STOR_DEVICE_CAPABILITIES_EX structure

The STOR_DEVICE_CAPABILITIES_EX structure reports device capabilities to the Storport driver in response to a capabilities query in a SCSI request block (SRB) with a function of SRB_FUNCTION_PNP. STOR_DEVICE_CAPABILITIES_EX is a subset of the DEVICE_CAPABILITIES structure containing the members relevant to storage devices.

Syntax


typedef struct _STOR_DEVICE_CAPABILITIES_EX {
  ULONG Version;
  ULONG Size;
  ULONG DeviceD1  :1;
  ULONG DeviceD2  :1;
  ULONG LockSupported  :1;
  ULONG EjectSupported  :1;
  ULONG Removeable  :1;
  ULONG DockDevice  :1;
  ULONG UniqueID  :1;
  ULONG SilentInstall  :1;
  ULONG RawDeviceOK  :1;
  ULONG SurpriseRemovalOK  :1;
  ULONG NoDisplayInUI  :1;
  ULONG DefaultWriteCacheEnabled  :1;
  ULONG Reserved0  :20;
  ULONG Address;
  ULONG UINumber;
  ULONG Reserved1[2];
} STOR_DEVICE_CAPABILITIES_EX, *PSTOR_DEVICE_CAPABILITIES_EX;

Members

Version

Specifies the version of the structure. Set to STOR_DEVICE_CAPABILITIES_EX_VERSION_1 by Storport.

Size

Specifies the size of the structure. Set to sizeof(STOR_DEVICE_CAPABILITIES_EX) by Storport.

DeviceD1

Specifies whether the device hardware supports the D1 power state. Miniport drivers set this bit to 0.

DeviceD2

Specifies whether the device hardware supports the D2 power state. Miniport drivers set this bit to 0.

LockSupported

Specifies whether the device supports physical-device locking that prevents device ejection. This member pertains to ejecting a LUN or a unit device.

EjectSupported

Specifies whether the device supports software-controlled device ejection while the system is in the PowerSystemWorking state. This member pertains to ejecting a LUN or unit device.

Removeable

Specifies whether the device can be dynamically removed from its immediate parent. If Removable is set to TRUE, the device does not belong to the same physical object as its parent.

If Removable is set to TRUE, the device is displayed in the Unplug or Eject Hardware program, unless SurpriseRemovalOK is also set to TRUE.

DockDevice

Specifies whether the device is a docking peripheral.

UniqueID

Specifies whether the device's instance ID is unique system-wide. This bit is clear if the instance ID is unique only within the scope of the bus.

SilentInstall

Specifies whether Device Manager should suppress all installation dialog boxes; except required dialog boxes such as "no compatible drivers found."

RawDeviceOK

Specifies whether the driver for the underlying bus can drive the device if there is no function driver (for example, SCSI devices in pass-through mode). This mode of operation is called raw mode.

SurpriseRemovalOK

Specifies whether the miniport driver for the device can handle the case where the device is removed before Storport can send SRB_FUNCTION_PNP with StorRemoveDevice as the PnPAction in the SCSI_PNP_REQUEST_BLOCK structure. If SurpriseRemovalOK is set to TRUE, the device can be safely removed from its immediate parent regardless of the state that its driver is in.

NoDisplayInUI

Do not display the device in the user interface. If this bit is set, the device is never displayed in the user interface, even if the device is present but fails to start. Miniport drivers do not set this bit.

DefaultWriteCacheEnabled

The storage device's write cache is enabled by default at initialization.

Reserved0

Reserved bits.

Address

LUN address of the storage unit device.

UINumber

Specifies a number associated with the device that can be displayed in the user interface. This number might be an ID value chosen to make locating the physical device easier for the user. When the UINumber is unknown, the miniport driver can set this member to its default value of 0xFFFFFFFF.

Reserved1

Reserved bits.

Remarks

When a miniport driver receives an SRB in its HwStorStartIo routine where the SRB function is SRB_FUNCTION_PNP, the SRB is formatted as a SCSI_PNP_REQUEST_BLOCK structure. If the PnPAction member of the SRB is StorQueryCapabilities, the miniport can return a STOR_DEVICE_CAPABILITIES_EX structure in the DataBuffer member of the SRB.

The eject, removal, and install characteristics for the device are set in the STOR_DEVICE_CAPABILITIES_EX structure. To support the use of this structure, the miniport must set the STOR_FEATURE_FULL_PNP_DEVICE_CAPABILITIES flag in the FeatureSupport flags member in HW_INITIALIZATION_DATA before calling StorPortInitialize.

Requirements

Version

Available starting with Windows 8.

Header

Storport.h (include Storport.h)

See also

DEVICE_CAPABILITIES
HW_INITIALIZATION_DATA
SCSI_PNP_REQUEST_BLOCK
StorPortInitialize

 

 

Send comments about this topic to Microsoft

Show: