Hardware Dev Center

Collapse the table of content
Expand the table of content
Expand Minimize

DF - PNP Rebalance Request New Resources Device Test (Functional)

This test uses EDT filter driver to try and cause IRP_MN_STOP_DEVICE to be sent to target device stacks. It also manipulates the resource requirements of devices to maximize the chances that new resources are allocated to devices.

For information included in the Windows Driver Kit on this test, see PnP Tests (Device Fundamentals) (Windows Drivers).

Test details

Associated requirements

Device.DevFund.Reliability.Discretional

See the device hardware requirements.

Platforms

Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 Windows Server 2012 R2

Expected run time

~3 minutes

Categories

Functional

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Device.Fundamentals Reliability Testing Prerequisites.

Troubleshooting

For troubleshooting information, see Troubleshooting Device Fundamentals Reliability Testing by using the Windows HCK.

More information

Parameters

ParameterDescription

WDTFREMOTESYSTEM

This parameter is required only if the device under test, or one of its child devices, is a wired network adapter that does not have an IPv6 gateway address. If this parameter is required on your network, you must provide an IPv6 address that the test network adapter can ping to test network.

Example: fe80::78b6:810:9c12:46cd

Wpa2PskAesSsid

This parameter is required only if the device under test or one of its child devices is a WiFi adapter. Provide the SSID of a WPA2 AES WiFi network that the test can use to test the WiFi adapter.

Default value: kitstestssid

Wpa2PskPassword

This parameter is required only if the device under test or one of its child devices is a WiFi adapter. Provide password of the WPA2 AES WiFi network that is specified by using the Wpa2PskAesSsid parameter.

Default value: password

 

 

 

Community Additions

ADD
Show:
© 2015 Microsoft