about_Workflows

Short description

Provides a brief introduction to the PowerShell Workflow feature.

Long description

PowerShell Workflow brings the benefits of the Windows Workflow Foundation to PowerShell and enables you to write and run workflows.

PowerShell Workflow was introduced in PowerShell 3.0 and the module is available up to PowerShell 5.1. For more information about PowerShell Workflow, see the Workflows Guide and Writing a Windows PowerShell Workflow.

About workflows

Workflows are commands that consist of an ordered sequence of related activities. Typically, they run for an extended period of time, gathering data from and making changes to hundreds of computers, often in heterogeneous environments.

Workflows can be written in XAML, the language used in Windows Workflow Foundation, or in the PowerShell language. Workflows are typically packaged in modules and include help topics. For more information, see XAML Overview (WPF).

Workflows are critical in an IT environment because they can survive reboots and recover automatically from common failures. You can disconnect and reconnect from sessions and computers running workflows without interrupting workflow processing, and suspend and resume workflows transparently without data loss. Each activity in a workflow can be logged and audited for reference. Workflows can run as jobs and can be scheduled by using the Scheduled Jobs feature of PowerShell.

The state and data in a workflow is saved or persisted at the beginning and end of the workflow and at points that you specify. Workflow persistence points work like database snapshots or program checkpoints to protect the workflow from the effects of interruptions and failures. If the workflow is unable to recover from a failure, you can use the persisted data and resume from the last persistence point, instead of rerunning an extensive workflow from the beginning.

Workflow requirements and configuration

A PowerShell Workflow configuration consists of the following elements:

  • A client computer, which runs the workflow.
  • A workflow session, PSSession, on the client computer or on a remote computer.
  • Managed nodes, the target computers that are affected by the workflow activities.

The workflow session isn't required, but is recommended. PSSessions can take advantage of the robust recovery and Disconnected Sessions features of PowerShell to recover disconnected workflow sessions. For more information, see about_Remote_Disconnected_Sessions

Because the client computer and the computer on which the workflow session runs can be managed nodes, you can run a workflow on a single computer that fulfills all roles.

The client computer and the computer on which the workflow session runs must be running PowerShell 3.0. All eligible systems are supported, including the Server Core installation options of Windows Server operating systems.

To run workflows that include cmdlets, the managed nodes must have Windows PowerShell 2.0 or later. Managed nodes don't require PowerShell unless the workflow includes cmdlets. You can run workflows that include Windows Management Instrumentation (WMI) and Common Information Model (CIM) commands on computers that don't have PowerShell.

How to get workflows

Workflows are typically packaged in modules. To import the module that includes a workflow, use any command in the module or use the Import-Module cmdlet. Modules are imported automatically on first use of any command in the module.

To find the workflows in modules installed on your computer, use the Get-Command cmdlet's CommandType parameter.

Get-Command -CommandType Workflow

How to run workflows

To run a workflow, use the following procedure.

  1. When the managed node is the local computer, this step isn't required. Otherwise, on the client computer, start PowerShell with the Run as administrator option.

    Start-Process PowerShell -Verb RunAs
    
  2. Enable PowerShell remoting on the computer that runs the workflow session and on managed nodes affected by workflows that include cmdlets.

    You only need to do this step once on each participating computer.

    This step is required only when running workflows that include cmdlets. You don't need to enable remoting on the client computer, unless the workflows session runs on the client computer, or on any managed nodes that are running PowerShell 3.0.

    To enable remoting, use the Enable-PSRemoting cmdlet.

    Enable-PSRemoting -Force
    

    You can enable remoting by using the Turn on Script Execution Group Policy setting. For more information, see about_Group_Policy_Settings and about_Execution_Policies.

  3. Use the New-PSWorkflowSession or New-PSSession cmdlets to create the workflow session.

    The New-PSWorkflowSession cmdlet starts a session that uses the built-in Microsoft.PowerShell.Workflow session configuration on the destination computer. This session configuration includes scripts, type and formatting files, and options that are designed for workflows.

    Or, use the New-PSSession cmdlet. Use the ConfigurationName parameter to specify the Microsoft.PowerShell.Workflow session configuration. This command is the same as using the New-PSWorkflowSession cmdlet.

    An alternative is to use the New-PSSession cmdlet. Use the ConfigurationName parameter to specify the Microsoft.PowerShell.Workflow session configuration.

    On the local computer:

    $ws = New-PSWorkflowSession
    

    On a remote computer:

    $ws = New-PSWorkflowSession -ComputerName Server01 `
    -Credential Domain01\Admin01
    

    If you are an Administrator on the workflow session computer, you can use the New-PSWorkflowExecutionOption cmdlet to create custom option settings for the workflow session configuration. And, use the Set-PSSessionConfiguration cmdlet to change the session configuration.

    $sto = New-PSWorkflowExecutionOption -MaxConnectedSessions 150
    Invoke-Command -ComputerName Server01 `
    {Set-PSSessionConfiguration Microsoft.PowerShell.Workflow `
    -SessionTypeOption $Using:sto}
    $ws = New-PSWorkflowSession -ComputerName Server01 `
    -Credential Domain01\Admin01
    
  4. Run the workflow in the workflow session. To specify the names of the managed nodes, target computers, use the PSComputerName workflow common parameter.

    The following examples run the workflow named Test-Workflow.

    Where the managed node is the computer that hosts the workflow session:

    Invoke-Command -Session $ws {Test-Workflow}
    

    Where the managed nodes are remote computers.

    Invoke-Command -Session $ws{
    Test-Workflow -PSComputerName Server01, Server02 }
    

    The following example runs the Test-Workflow on hundreds of computers. The Get-Content cmdlet gets the computer names from a text file and saves them in the $Servers variable on the local computer.

    Invoke-Command uses the $Using scope modifier to define the $Servers variable in the local session. For more information about the $Using scope modifier, see about_Remote_Variables.

    $Servers = Get-Content Servers.txt
    Invoke-Command -Session $ws {Test-Workflow -PSComputerName $Using:Servers }
    

Using workflow common parameters

The workflow common parameters are a set of parameters that PowerShell adds automatically to all workflows. PowerShell adds the cmdlet common parameters to all workflows, even if the workflow doesn't use the CmdletBinding attribute.

For example, the following workflow defines no parameters. However, when you run the workflow, it has both the CommonParameters and WorkflowCommonParameters.

workflow Test-Workflow {Get-Process}
Get-Command Test-Workflow -Syntax
Test-Workflow [<WorkflowCommonParameters>] [<CommonParameters>]

The workflow common parameters include several parameters that are essential to running workflows. For example, the PSComputerName common parameter specifies the managed nodes that the workflow affects.

Invoke-Command -Session $ws {
  Test-Workflow -PSComputerName Server01, Server02
}

The PSPersist workflow common parameter determines when workflow data is persisted. It enables you to add persistence point between activities to workflows that don't define persistence points.

Invoke-Command -Session $ws {
  Test-Workflow -PSComputerName Server01, Server02 -PSPersist:$True
}

Other workflow common parameters let you specify the characteristics of the remote connection to the managed nodes. Their names and functionality are similar to the parameters of remoting cmdlets, including Invoke-Command.

Invoke-Command -Session $ws {
  Test-Workflow -PSComputerName Server01, Server02 -PSPort 443
}

Take care to distinguish the remoting parameters that define the connection for the workflow session from the PS-prefixed workflow common parameters that define the connection to the managed nodes.

$ws = New-PSSession -ComputerName Server01 -ConfigurationName Microsoft.PowerShell.Workflow

Invoke-Command -Session $ws {
  Test-Workflow -PSComputerName Server01, Server02 -PSConfigurationName Microsoft.PowerShell.Workflow
}

Some workflow common parameters are unique to workflows, such as the PSParameterCollection parameter that lets you specify different workflow common parameter values for different remote nodes. For a list and description of the workflow common parameters, see about_WorkflowCommonParameters.

See also