This documentation is archived and is not being maintained.

ATM_BLLI_IE structure

Note   NDIS 5. x has been deprecated and is superseded by NDIS 6. x. For new NDIS driver development, see Network Drivers Starting with Windows Vista. For information about porting NDIS 5. x drivers to NDIS 6. x, see Porting NDIS 5.x Drivers to NDIS 6.0.

The ATM_BLLI_IE structure specifies broadband low layer information, which indicates the means that should be used for compatibility checking by an addressed entity (for example, a remote user, an interworking unit, or a high-layer function network node addressed by the calling user).

Syntax


typedef struct _ATM_BLLI_IE {
  ULONG Layer2Protocol;
  UCHAR Layer2Mode;
  UCHAR Layer2WindowSize;
  ULONG Layer2UserSpecifiedProtocol;
  ULONG Layer3Protocol;
  UCHAR Layer3Mode;
  UCHAR Layer3DefaultPacketSize;
  UCHAR Layer3PacketWindowSize;
  ULONG Layer3UserSpecifiedProtocol;
  ULONG Layer3IPI;
  UCHAR SnapId[5];
} ATM_BLLI_IE, *PATM_BLLI_IE;

Members

Layer2Protocol

Specifies the user information layer 2 protocol as one of the following values:

BLLI_L2_ISO_1745

Basic mode ISO 1745

BLLI_L2_Q921

CCITT Recommendation Q.921

BLLI_L2_X25L

CCITT Recommendation X.25, link layer

BLLI_L2_X25M

CCITT Recommendation X.25 multilink

BLLI_L2_ELAPB

Extended LAPB; for half-duplex operation

BLLI_L2_HDLC_NRM

HDLC NRM (ISO 4335)

BLLI_L2_HDLC_ABM

HDLC ABM (ISO 4335)

BLLI_L2_HDLC_ARM

HDLC ARM (ISO 4335)

BLLI_L2_LLC

LAN logical link control (ISO 8802/2)

BLLI_L2_X75

CCITT Recommendation X.75, single link procedure (SLP)

BLLI_L2_Q922

CCITT Recommendation Q.922

BLLI_L2_USER_SPECIFIED

User specified

BLLI_L2_ISO_7776

ISO 7776 DTE-DTE operation

Layer2Mode

Specifies the mode of operation for layer 2.

Layer2WindowSize

Specifies the packet window size for layer 2.

Layer2UserSpecifiedProtocol

User-specified layer 2 protocol information.

This must be a non-NULL value if BLLI_L2_USER_SPECIFIED is specified for Layer2Protocol.

Layer3Protocol

Specifies the user information layer 3 protocol as one of the following values:

BLLI_L3_X25

CCITT Recommendation X.25, packet layer

BLLI_L3_ISO_8208

ISO/IEC 8208 (X.25 packet-level protocol for data terminal equipment)

BLLI_L3_X223

X.223/ISO 8878 (use of ISO/ISO 8208 [41] and ITU-T X.25 to provide the OSI-CONS)

BLLI_L3_SIO_8473

ISO/IEC 8473 (OSI connectionless mode protocol)

BLLI_L3_T70

CCITT Recommendation T.70 minimum network layer

BLLI_L3_ISO_TR9577

ISO/IEC TR 9577 (protocol identification in the network layer)

BLLI_L3_USER_SPECIFIED

User-specified

Layer3Mode

Specifies the mode of operation for layer 3.

Layer3DefaultPacketSize

Specifies the default packet size for layer 3.

Layer3PacketWindowSize

Specifies the packet window size for layer 3.

Layer3UserSpecifiedProtocol

User-specified layer 3 protocol information.

This must be a non-NULL value if BLLI_L3_USER_SPECIFIED is specified for Layer3Protocol,

Layer3IPI

Specifies the Initial Protocol Identifier (IPI) for layer 3 as one of the following values:

BLLI_L3_IPI_SNAP

IEEE 802.1 SNAP identifier

BLLI_L3_IPI_IP

Internet Protocol (IP) identifier

SnapId

Specifies the SNAP ID

Remarks

ATM_BLLI_IE is a member of an ATM_PVC_SAP structure or an ATM_SAP structure. ATM_PVC_SAP specifies ATM-specific SAP information for a PVC. ATM_SAP specifies ATM-specific SAP information for a switched VC.

ATM_BLLI_IE is also used to specify the broadband low layer information element of an ATM UNI signaling message.

For information about the broadband low layer information element, see the User Network Interface (UNI) Specification published by the ATM Forum.

Requirements

Header

Atm.h (include Atm.h)

See also

ATM_BHLI_IE
ATM_PVC_SAP
ATM_SAP
Q2931_IE
Q2931_CALLMGR_PARAMETERS

 

 

Send comments about this topic to Microsoft

Show: