_DeviceConnection

Represents two or more connected devices.

CIM_DeviceErrorCounts

Contains error-related counters for a logical device.

CIM_DeviceFile

Represents a type of logical file, which represents a device.

CIM_DeviceSAPImplementation

Represents an association between a service access point (SAP) and how it is implemented.

CIM_DeviceServiceImplementation

Represents an association between a service and how it is implemented.

CIM_DeviceSoftware

Identifies software that is associated with a device, such as drivers, configuration or application software, or firmware.

CIM_Directory

Represents a file type that logically groups the data files that it contains and provides path information for the grouped files.

CIM_DirectoryAction

Manages directories.

CIM_DirectoryContainsFile

Represents an association between a directory and files contained within that directory.

CIM_DirectorySpecification

Captures the major directory structure of a software element.

CIM_DirectorySpecificationFile

Represents the directory that contains the file being specified by referencing the CIM_DirectorySpecification class.

CIM_DiscreteSensor

Reports a set of legal string values.

CIM_DiskDrive

Represents a physical disk drive as seen by the operating system.

CIM_DisketteDrive

Represents the abilities and management of a diskette drive.

CIM_DiskPartition

Represents a contiguous range of logical blocks that is identifiable by the operating system by way of the partition type and subtype fields.

CIM_DiskSpaceCheck

Checks the amount of available system disk space.

CIM_Display

Groups miscellaneous display devices.

CIM_DisplayController

Represents the capabilities and management of the display controller.

CIM_DMA

Represents computer architecture direct memory access (DMA).

CIM_Docked

Represents the relationship between two chassis.

CIM_DVDDrive

Represents the capabilities and management of a DVDDrive.

CIM_DynamicForwardingEntry

Represents an entry in the forwarding (filtering) database associated with the TransparentBridgingService.

CIM_ElementAllocatedFromPool

ElementAllocatedFromPool associates an instance of CIM_LogicalElement representing an allocated Resource with the CIM_ResourcePool from which it was allocated.

CIM_ElementCapabilities

ElementCapabilities represents the association between ManagedElements and their Capabilities.

CIM_ElementCapacity

Associates a CIM_PhysicalCapacity object with one or more physical elements.

CIM_ElementConfiguration

Relates a CIM_Configuration object to one or more managed system elements.

CIM_ElementConformsToProfile

Used to associate an instance of a subclass of CIM_ManagedElement with a corresponding instance of CIM_RegisteredProfile to which the managed element belongs.

CIM_ElementSetting

Represents the association between managed system elements and the setting class defined for them.

CIM_ElementSettingData

Represents the association between managed elements and applicable setting data.

CIM_ElementsLinked

Represents physical elements that are cabled together by a physical link.

CIM_EnabledLogicalElement

Abstracts the concept of an element that is enabled and disabled, such as a logical device or a service access point.

CIM_Error

CIM_Error is a specialized class that contains information about the severity, cause, recommended actions and other data related to the failure of a CIM Operation.

CIM_ErrorCountersForDevice

Associates the CIM_DeviceErrorCounts class to the logical device to which it applies.

CIM_EthernetPort

Capabilities and management of an ethernet port.

CIM_ExecuteProgram

Represents files that can be executed on the system where the software element is installed.

CIM_Export

Represents an association between a local file system and its directories, which indicate that the specified directories are available for mount.

CIM_ExtraCapacityGroup

Indicates that the aggregated elements have more capacity or ability than is required.

CIM_Fan

Represents the abilities and management of a fan cooling device.

CIM_FileAction

Enable the author to locate files that already exist on a user computer, and then move or copy those files to a new location.

CIM_FileSpecification

Represents a file that is either on or off the system.

CIM_FileStorage

Links the file system and the logical files addressed through the file system.

CIM_FileSystem

Represents a file or data set local to a computer system or remotely mounted from a file server.

CIM_FlatPanel

Represents the abilities and management of the flat panel logical device.

CIM_ForwardingService

Represents the functions used in forwarding network traffic.

CIM_ForwardsAmong

Represents the dependency that exists between the protocol endpoints that are used to forward data and the forwarding service that is performing the forwarding of data.

CIM_FromDirectoryAction

Identifies the source directory for the file action.

CIM_FromDirectorySpecification

Identifies the source directory for the file action.

CIM_FRU

Represents a vendor-defined collection of products and physical elements that are associated with a field replaceable unit (FRU) to support, maintain, or upgrade a product at the customer location.

CIM_FRUIncludesProduct

Indicates that a FRU can be composed of other products.

CIM_FRUPhysicalElements

Represents the physical elements that make up a FRU.

CIM_HeatPipe

Represents the abilities and management of a heat pipe cooling device.

CIM_HostedAccessPoint

Represents an association between a service access point (SAP) and the system on which it is provided.

CIM_HostedBootSAP

Defines the hosting unitary computer system for a CIM_BootSAP class.

CIM_HostedBootService

Associates a hosting system and a boot service.

CIM_HostedDependency

Defines a managed element in the context of another managed element in which it resides.

CIM_HostedFileSystem

Represents a link between the computer system and the file system hosted on the computer system.

CIM_HostedJobDestination

Represents an association between a job destination and the system on which it resides.

CIM_HostedService

Represents an association between a service and the system on which the functionality resides.

CIM_IDEController

Capabilities and management of an IDE controller.

CIM_InfraredController

Represents the abilities and management of an infrared controller.

CIM_InstalledOS

Represents a link between the computer system and the installed operating system.

CIM_InstalledSoftwareElement

Associates a computer system with an installed software element.

CIM_IRQ

Represents an Intel architecture interrupt request line (IRQ).

CIM_Job

Represents a unit of work for a system.

CIM_JobDestination

Represents where a job is submitted for processing.

CIM_JobDestinationJobs

Specifies where a job is submitted for processing.

CIM_Keyboard

Represents the abilities and management of the keyboard logical device.

CIM_LANEndpoint

A communication endpoint which, when its associated interface device is connected to a LAN, may send and receive data frames. LAN endpoints include Ethernet, Token Ring, and FDDI interfaces.

CIM_LastAppliedSettingData

An association between an object and another object which has been applied to it.

CIM_LinkHasConnector

Associates cables and links used as physical connectors, which connect the physical elements.

CIM_LocalFileSystem

Represents the file store controlled by a computer system through local means (for example, direct device-driver access).

CIM_Location

Represents the position and address of a physical element.

CIM_LogicalDevice

Represents a hardware entity that may or may not be realized in physical hardware.

CIM_LogicalDisk

Represents a contiguous range of logical blocks that is identifiable by a file system through the disk DeviceID (key) field.

CIM_LogicalDiskBasedOnPartition

Associates a logical disk with the disk partition on which it resides.

CIM_LogicalDiskBasedOnVolumeSet

Relates logical disks with the volume on which they are found.

CIM_LogicalElement

Represents the parent class for all system components that represent abstract system components, such as profiles, processes, or system abilities, in the form of logical devices.

CIM_LogicalFile

Represents a named collection of data, which can be executable code, that is located in a file system on a storage extent.

CIM_LogicalIdentity

Indicates that two logical elements represent different aspects of the same underlying entity.

CIM_LogicalPort

The abstraction of a port or connection point of a device.

CIM_MagnetoOpticalDrive

Represents the abilities and management of a magneto-optical drive, a subtype of the media access device.

CIM_ManagedElement

Provides a common superclass (or top of the class hierarchy) for the non-association classes in the CIM Schema.

CIM_ManagedSystemElement

Represents the parent class for the system element hierarchy.

CIM_ManagementController

Represents the abilities and management of a management controller.

CIM_MediaAccessDevice

Represents the ability to access one or more media, and then use the media to store and retrieve data.

CIM_MediaPresent

Describes a relationship where a storage extent must be accessed through a media access device.

CIM_Memory

Represents the abilities and management of memory-related logical devices.

CIM_MemoryCapacity

Represents memory that can be installed on a physical element and its minimum and maximum configurations.

CIM_MemoryCheck

Specifies a condition for the minimum amount of memory that must be available on a system.

CIM_MemoryMappedIO

Represents computer architecture memory-mapped I/O.

CIM_MemoryOnCard

Associates physical memory located on hosting boards, adapter cards, and so on.

CIM_MemoryWithMedia

Associates physical memory with a physical media and its cartridge.

CIM_ModifySettingAction

Represents the information for modifying a specific setting file, for a specific entry, with a specific value.

CIM_MonitorResolution

Represents the relationship between horizontal and vertical resolutions and the refresh rate and scan mode for a desktop monitor.

CIM_MonitorSetting

Associates the monitor resolution with the desktop monitor to which it applies.

CIM_Mount

Represents an association between a file system and a directory to which it is attached.

CIM_MultiStateSensor

Represents a multi-member set of binary sensors where each binary sensor reports a Boolean result.

CIM_NetworkAdapter

Defines general networking hardware concepts.

CIM_NetworkPort

Represents network communications hardware such as a physical connector and the setup or operation of the network CPUs at the lowest layers of a network stack.

CIM_NetworkService

This is an abstract base class, derived from the Service class. It is deprecated in version 2.7 with the recommendation that the Service class be subclassed instead.

CIM_NFS

Represents a remote file system that is mounted, using the network file system (NFS) protocol, from a computer system.

CIM_NonVolatileStorage

Represents the abilities and management of non-volatile storage.

CIM_NumericSensor

Represents a numeric sensor that returns numeric readings and optionally supports thresholds settings.

CIM_OperatingSystem

Represents a computer operating system, which is made up of software and firmware that make a computer system hardware usable, and implements and manages the resources, file systems, processes, user interfaces, services, and so on that are available on the computer system.

CIM_OperatingSystemSoftwareFeature

Represents the software features that make up the operating system.

CIM_OSProcess

Associates the operating system and one or more processes running in the context of the operating system.

CIM_OSVersionCheck

Specifies the versions of the operating system that can support a software element.

CIM_PackageAlarm

Represents the relationship in which an alarm device is installed as part of a package.

CIM_PackageCooling

Represents the relationship in which a cooling device is installed in a package, such as a chassis or rack, to assist with the package cooling.

CIM_PackagedComponent

Represents an explicit relationship in which a component is typically contained by a physical package, such as a chassis or card.

CIM_PackageInChassis

Represents the relationship in which a chassis can contain other packages, such as other chassis and cards.

CIM_PackageInSlot

Represents the ability of complex networking devices, which are often chassis-based, to enhance or augment the base functionality by accepting additional chassis devices (similar to accepting functionality in the form of adding cards).

CIM_PackageTempSensor

Represents the relationship in which a temperature sensor is often installed in a package, such as a chassis or a rack, to monitor the package environment.

CIM_ParallelController

Represents the abilities and management of the parallel port logical device.

CIM_ParentChildSettingData

An association between an instance of CIM_VirtualSystemSettingData and the CIM_VirtualSystemSettingData instance which represents the most recent snapshot upon which this object is based.

CIM_ParticipatesInSet

Identifies physical elements that should be replaced together.

CIM_PCIController

Represents the properties and management of a PCI controller.

CIM_PCMCIAController

Represents the abilities and management of a Personal Computer Memory Card International Association (PCMCIA) controller.

CIM_PCVideoController

Represents the abilities and management of a personal computer video controller, a subtype of a video controller.

CIM_PExtentRedundancyComponent

Represents the physical extents that participate in a storage redundancy group.

CIM_PhysicalCapacity

Represents the minimum and maximum requirements of a physical element and its ability to support different types of hardware.

CIM_PhysicalComponent

Represents a low-level or basic component within a package.

CIM_PhysicalConnector

Represents any physical element that is used to connect to other elements.

CIM_PhysicalElement

Defines any component of a system that has a distinct physical identity.

CIM_PhysicalElementLocation

Associates a physical element with a CIM_Location object for inventory or replacement purposes.

CIM_PhysicalExtent

Represents an SCC RAID implementation.

CIM_PhysicalFrame

Represents a parent class of rack, chassis, and other frame enclosures as they are defined in extension classes.

CIM_PhysicalLink

Represents the cabling of physical elements.

CIM_PhysicalMedia

Represents types of documentation and storage medium, such as tapes, CD ROMs, and so on.

CIM_PhysicalMemory

Represents low-level memory devices, such as SIMMS, DIMMs, raw memory chips, and so on.

CIM_PhysicalPackage

Represents physical elements that contain or host other components.

CIM_PointingDevice

Represents a device that points to regions on the display.

CIM_PortOnDevice

Associates a port or connection point with its device.

CIM_POTSModem

Represents a device that translates binary data into wave modulations for sound-based transmission by connecting to the Plain Old Telephone System (POTS) network.

CIM_PowerSupply

Represents the abilities and management of the power supply logical device.

CIM_PreviousSettingData

An association between a virtual system and the setting data of the snapshot which is the parent to the virtual system.

CIM_Printer

Represents the abilities and management of the printer logical device.

CIM_Process

Represents a single instance of a running program.

CIM_ProcessExecutable

Represents a link between a process and data file, and indicates that the file participates in the execution of the process.

CIM_Processor

Represents the abilities and management of the processor logical device.

CIM_ProcessThread

Represents a link between a process and the threads running in the context of the process.

CIM_Product

Represents a collection of physical elements, software features and, other products, acquired as a unit.

CIM_ProductFRU

Represents an association between the product and a field replaceable unit (FRU), which provides information about product components that have been, or are being replaced.

CIM_ProductParentChild

Defines a parent-child hierarchy among products.

CIM_ProductPhysicalElements

Represents the physical elements that make up a product.

CIM_ProductProductDependency

Represents an association between two products, which indicates that one must be installed or absent for the other to function.

CIM_ProductSoftwareFeatures

Identifies the software features for a particular product.

CIM_ProductSupport

Represents an association between product and support access that conveys how support is obtained for the product.

CIM_ProtectedSpaceExtent

Represents addressable logical-block addresses, which are treated as a single storage extent, but are located on a single physical extent.

CIM_ProtocolController

A superclass for grouping controllers that are used to control the operation and function of sophisticated devices that instantiate a protocol such as SCSI. Simpler bus and device controllers are modeled using the CIM_Controller class.

CIM_ProtocolControllerForUnit

This association is used to define a relationship between a ProtocolController and an exposed Logical Unit (for example a Storage Volume or a MediaAccessDevice such as a tape drive).

CIM_ProtocolEndpoint

A communication point from which data can be sent or received. protocol endpoints link system or computer interfaces to logical networks.

CIM_PSExtentBasedOnPExtent

Associates protected space extents that are based on a physical extent.

CIM_Rack

Represents a rack (a physical frame or enclosure) in which chassis are stored.

CIM_Realizes

Represents the association that defines the mapping between a logical device and the physical component that implements the device.

CIM_RealizesAggregatePExtent

Represents the relationship in which the CIM_AggregatePExtent class is realized on a physical media.

CIM_RealizesDiskPartition

Represents a disk partition on a physical media that models the creation of partitions on a raw SCSI, SATA, or IDE drive.

CIM_RealizesPExtent

Represents the relationship in which physical extents are realized on a physical media.

CIM_RebootAction

Causes a system reboot where the software element is installed.

CIM_RedundancyComponent

Associates a redundancy group composed of managed system elements and indicates that, together, the elements provide redundancy.

CIM_RedundancyGroup

Represents a collection of managed system elements, which indicates that the aggregated components, together, provide redundancy.

CIM_ReferencedProfile

Used to associate an instance CIM_RegisteredProfile with an instance of CIM_RegisteredProfile of another profile that references the dependent profile as a related profile.

CIM_Refrigeration

Represents the abilities and management of a refrigeration cooling device.

CIM_RegisteredProfile

Used to advertise implementation conformance to a CIM profile.

CIM_RelatedStatistics

Represents hierarchies and dependencies of related CIM_StatisticalInformation classes.

CIM_RemoteFileSystem

Represents a remote file system that is accessed by way of a network-related service.

CIM_RemoveDirectoryAction

Removes directories for software elements.

CIM_RemoveFileAction

Uninstalls files.

CIM_ReplacementSet

Aggregates physical elements that must be replaced together.

CIM_ResidesOnExtent

Represents an association between a file system and the storage extent where it is located.

CIM_ResourceAllocationSettingData

Represents settings specifically related to an allocated resource that are outside the scope of the CIM class typically used to represent the resource itself.

CIM_ResourcePool

Represents a logical entity (with associated controls) provided by the host system for the purpose of allocation and assignment of resources.

CIM_RunningOS

Represents the currently executing operating system.

CIM_SAPSAPDependency

Indicates that the second SAP is required for the first SAP to connect with its service.

CIM_Scanner

Represents the abilities and management of the scanner logical device.

CIM_SCSIController

Represents the abilities and management of the SCSI controller logical device.

CIM_SCSIInterface

Represents a CIM_ControlledBy relationship that indicates which devices are accessed through a SCSI controller and the access characteristics.

CIM_SCSIProtocolController

A type of protocol controller that manages a SCSI interface.

CIM_Sensor

Represents a hardware device that is capable of measuring the characteristics of a physical property.

CIM_SerialController

Represents the abilities and management of the serial port, logical device.

CIM_SerialInterface

Represents a CIM_ControlledBy relationship that indicates which devices are accessed through the serial controller and the characteristics of the access.

CIM_Service

Represents a logical element that contains information to represent and manage the functionality provided by a device or software feature.

CIM_ServiceAccessBySAP

Represents the access points for a service.

CIM_ServiceAccessPoint

Represents the ability to use or invoke a service.

CIM_ServiceAffectsElement

Represents an association between a service and the managed elements that might be affected by its execution.

CIM_ServiceComponent

Models a set of subordinate services that are aggregated together to form a higher-level service.

CIM_ServiceSAPDependency

Represents an association between a service and a service access point (SAP), which indicates that the referenced SAP is used by the service to provide its functionality.

CIM_ServiceServiceDependency

Represents an association between two services.

CIM_Setting

Represents configuration-related and operational parameters for one or more managed system elements.

CIM_SettingCheck

Specifies information required to check a particular setting file for a specific entry that contains a value equal to the value specified.

CIM_SettingContext

Associates configuration objects with setting objects.

CIM_SettingData

Represents configuration-related and operational parameters for one or more managed elements.

CIM_SettingsDefineCapabilities

This association indicates that the non-null, non-key set of properties of the component SettingData instance specifies some capabilities of the associated Capabilities instance.

CIM_SettingsDefineState

Associates an instance of SettingData with an instance of ManagedElement.

CIM_Slot

Represents connectors into which packages are inserted.

CIM_SlotInSlot

Represents the ability of a special adapter to extend the existing slot structure to enable otherwise incompatible cards to be plugged into a frame or hosting board.

CIM_SoftwareElement

Decomposes a CIM_SoftwareFeature object into a set of individually manageable or deployable parts for a particular platform.

CIM_SoftwareElementActions

Identifies the actions for a software element.

CIM_SoftwareElementChecks

Relates a software element with condition or location information that a feature may require.

CIM_SoftwareElementVersionCheck

Represents a type of software element that must exist in the environment.

CIM_SoftwareFeature

Represents a particular function or ability of a product or application system.

CIM_SoftwareFeatureSAPImplementation

Represents an association between a service access point (SAP) and how it is implemented in software.

CIM_SoftwareFeatureServiceImplementation

Represents an association between a service and how it is implemented in software.

CIM_SoftwareFeatureSoftwareElements

Identifies the software elements that make up a specific software feature.

CIM_SpareGroup

Indicates that one or more of the aggregated elements can be spared.

CIM_StatisticalInformation

Represents a root class for the arbitrary collection of statistical data or metrics applicable to one or more managed system elements.

CIM_Statistics

Represents an association that relates managed system elements to the statistical groups that apply to them.

CIM_StorageDefect

Collects the storage errors for a storage extent.

CIM_StorageError

Represents blocks of media or memory space that are mapped out-of-use due to errors.

CIM_StorageExtent

Represents the abilities and management of the various media that exist to store data and enable data retrieval.

CIM_StorageRedundancyGroup

Represents mass storage-related redundancy information.

CIM_SupportAccess

Specifies how to obtain assistance for a product.

CIM_SwapSpaceCheck

Specifies the amount of swap space that must be available on the system.

CIM_SwitchesAmong

A switch service switches frames between switch ports. This association makes that relationship explicit.

CIM_SwitchPort

A switch port from which frames are received and out which they are transmitted. This endpoint is associated with its networking interface (such as Ethernet) through the EndpointIdentity relationship.

CIM_SwitchPortDynamicForwarding

This association links a DynamicForwardingEntry and the SwitchPort to which the entry applies.

CIM_SwitchService

Generic switch (bridging) service class. Additional switching functions are incorporated as subordinate services related to this class via ServiceComponent associations.

CIM_SwitchServiceTransparentBridging

An association that links a SwitchService to a component TransparentBridgingService. The cardinality of the TransparentBridgingService is 0..1 for a VLAN-unaware switch.

CIM_System

Aggregates an enumerable set of managed system elements.

CIM_SystemComponent

Establishes "part of" relationships between a system and the managed system elements of which it is composed.

CIM_SystemDevice

Represents an explicit relationship in which logical devices can be aggregated by a system.

CIM_SystemResource

Represents an entity managed by BIOS, or an operating system that is available for use by software and logical devices.

CIM_Tachometer

Exists for backward compatibility with earlier CIM schema definitions.

CIM_TapeDrive

Represents a tape drive on the system.

CIM_TemperatureSensor

Exists for backward compatibility with earlier CIM schema definitions.

CIM_Thread

Represents the ability to execute units of a process or task, in parallel.

CIM_ToDirectoryAction

Identifies the target directory for the file action.

CIM_ToDirectorySpecification

Identifies the target directory for the file action.

CIM_TransparentBridgingDynamicForwarding

This association links an instance of the Transparent BridgingService to the entries of its forwarding database.

CIM_TransparentBridgingService

This service class represents the learning/transparent bridging aspect of a SwitchService.

CIM_UninterruptiblePowerSupply

Represents the abilities and management of an uninterruptible power supply (UPS).

CIM_UnitaryComputerSystem

Represents a desktop, mobile, network computer, server, or other type of single-node computer system.

CIM_USBController

Represents the abilities and management of a USB controller.

CIM_USBControllerHasHub

Defines the hubs that are downstream of the USB controller.

CIM_USBDevice

Represents the management characteristics of a USB device.

CIM_USBHub

Represents the abilities and management of a USB hub.

CIM_UserDevice

Enables a computer system user to input, view, or hear data.

CIM_VersionCompatibilityCheck

Specifies whether it is permissible to create the next state of a software element.

CIM_VideoBIOSElement

Represents the low-level software that is loaded into non-volatile storage and used to configure and access a computer system video controller and display.

CIM_VideoBIOSFeature

Represents the abilities of the low-level software used to configure and access a computer system video controller and display.

CIM_VideoBIOSFeatureVideoBIOSElements

Associates a video BIOS feature and its aggregated video BIOS elements.

CIM_VideoController

Represents the abilities and management of the video controller.

CIM_VideoControllerResolution

Represents the various video modes that a video controller can support.

CIM_VideoHead

Represents one head of the CIM_DisplayController.

CIM_VideoHeadOnController

Associates a video head with the video adapter that includes it.

CIM_VideoSetting

Associates the CIM_VideoControllerResolution setting object with the controller to which it applies.

CIM_VirtualSystemManagementService

Service to control virtual systems including definition, instantiation, destruction, and modification.

CIM_VirtualSystemSettingData

Defines the virtual aspects of a virtual system.

CIM_VirtualSystemSettingDataComponent

The CIM_VirtualSystemSettingDataComponent association establishes a \'part of\' relationship between an instance of the CIM_VirtualSystemSettingData class and a set of instances of the CIM_ResourceAllocationSettingData class.

CIM_VLANEndpoint

An endpoint on a switch or endstation which is assigned to a given VLAN or accepts traffic from one or more VLANs.

CIM_VLANEndpointSettingData

The VLAN configuration data for an endpoint. Note that certain properties only apply based on the value in the VLANEndpoint.

CIM_VolatileStorage

Represents the abilities and management of volatile storage.

CIM_VoltageSensor

Exists for backward compatibility with earlier CIM schema definitions.

CIM_VolumeSet

Represents a contiguous range of logical blocks presented to the operating environment for reading and writing user data.

CIM_WORMDrive

Represents the abilities and management of a WORM drive, a subtype of the media access device.

 

 

 

Mostrar:
© 2016 Microsoft