DF - PCI Root Port Surprise Remove Test (PCI devices only) (Certification)

Article
02/27/2017

This automated test surprise removes the test device's PCI root port. This test does the following if the test device is a descendant of the PCI bus. Otherwise, it automatically passes.

Determines the PCI root port device for the test device. The PCI root port of the test device is:
1. The device that is the immediate child of the PCI bus.
2. The device that is also the ancestor of the test device.
It surprise removes and restarts this PCI root port device 100 times or for one hour in a continuous loop.

Test details

Associated requirements	Device.DevFund.DriverFramework.KMDF.Reliability Device.DevFund.DriverFramework.UMDF.Reliability Device.DevFund.Reliability.BasicReliabilityAndPerformance Device.DevFund.Reliability.PnPIRPs See the device hardware requirements.
Platforms	Windows Server 2012 (x64) Windows Server 2008 R2 (x64) Windows Server 2012 R2
Expected run time	~60 minutes
Categories	Certification
Type	Automated

Running the test

Before you run the test, complete the test setup as described in the test requirements: Device.Fundamentals Reliability Testing Prerequisites.

Troubleshooting

For troubleshooting information, see Troubleshooting Device Fundamentals Reliability Testing by using the Windows HCK.

More information

Parameters

Parameter	Description
WDTFREMOTESYSTEM	This parameter is required only if the device under test, or one of its child devices, is a wired network adapter that does not have an IPv6 gateway address. If this parameter is required on your network, you must provide an IPv6 address that the test network adapter can ping to test network. Example: fe80::78b6:810:9c12:46cd
Wpa2PskAesSsid	This parameter is required only if the device under test or one of its child devices is a WiFi adapter. Provide the SSID of a WPA2 AES WiFi network that the test can use to test the WiFi adapter. Default value: kitstestssid
Wpa2PskPassword	This parameter is required only if the device under test or one of its child devices is a WiFi adapter. Provide password of the WPA2 AES WiFi network that is specified by using the Wpa2PskAesSsid parameter. Default value: password

WDTFREMOTESYSTEM

This parameter is required only if the device under test, or one of its child devices, is a wired network adapter that does not have an IPv6 gateway address. If this parameter is required on your network, you must provide an IPv6 address that the test network adapter can ping to test network.

Example: fe80::78b6:810:9c12:46cd

Wpa2PskAesSsid

This parameter is required only if the device under test or one of its child devices is a WiFi adapter. Provide the SSID of a WPA2 AES WiFi network that the test can use to test the WiFi adapter.

Default value: kitstestssid

Wpa2PskPassword

This parameter is required only if the device under test or one of its child devices is a WiFi adapter. Provide password of the WPA2 AES WiFi network that is specified by using the Wpa2PskAesSsid parameter.

Default value: password

Send comments about this topic to Microsoft