Converged Traffic Test

This test ensures that the test adapter supports concurrent network and disk input/output (I/O).

The Converged Traffic test runs the Disk Stress test against the storage array attached to the Fibre Channel over Ethernet (FCoE) adapter while simultaneously running NTttcp to stress network traffic through the same FCoE adapter. For additional NTttcp details, see How to Use NTttcp to Test Network Performance. For Disk Stress details, please see Disk Stress (LOGO).

Test details

Associated requirements

Device.Storage.Controller.Fcoe.Interoperability

See the device hardware requirements.

Platforms

Windows Server 2012 (x64) Windows Server 2008 R2 (x64) Windows Server 2012 R2

Expected run time

~480 minutes

Categories

Certification Functional

Type

Manual

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Fibre Channel Over Ethernet Testing Prerequisites.

To schedule the Converged Traffic test in HCK Studio, after the test has been selected, you must first select a secondary machine to be the receiver of network I/O. The ReceiverIPAddress should correspond to an FCoE network port on the primary machine. It should also be reachable from the secondary test machine via a network port on the same FCoE adapter that has a storage array attached. Please ensure that the port that the test is using is not being blocked by a firewall.

Troubleshooting

For troubleshooting information, see Troubleshooting Device.Storage Testing.

More information

File list

FileLocation

logtest.vbs

<[testbinroot]>\nttest\driverstest\storage\wdk\

verify_ip_address.cmd

<[testbinroot]>\nttest\driverstest\storage\wdk\

 

 

 

Send comments about this topic to Microsoft

Show: