Hardware Dev Center

Collapse the table of content
Expand the table of content
Expand Minimize

WLAN D2 Sleep - Functional

This test validates the D2 sleep functionality. Device should enter the D2 state after pressing the power button for two minutes and then return to D0 after five minutes.

Test details

Associated requirements

Device.Network.WLAN.Base.MeetScanAndConnReq Device.Network.WLAN.CSBBase.MeetScanAndConnReq Device.Network.WLAN.CSBNLO.SupportNetworkListOffload Device.Network.WLAN.NLO.SupportNetworkListOffload

See the device hardware requirements.

Platforms

Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86

Expected run time

~12 minutes

Categories

Certification Functional

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.

Devices that support InstantGo will automatically pass the test.

Troubleshooting

For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.

More information

Command syntax

ParameterDescription

TestDeviceSupports5ghz

If the device supports 5 GHz network, this will be set to true.

Default value: True

AP1IPAddress

The IP address of the WAN port of the first physical access point.

Default value: 192.168.2.2

AP1Password

The root password for the first physical access point.

Default value: password

AP2IPAddress

The IP address of the WAN port of the second physical access point.

Default value: 192.168.2.3

AP2Password

The root password for the second physical access point.

Default value: password

 

 

 

Community Additions

ADD
Show:
© 2015 Microsoft