Hardware Dev Center

Collapse the table of content
Expand the table of content
Expand Minimize


Full screen video playback (FSVP) is run for 6 hours. During that period, there is no user intervention such as AC plugged in, brightness change. This test is used to check whether the system’s battery life can withstand for 6 hours with the FSVP scenario.

Test details

Associated requirements


See the system hardware requirements.


Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86

Expected run time

~360 minutes






Running the test

Before you run the test, complete the test setup as described in the test requirements: System Client Testing Prerequisites.

Follow these steps before you run the test:

  • Make sure that the AC is not plugged in.

  • Make sure that Wi-Fi is connected.

  • Make sure that the system has at least 95% charge, preferably fully charged battery.


For troubleshooting information, see Troubleshooting System Client Testing.


Video was not played in FSVP mode; an interruption occurred while the video played.

This test determines whether video is running in FSVP mode.

Do not interrupt the test while the video is running.

Screen brightness was changed.

FSVP test is run with screen brightness set to 70%.

Do not change the screen brightness while the test is running.

AC is plugged in.

AC should not be plugged in while the test is running.

Make sure that before running the test, the system battery is fully charged. Do not plug-in the AC while the test is running.

Internet is disconnected.

Make sure that the system is connected to the Internet.

Check the Wi-Fi connection and run FSVP test only if the system has a reliable Internet connection that is not disconnected during the test run.


More information




Length of time that the FSVP scenario is run.

Default value: None




Send comments about this topic to Microsoft

© 2015 Microsoft