Table of contents
TOC
Collapse the table of content
Expand the table of content

Radial controller protocol implementation

Last Updated: 2/16/2017

Windows radial controller devices are expected to use the Human Interface Device (HID) protocol to communicate with the host.

A good understanding of the HID protocol is needed to be able to understand the information presented here. See the following resources for information about the HID protocol:

Windows includes a HID class driver and corresponding HID I²C, HID USB and HID Bluetooth-enabled miniport drivers; therefore, there is no need for any third-party mini-port drivers for Windows radial controllers unless it utilizes a bus where an inbox HID mini-port driver is not available.

A device only needs to report the usages described in this topic in the firmware for a Windows radial controller device. Windows will use the firmware and its own HID drivers to enable the device and give Windows applications access to the device.

A sample descriptor is provided in the Sample Report Descriptors section.

Required HID top-level collections

A Windows radial controller device exposes, at a minimum, the single mandatory top-level collection, for radial controller input reporting. An optional (recommended) collection for firmware updates may also be implemented. The following diagram shows the HID collections for a Windows radial controller device.

a diagram showing the HID collections for a Windows radial controller device

Windows radial controller collection

Using the HID protocol, a Windows radial controller provides a top-level collection that appears as a System Multi-Axis Controller (Page 0x01, Usage 0x0E). By reporting this top-level collection and the required usages, a device appears to Windows as a radial controller.

The Windows radial controller collection provides input reporting to the host, as well as device information that pertains to those reports. The collection supports one mandatory input report for radial controller input data. An optional feature report and output report for haptic feedback may also be supported.

In this section

TopicDescription
Radial Controller Input ReportsThis topic details the HID input reports that are used for radial controller haptic feedback support in Windows 10, version 1607 and later operating systems.
Radial Controller Output ReportsThis topic details the HID output reports that are used for radial controller haptic feedback support in Windows 10, version 1607 and later operating systems.
Radial Controller Feature ReportsThis topic details the HID feature reports that are used for radial controller haptic feedback support in Windows 10, version 1607 and later operating systems.
Firmware Update CollectionThis topic discusses an optional HID top-level collection that can be used for radial controller firmware updates in Windows 10, version 1607 and later operating systems.
Sample Report DescriptorsThis topic presents a sample report descriptor and some sample descriptor excerpts for a Windows radial controller device.
© 2017 Microsoft