Start-Transaction

Starts a transaction.

Syntax

Start-Transaction
     [-Timeout <Int32>]
     [-Independent]
     [-RollbackPreference <RollbackSeverity>]
     [-WhatIf]
     [-Confirm]
     [<CommonParameters>]

Description

The Start-Transaction cmdlet starts a transaction, which is a series of commands that are managed as a unit. A transaction can be completed, or committed. Alternatively, it can be completely undone, or rolled back, so that any data changed by the transaction is restored to its original state. Because the commands in a transaction are managed as a unit, either all commands are committed or all commands are rolled back.

By default, if any command in the transaction generates an error, transactions are rolled back automatically. You can use the RollbackPreference parameter to change this behavior.

The cmdlets used in a transaction must be designed to support transactions. Cmdlets that support transactions have a UseTransaction parameter. To perform transactions in a provider, the provider must support transactions. The Windows PowerShell Registry provider in Windows Vista and later versions of the Windows operating system supports transactions. You can also use the Microsoft.PowerShell.Commands.Management.TransactedString class to include expressions in transactions on any version of the Windows system that supports Windows PowerShell. Other Windows PowerShell providers can also support transactions.

Only one transaction can be active at a time. If you start a new, independent transaction while a transaction is in progress, the new transaction becomes the active transaction, and you must commit or roll back the new transaction before you make any changes to the original transaction.

Start-Transaction cmdlet is one of a set of cmdlets that support the transactions feature in Windows PowerShell. For more information, see about_Transactions.

Examples

Example 1: Start and roll back a transaction

Set-Location hkcu:\software
Start-Transaction
New-Item "ContosoCompany" -UseTransaction
New-ItemProperty "ContosoCompany" -Name "MyKey" -Value 123 -UseTransaction
Undo-Transaction

These commands start and then roll back a transaction. Because the transaction is rolled back, no changes are made to the registry.

Example 2: Start and complete a transaction

Set-Location hkcu:\software
Start-Transaction
New-Item "ContosoCompany" -UseTransaction
New-ItemProperty "ContosoCompany" -Name "MyKey" -Value 123 -UseTransaction
Complete-Transaction

These commands start and then complete a transaction. No changes are made to the registry until the Complete-Transaction command is used.

Example 3: Use different rollback preferences

Set-Location HKCU:\software
Start-Transaction
New-Item -Path "NoPath" -Name "ContosoCompany" -UseTransaction
New-Item -Path . -Name "ContosoCompany" -UseTransaction
Start-Transaction -RollbackPreference never
New-Item -Path "NoPath" -Name "ContosoCompany" -UseTransaction
New-Item -Path . -Name "ContosoCompany" -UseTransaction

# Start-Transaction (-rollbackpreference error)

Start-Transaction
New-Item -Path "NoPath" -Name "ContosoCompany" -UseTransaction
New-Item : The registry key at the specified path does not exist.

At line:1 char:9
+ new-item <<<<  -Path NoPath -Name ContosoCompany -UseTransaction

New-Item -Path . -Name "Contoso" -UseTransaction

New-Item : Cannot use transaction. The transaction has been rolled back or has timed out.
At line:1 char:9
+ New-Item <<<<  -Path . -Name ContosoCompany -UseTransaction

# Start-Transaction (-rollbackpreference never)

Start-Transaction -RollbackPreference never
New-Item -Path "NoPath" -Name "ContosoCompany" -UseTransaction

New-Item : The registry key at the specified path does not exist.
At line:1 char:9
+ New-Item <<<<  -Path NoPath -Name "ContosoCompany" -UseTransaction

New-Item -Path . -Name "ContosoCompany" -UseTransaction

Hive: HKEY_CURRENT_USER\Software
SKC  VC Name                           Property
---  -- ----                           --------
0   0 ContosoCompany                 {}
Complete-Transaction

# Succeeds

This example demonstrates the effect of changing the RollbackPreference parameter value.

In the first set of commands, Start-Transaction does not use RollbackPreference. As a result, the default value (Error) is used. When an error occurs in a transaction command, that is, the specified path does not exist, the transaction is automatically rolled back.

In the second set of commands, Start-Transaction uses RollbackPreference with a value of Never. As a result, when an error occurs in a transaction command, the transaction is still active and can be completed successfully.

Because most transactions must be performed without error, the default value of RollbackPreference is typically preferred.

Example 4: Use this cmdlet while a transaction is in progress

Set-Location HKCU:\software
Start-Transaction
New-Item "ContosoCompany" -UseTransaction
Start-Transaction
Get-Transaction
New-Item "ContosoCompany2" -UseTransaction
Complete-Transaction
Complete-Transaction
Get-Transaction

RollbackPreference   SubscriberCount   Status
------------------   ---------------   ------
Error                2                 Active

This example shows the effect of using Start-Transaction while a transaction is in progress. The effect is much like joining the transaction in progress.

Although this is a simplified command, this scenario frequently occurs when the transaction involves running a script that includes a complete transaction.

The first Start-Transaction command starts the transaction. The first New-Item command is part of the transaction.

The second Start-Transaction command adds a new subscriber to the transaction. The Get-Transaction command now returns a transaction with a subscriber count of 2. The second New-Item command is part of the same transaction.

No changes are made to the registry until the whole transaction is completed. To complete the transaction, you must enter two Complete-Transaction commands, one for each subscriber. If you were to roll back the transaction at any point, all the transaction would be rolled back for both subscribers.

Example 5: Start an independent transaction while one is in progress

Set-Location HKCU:\software
Start-Transaction
New-Item "ContosoCompany" -UseTransaction
Start-Transaction -Independent
Get-Transaction
Undo-Transaction
New-ItemProperty -Path "ContosoCompany" -Name "MyKey" -Value 123 -UseTransaction
Complete-Transaction
Get-ChildItem contoso*
Get-Transaction

RollbackPreference   SubscriberCount   Status
------------------   ---------------   ------
Error                1                 Active
Undo-Transaction
New-ItemProperty -Path "ContosoCompany" -Name "MyKey" -Value 123 -UseTransaction
MyKey
-----
123
Complete-Transaction
Get-ChildItem contoso*
Hive: HKEY_CURRENT_USER\Software
SKC  VC Name                           Property
---  -- ----                           --------
0   1 MyCompany                      {MyKey}

This example shows the effect of using the Independent parameter of Start-Transaction to start a transaction while another transaction is in progress. In this case, the new transaction is rolled back without affecting the original transaction.

Although the transactions are logically independent, because only one transaction can be active at a time, you must roll back or commit the newest transaction before resuming work on the original transaction.

The first set of commands starts a transaction. The New-Item command is part of the first transaction.

In the second set of commands, the Start-Transaction command uses the Independent parameter. The Get-Transaction command that follows shows the transaction object for the active transaction, which is the newest one. The subscriber count is equal to 1, that shows that the transactions are unrelated.

When the active transaction is rolled back by using an Undo-Transaction command, the original transaction becomes active again.

The New-ItemProperty command, which is part of the original transaction, finishes without error, and the original transaction can be completed by using the Complete-Transaction command. As a result, the registry is changed.

Example 6: Run commands that are not part of a transaction

Set-Location hkcu:\software
Start-Transaction
New-Item "ContosoCompany1" -UseTransaction
New-Item "ContosoCompany2"
New-Item "ContosoCompany3" -UseTransaction
Get-ChildItem contoso*

Hive: HKEY_CURRENT_USER\Software
SKC  VC Name                           Property
---  -- ----                           --------
0   0 ContosoCompany2                {}

Complete-Transaction
Get-ChildItem contoso*

Hive: HKEY_CURRENT_USER\Software
SKC  VC Name                           Property
---  -- ----                           --------
0   0 ContosoCompany1                     {}
0   0 ContosoCompany2                     {}
0   0 ContosoCompany3                     {}

This example demonstrates that commands that are submitted while a transaction is in progress can be included in the transaction or not included. Only commands that use the UseTransaction parameter are part of the transaction.

The first and third New-Item commands use the UseTransaction parameter. These commands are part of the transaction. Because the second New-Item command does not use the UseTransaction parameter, it is not part of the transaction.

The first Get-ChildItem command shows the effect. The second New-Item command is completed immediately, but the first and third New-Item commands are not effective until the transaction is committed.

The Complete-Transaction command commits the transaction. As a result, the second Get-ChildItem command shows that all of the new items are added to the registry.

Example 7: Roll back a transaction that does not finish in a specified time

Start-Transaction -Timeout 2

# Wait two minutes...

Get-Transaction
New-Item HKCU:\Software\ContosoCompany -UseTransaction
Start-Transaction -Timeout 2

# Wait two minutes...

Get-Transaction

RollbackPreference   SubscriberCount   Status
------------------   ---------------   -----------
Error                1                 RolledBack

New-Item HKCU:\Software\ContosoCompany -UseTransaction

New-Item : Cannot use transaction. The transaction has been rolled back or has timed out.
At line:1 char:9
+ new-item <<<<  MyCompany -UseTransaction

This command uses the Timeout parameter of Start-Transaction to start a transaction that must be completed within two minutes. If the transaction is not finished when the time-out expires, it is rolled back automatically.

When the time-out expires, you are not notified, but the Status property of the transaction object is set to RolledBack and commands that use the UseTransaction parameter fail.

Parameters

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Independent

Indicates that this cmdlet starts a transaction that is independent of any transactions in progress. By default, if you use Start-Transaction while another transaction is in progress, a new subscriber is added to the transaction in progress. This parameter has an effect only when a transaction is already in progress in the session.

By default, if you use Start-Transaction while a transaction is in progress, the existing transaction object is reused and the subscriber count is incremented. The effect is much like joining the original transaction. An Undo-Transaction command rolls back the whole the transaction. To complete the transaction, you must enter a Complete-Transaction command for each subscriber. Because most transactions that are in progress at the same time are related, the default is sufficient for most uses.

If you specify the Independent parameter, this cmdlet creates a new transaction that can be completed or undone without affecting the original transaction. However, because only one transaction can be active at a time, you must complete or roll back the new transaction before resuming work on the original transaction.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RollbackPreference

Specifies the conditions under which a transaction is automatically rolled back. The acceptable values for this parameter are:

  • Error The transaction is rolled back automatically if a terminating or non-terminating error occurs.
  • TerminatingError The transaction is rolled back automatically if a terminating error occurs.
  • Never The transaction is never rolled back automatically.

The default value is Error.

Type:RollbackSeverity
Accepted values:Error, TerminatingError, Never
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Timeout

Specifies the maximum time, in minutes, that the transaction is active. When the time-out expires, the transaction is automatically rolled back.

By default, there is no time-out for transactions that are started at the command line. When transactions are started by a script, the default time-out is 30 minutes.

Type:Int32
Aliases:TimeoutMins
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

None

You cannot pipe input to this cmdlet.

Outputs

None

This cmdlet does not generate any output.