Passive and Active Cooling Modes

Starting with Windows 8, devices that have thermal management capabilities can expose these capabilities to the operating system through the GUID_THERMAL_COOLING_INTERFACE driver interface. The two principal driver-implemented callback routines in this interface are PassiveCooling and ActiveCooling. A driver that has passive-cooling capabilities implements the PassiveCooling routine. A driver that has active-cooling capabilities implements the ActiveCooling routine. In response to changes in computer usage or environmental conditions, the operating system calls one (or possibly both) of these routines to manage thermal levels dynamically in the hardware platform.

The Advanced Configuration and Power Interface (ACPI) enables the vendor for a hardware platform to partition the platform into regions called thermal zones. Sensor devices track the temperature in each thermal zone. When a thermal zone starts to overheat, the operating system can take actions to cool down the devices in the zone. These actions can be categorized as either passive cooling or active cooling.

To perform passive cooling, the operating system throttles one or more devices in the thermal zone to reduce the heat generated by these devices. Throttling might involve reducing the frequency of the clock that drives a device, lowering the voltage supplied to the device, or turning off a part of the device. As a rule, throttling limits device performance.

To perform active cooling, the operating system turns on a cooling device, such as a fan. Passive cooling decreases the power consumed by the devices in a thermal zone; active cooling increases power consumption.

In the design of a hardware platform, the decision to use passive cooling or active cooling is based on the physical characteristics of the hardware platform, the power source for the platform, and how the platform will be used.

Active cooling might be more straightforward to implement, but has several potential drawbacks. The addition of active cooling devices (for example, fans) might increase the cost and size of the hardware platform. The power required to run an active cooling device might reduce the time that a battery-powered platform can operate on a battery charge. Fan noise might be undesirable in some applications, and fans require ventilation.

Passive cooling is the only cooling mode available to many mobile devices. In particular, handheld computing platforms are likely to have closed cases and run on batteries. These platforms typically contain devices that can throttle performance to reduce heat generation. These devices include processors, graphics processing units (GPUs), battery chargers, and display backlights.

Handheld computing platforms typically use System on a Chip (SoC) chips that contain processors and GPUs, and the SoC hardware vendors supply the thermal management software for these devices. However, peripheral devices, such as battery chargers and display backlights, are external to SoC chips. The vendors for these devices must supply device drivers, and these drivers must provide any thermal management support that might be required for the devices. A relatively simple way for a device driver to support thermal management is to implement the GUID_THERMAL_COOLING_INTERFACE driver interface.

 

 

Send comments about this topic to Microsoft

Show: