Selective suspend in USB KMDF function drivers

This topic describes how KMDF function drivers support USB selective suspend.

If the USB driver requires features or resources that are not available in user mode, you should supply a KMDF function driver. KMDF drivers implement selective suspend by setting relevant values in a KMDF initialization structure and then supplying the appropriate callback functions. KMDF handles the details of communicating with lower drivers to suspend and resume the device.

Guidelines for selective suspend in KMDF drivers

KMDF drivers that support selective suspend must follow these guidelines:

  • A KMDF function driver must be the PPO for its device stack. By default, KMDF function drivers are the PPO.
  • A KMDF function driver that supports selective suspend can use queues that are power managed or queues that are not power managed. By default, queue objects for PPOs are power managed.

Power policy ownership and KMDF USB drivers

By default, the KMDF function driver for a USB device is the PPO for the device stack. KMDF manages selective suspend and resume on behalf of this driver.

I/O queue configuration in KMDF drivers

A KMDF function driver that supports selective suspend can use queues that are power managed or queues that are not power managed. Typically, a driver configures a queue that is not power managed to receive incoming device I/O control requests and configures one or more power-managed queues to receive read, write, and other power-dependent requests. When a request arrives at a power-managed queue, KMDF ensures that the device is in D0 before it presents the request to the driver.

If you are writing a KMDF filter driver that is layered above the PPO in the device stack, you must not use power-managed queues. The reason is the same as for UMDF drivers. The framework does not present requests from power-managed queues while the device is suspended, so the use of such queues could stall the device stack.

Selective suspend mechanism for KMDF function drivers

KMDF handles most of the work that is required to support USB selective suspend. It keeps track of I/O activity, manages the idle timer, and sends the device I/O control requests that cause the parent driver (Usbhub.sys or Usbccgp.sys) to suspend and resume the device.

If a KMDF function driver supports selective suspend, KMDF tracks the I/O activity on all power-managed queues that each device object owns. The framework starts an idle timer whenever the I/O count reaches zero. The default time-out value is 5 seconds.

If an I/O request arrives at a power-managed queue that belongs to the device object before the idle time-out period expires, the framework cancels the idle timer and does not suspend the device.

When the idle timer expires, KMDF issues the requests that are required to put the USB device in the suspended state. If a function driver uses a continuous reader on a USB endpoint, the reader’s repeated polling does not count as activity toward the KMDF idle timer. However, in the EvtDeviceD0Exit callback function, the USB driver must manually stop the continuous reader and any other I/O targets that are fed by queues that are not power managed to ensure that the driver does not send I/O requests while the device is not in the working state. To stop the targets, the driver calls WdfIoTargetStop and specifies WdfIoTargetWaitForSentIoToComplete as the target action. In response, the framework stops the I/O target only after all I/O requests that are in the target’s I/O queue have been completed and any associated I/O completion callbacks have run.

By default, KMDF transitions the device out of D0 and into the device power state that the driver specified in the idle settings. As part of the transition, KMDF calls the driver’s power callback functions in the same way that it would for any other power-down sequence.

After the device has been suspended, the framework automatically resumes the device when any of the following events occur:

To resume the device, KMDF sends a power-up request down the device stack and then invokes the driver’s callback functions in the same way that it would for any other power-up sequence.

For detailed information about the callbacks that are involved in the power-down and power-up sequences, see “Plug and Play and Power Management in WDF Drivers” on the WHDC Web site.

Supporting USB selective suspend in a KMDF function driver

To implement USB selective suspend in a KMDF function driver:

  • Initialize power policy settings that are related to idle, including idle time-out.
  • Optionally include logic to temporarily prevent suspension or resume operation when the driver determines that the device should not be suspended because of an open handle or other reason that is not related to the device’s I/O queues.
  • In a USB driver for a human interface device (HID), indicate in the INF that it supports selective suspend.

Initializing Power Policy Settings in a KMDF Function Driver

To configure support for USB selective suspend, a KMDF driver uses the WDF_DEVICE_POWER_POLICY_IDLE_SETTINGS structure. The driver must first initialize the structure and can then set fields that provide details about the capabilities of the driver and its device. Typically, the driver fills in this structure in its EvtDriverDeviceAdd or EvtDevicePrepareHardware function.

To initialize the WDF_DEVICE_POWER_POLICY_IDLE_SETTINGS structure

After the driver creates the device object, the driver uses the WDF_DEVICE_POWER_POLICY_IDLE_SETTINGS_INIT function to initialize the structure. This function takes two arguments:

  • A pointer to the WDF_DEVICE_POWER_POLICY_IDLE_SETTINGS structure to initialize.
  • An enumeration value that indicates support for selective suspend. The driver should specify IdleUsbSelectiveSuspend.

If the driver specifies IdleUsbSelectiveSuspend, the function initializes the structure’s members as follows:

  • IdleTimeout is set to IdleTimeoutDefaultValue (currently 5000 milliseconds or 5 seconds).
  • UserControlOfIdleSettings is set to IdleAllowUserControl .
  • Enabled is set to WdfUseDefault, which indicates that selective suspend is enabled but a user can disable it if the UserControlOfIdleSettings member permits it.
  • DxState is set to PowerDeviceMaximum, which uses the reported power capabilities for the device to determine the state to which to transition the idle device.

To configure USB selective suspend

After the driver initializes the WDF_DEVICE_POWER_POLICY_IDLE_SETTINGS structure, the driver can set other fields in the structure and then call WdfDeviceAssignS0IdleSettings to pass these settings to the framework. The following fields apply to USB function drivers:

  • IdleTimeout—The interval, in milliseconds, that must elapse without receiving an I/O request before the framework considers the device idle. The driver can specify a ULONG value or can accept the default.
  • UserControlOfIdleSettings—Whether the user can modify the device’s idle settings. Possible values are IdleDoNotAllowUserControl and IdleAllowUserControl.
  • DxState—The device power state to which the framework suspends the device. Possible values are PowerDeviceD1, PowerDeviceD2, and PowerDeviceD3.

    USB drivers should not change the initial setting of this value. The WDF_DEVICE_POWER_POLICY_IDLE_SETTINGS_INIT function sets this value to PowerDeviceMaximum, which ensures that the framework chooses the correct value based on the device capabilities.

The following code snippet is from the Osrusbfx2 sample driver’s Device.c file:


WDF_DEVICE_POWER_POLICY_IDLE_SETTINGS idleSettings;
NTSTATUS    status = STATUS_SUCCESS;
//
// Initialize the idle policy structure.
//
WDF_DEVICE_POWER_POLICY_IDLE_SETTINGS_INIT(&idleSettings, 
     IdleUsbSelectiveSuspend);
idleSettings.IdleTimeout = 10000; // 10 sec

status = WdfDeviceAssignS0IdleSettings(Device, &idleSettings);
if ( !NT_SUCCESS(status)) {
     TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
                 "WdfDeviceSetPowerPolicyS0IdlePolicy failed %x\n", 
                 status);
    return status;
}



In the example, the driver calls WDF_DEVICE_POWER_POLICY_IDLE_SETTINGS_INIT, specifying IdleUsbSelectiveSuspend. The driver sets IdleTimeout to 10,000 milliseconds (10 seconds) and accepts the framework defaults for DxState and UserControlOfIdleSettings. As a result, the framework transitions the device to the D3 state when it is idle and creates a Device Manager property page that allows users with administrator privilege to enable or disable device idle support. The driver then calls WdfDeviceAssignS0IdleSettings to enable idle support and register these settings with the framework.

A driver can call WdfDeviceAssignS0IdleSettingsany time after it creates the device object. Although most drivers call this method initially from the EvtDriverDeviceAdd callback, this might not always be possible or even desirable. If a driver supports multiple devices or device versions, the driver might not know all device capabilities until it queries the hardware. Such drivers can postpone calling WdfDeviceAssignS0IdleSettings until the EvtDevicePrepareHardware callback.

At any time after its initial call to WdfDeviceAssignS0IdleSettings, the driver can change the idle time-out value and the device state in which the device idles. To change one or more settings, the driver simply initializes another WDF_DEVICE_POWER_POLICY_IDLE_SETTINGS structure as described earlier and calls WdfDeviceAssignS0IdleSettings again.

Preventing USB device suspension

Sometimes, a USB device should not be powered down even if no I/O requests are present within the time-out period—typically when a handle is open to the device or the device is charging. A USB driver can prevent the framework from suspending an idle device in such situations by calling WdfDeviceStopIdle and calling WdfDeviceResumeIdle when it is again acceptable for the device to be suspended.

WdfDeviceStopIdle stops the idle timer. If the IdleTimeout period has not expired and the device has not yet been suspended, the framework cancels the idle timer and does not suspend the device. If the device has already been suspended, the framework returns the device to the working state. WdfDeviceStopIdledoes not prevent the framework from suspending the device when the system changes to an Sx sleep state. Its only effect is to prevent device suspension while the system is in the S0 working state. WdfDeviceResumeIdle restarts the idle timer. These two methods manage a reference count on the device, so if the driver calls WdfDeviceStopIdle several times, the framework does not suspend the device until the driver has called WdfDeviceResumeIdle the same number of times. A driver must not call WdfDeviceResumeIdlewithout first calling WdfDeviceStopIdle.

Including a registry key (HID drivers only)

KMDF upper filter drivers for USB HID devices must indicate in the INF that they support selective suspend so that the Microsoft-supplied HIDClass.sys port driver can enable selective suspend for the HID stack. The INF should include an AddReg directive that adds the SelectiveSuspendEnabled key and set its value to 1, as the following string shows:


HKR,,"SelectiveSuspendEnabled",0x00000001,0x1

For an example, see Hidusbfx2.inx in the WDK at %WinDDK%\BuildNumber\Src\Hid\ Hidusbfx2\sys.

Remote wake support for KMDF drivers

As with selective suspend, KMDF incorporates support for wakeup, so that a USB device can trigger a wake signal while the device is idle and the system is in the working state (S0) or in a sleep state (S1–S4). In KMDF terms, these two features are called “wake from S0” and “wake from Sx,” respectively.

For USB devices, wakeup merely indicates that the device itself can initiate the transition from a lower-power state to the working state. Thus, in USB terms, wake from S0 and wake from Sx are the same, and are called “remote wake.”

KMDF USB function drivers do not require any code to support wake from S0 because KMDF provides this capability as part of the selective suspend mechanism. However, to support remote wake when the system is in Sx, a function driver must:

KMDF drivers typically configure wake support at the same time that they configure support for USB selective suspend in the EvtDriverDeviceAdd or EvtDevicePrepareHardware function.

Checking device capabilities

Before a KMDF USB function driver initializes its power policy settings for idle and wake, it should verify that the device supports remote wake. To get information about device hardware features, the driver initializes a WDF_USB_DEVICE_INFORMATION structure and calls WdfUsbTargetDeviceRetrieveInformation, typically in its EvtDriverDeviceAdd or EvtDevicePrepareHardware callback.

In the call to WdfUsbTargetDeviceRetrieveInformation, the driver passes a handle to the device object and a pointer to the initialized WDF_USB_DEVICE_INFORMATION structure. Upon successful return from the function, the Traits field of the structure contains flags that indicate whether the device is self-powered, can operate at high speed, and supports remote wake.

The following example from the Osrusbfx2 KMDF sample shows how to call this method to determine whether a device supports remote wake. After these lines of code have run, the waitWakeEnable variable contains TRUE if the device supports remote wake and FALSE if it does not:


    WDF_USB_DEVICE_INFORMATION          deviceInfo;
// Retrieve USBD version information, port driver capabilities and device
// capabilites such as speed, power, etc.
//

WDF_USB_DEVICE_INFORMATION_INIT(&deviceInfo);

status = WdfUsbTargetDeviceRetrieveInformation(
                            pDeviceContext->UsbDevice,
                            &deviceInfo);
waitWakeEnable = deviceInfo.Traits & WDF_USB_DEVICE_TRAIT_REMOTE_WAKE_CAPABLE;


Enabling remote wakeup

In USB terminology, a USB device is enabled for remote wakeup when its DEVICE_REMOTE_WAKEUP feature is set. According to the USB specification, host software must set the remote wakeup feature on a device “only just prior” to putting the device to sleep. The KMDF function driver is required only to initialize the wake settings. KMDF and the Microsoft-supplied USB bus drivers issue the I/O requests and handle the hardware manipulation that is required to enable remote wakeup.

To initialize wake settings

  1. Call WDF_DEVICE_POWER_POLICY_WAKE_SETTINGS_INIT to initialize a WDF_DEVICE_POWER_POLICY_WAKE_SETTINGS structure. This function sets the structure's Enabled member to WdfUseDefault, sets the DxState member to PowerDeviceMaximum, and sets the UserControlOfWakeSettings member to WakeAllowUserControl.
  2. Call WdfDeviceAssignSxWakeSettings with the initialized structure. As a result, the device is enabled to wake from the D3 state and the user can enable or disable the wake signal from the device property page in Device Manager.

The following code snippet from the Osrusbfx2 sample shows how to initialize wake settings to their default values:


WDF_DEVICE_POWER_POLICY_WAKE_SETTINGS wakeSettings;

WDF_DEVICE_POWER_POLICY_WAKE_SETTINGS_INIT(&wakeSettings);
status = WdfDeviceAssignSxWakeSettings(Device, &wakeSettings);
if (!NT_SUCCESS(status)) {
    return status;
}


For USB devices that support selective suspend, the underlying bus driver prepares the device hardware to wake. Consequently, USB function drivers rarely require an EvtDeviceArmWakeFromS0 callback. The framework sends a selective suspend request to the USB bus driver when the idle time-out expires.

For the same reason, USB function drivers rarely require a EvtDeviceWakeFromS0Triggered or EvtDeviceWakeFromSxTriggered callback. Instead, the framework and the underlying bus driver handle all requirements for returning the device to the working state.

Related topics

Selective suspend in USB drivers (WDF)

 

 

Send comments about this topic to Microsoft

Show: