Information
The topic you requested is included in another documentation set. For convenience, it's displayed below. Choose Switch to see the topic in its original location.

SetupInstallFromInfSection function

[This function is available for use in the operating systems indicated in the Requirements section. It may be altered or unavailable in subsequent versions. SetupAPI should no longer be used for installing applications. Instead, use the Windows Installer for developing application installers. SetupAPI continues to be used for installing device drivers.]

The SetupInstallFromInfSection function carries out all the directives in an INF file Install section.

If the registry or file is modified, the caller of this function is required have privileges to write into the system or target directory.

Syntax


BOOL SetupInstallFromInfSection(
   HWND              Owner,
   HINF              InfHandle,
   PCTSTR            SectionName,
   UINT              Flags,
   HKEY              RelativeKeyRoot,
   PCTSTR            SourceRootPath,
   UINT              CopyFlags,
   PSP_FILE_CALLBACK MsgHandler,
   PVOID             Context,
   HDEVINFO          DeviceInfoSet,
   PSP_DEVINFO_DATA  DeviceInfoData
);

Parameters

Owner

Optional pointer to the window handle to the window that owns any dialog boxes that are generated during installation, such as for disk prompting or file copying. If Owner is not specified, these dialog boxes become top-level windows.

InfHandle

Handle to the INF file that contains the section to be processed.

SectionName

Name of the Install section in the INF file to process.

Flags

Controls what actions to perform. The flags can be a combination of the following values.

SPINST_INIFILES

Perform INI-file operations (UpdateInis, UpdateIniFields lines in the Install section being processed).

SPINST_REGISTRY

Perform registry operations (AddReg, DelReg lines in the Install section being processed).

SPINST_INI2REG

Perform INI-file to registry operations (Ini2Reg lines in the Install section being processed).

SPINST_LOGCONFIG

This flag is only used when installing a device driver.

Perform logical configuration operations (LogConf lines in the Install section being processed). This flag is only used if DeviceInfoSet and DeviceInfoData are specified.

For more information about installing device drivers, LogConf, DeviceInfoSet, or DeviceInfoData, see the DDK Programmer's Guide.

SPINST_FILES

Perform file operations (CopyFiles, DelFiles, RenFiles lines in the Install section being processed).

SPINST_ALL

Perform all installation operations.

SPINST_REGISTERCALLBACKAWARE

When using the RegisterDlls INF directive to self-register DLLs on Windows 2000, callers of SetupInstallFromInfSection may receive notifications on each file as it is registered or unregistered. To send a SPFILENOTIFY_STARTREGISTRATION or SPFILENOTIFY_ENDREGISTRATION notification to the callback routine, include SPINST_REGISTERCALLBACKAWARE plus either SPINST_REGSVR or SPINST_UNREGSVR. The caller must also set the MsgHandler parameter.

SPINST_REGSVR

To send a notification to the callback routine when registering a file, include SPINST_REGISTERCALLBACKAWARE plus SPINST_REGSVR in Flags. The caller must also specify the MsgHandler parameter.

SPINST_UNREGSVR

To send a notification to the callback routine when unregistering a file, include SPINST_REGISTERCALLBACKAWARE plus SPINST_UNREGSVR in the Flags. The caller must also specify the MsgHandler parameter.

RelativeKeyRoot

Optional parameter that must be specified if Flags includes SPINST_REGISTRY or SPINST_INI2REG. Handle to a registry key to be used as the root when the INF file specifies HKR as the key. Note that this parameter is ignored if SetupInstallFromInfSection is called with the optional DeviceInfoSet and DeviceInfoData set.

SourceRootPath

Source root for file copies. An example would be A:\ or \\pegasus\win\install. If Flags includes SPINST_FILES, and SourceRootPath is NULL, the system provides a default root path.

CopyFlags

Optional parameter that must be specified if Flags includes SPINST_FILES. Specifies flags to be passed to the SetupQueueCopySection function when files are queued for copy. These flags may be a combination of the following values.

SP_COPY_DELETESOURCE

Delete the source file upon successful copy. The caller is not notified if the delete fails.

SP_COPY_REPLACEONLY

Copy the file only if doing so would overwrite a file at the destination path.

SP_COPY_NEWER_OR_SAME

Examine each file being copied to see if its version resources indicate that it is either the same version or not newer than an existing copy on the target.

The file version information used during version checks is that specified in the dwFileVersionMS and dwFileVersionLS members of a VS_FIXEDFILEINFO structure, as filled in by the version functions. If one of the files does not have version resources, or if they have identical version information, the source file is considered newer.

If the source file is not equal in version or newer, and CopyMsgHandler is specified, the caller is notified and may cancel the copy. If CopyMsgHandler is not specified, the file is not copied.

SP_COPY_NEWER_ONLY

Examine each file being copied to see if its version resources indicate that it is not newer than an existing copy on the target. If the source file is newer but not equal in version to the existing target, the file is copied.

SP_COPY_NOOVERWRITE

Check whether the target file exists, and, if so, notify the caller who may veto the copy. If CopyMsgHandler is not specified, the file is not overwritten.

SP_COPY_NODECOMP

Do not decompress the file. When this flag is set, the target file is not given the uncompressed form of the source name (if appropriate). For example, copying f:/x86\cmd.ex_ to \\install\temp results in a target file of \\install\temp\cmd.ex_. If the SP_COPY_NODECOMP flag was not specified, the file would be decompressed and the target would be called \\install\temp\cmd.exe. The filename part of DestinationName, if specified, is stripped and replaced with the filename of the source file. When SP_COPY_NODECOMP is specified, no language or version information can be checked.

SP_COPY_LANGUAGEAWARE

Examine each file being copied to see if its language differs from the language of any existing file already on the target. If so, and CopyMsgHandler is specified, the caller is notified and may cancel the copy. If CopyMsgHandler is not specified, the file is not copied.

SP_COPY_SOURCE_ABSOLUTE

SourceFile is a full source path. Do not look it up in the SourceDisksNames section of the INF file.

SP_COPY_SOURCEPATH_ABSOLUTE

SourcePathRoot is the full path part of the source file. Ignore the relative source specified in the SourceDisksNames section of the INF file for the source media where the file is located. This flag is ignored if SP_COPY_SOURCE_ABSOLUTE is specified.

SP_COPY_FORCE_IN_USE

If the target exists, behave as if it is in use and queue the file for copying on the next system reboot.

SP_COPY_IN_USE_NEEDS_REBOOT

If the file was in use during the copy operation inform the user that the system needs to be rebooted. This flag is only used when later calling SetupPromptReboot or SetupScanFileQueue.

SP_COPY_NOSKIP

Do not give the user the option to skip a file.

SP_COPY_FORCE_NOOVERWRITE

Check whether the target file exists, and, if so, the file is not overwritten. The caller is not notified.

SP_COPY_FORCE_NEWER

Examine each file being copied to see if its version resources (or time stamps for non-image files) indicate that it is not newer than an existing copy on the target. If the file being copied is not newer, the file is not copied. The caller is not notified.

SP_COPY_WARNIFSKIP

If the user tries to skip a file, warn them that skipping a file may affect the installation. (Used for system-critical files.)

MsgHandler

Pointer to the callback routine. The callback routine must be in the format of FileCallback. See Notifications for more information.

This parameter is optional only if the Flags parameter does not include SPINST_FILES, SPINST_REGISTERCALLBACKAWARE plus SPINST_REGSVR, or SPINST_UNREGSVR.

MsgHandler must be set if Flags includes SPINST_FILES. In this case, notification is sent to the callback routine when the file queue is committed with SetupCommitFileQueue.

MsgHandler must be set if Flags includes SPINST_REGISTERCALLBACKAWARE plus SPINST_REGSVR or SPINST_UNREGSVR. In this case a SPFILENOTIFY_STARTREGISTRATION or SPFILENOTIFY_ENDREGISTRATION is sent to the callback routine once each time a file is registered or unregistered using the RegisterDlls INF directive on Windows 2000.

Context

Value to be passed to the callback function when the file queue built by this routine internally is committed via SetupCommitFileQueue. The Context parameter is optional only if the Flags parameter does not include SPINST_FIlLES. This parameter must be specified if Flags includes SPINST_FIlLES.

DeviceInfoSet

Optional pointer to a handle to a device information set. For more information about the Device Installer setup functions, see the DDK Programmer's Guide.

DeviceInfoData

Optional pointer to a pointer to the SP_DEVINFO_DATA structure that provides a context to a specific element in the set specified by DeviceInfoSet. For more information about the Device Installer setup functions, see the DDK Programmer's Guide.

Return value

If the function succeeds, the return value is a nonzero value.

If the function fails, the return value is zero. To get extended error information, call GetLastError.

Remarks

If a UNC directory is specified as the target directory of a file copy operation, you must ensure it exists before you call SetupInstallFromInfSection. The setup functions do not check for the existence of and do not create UNC directories. If the target UNC directory does not exist, the file installation will fail.

This function requires a Windows INF file. Some older INF file formats may not be supported.

Requirements

Minimum supported client

Windows XP [desktop apps only]

Minimum supported server

Windows Server 2003 [desktop apps only]

Header

Setupapi.h

Library

Setupapi.lib

DLL

Setupapi.dll

Unicode and ANSI names

SetupInstallFromInfSectionW (Unicode) and SetupInstallFromInfSectionA (ANSI)

See also

Overview
Functions
SPFILENOTIFY_STARTREGISTRATION
SPFILENOTIFY_ENDREGISTRATION
SetupInstallServicesFromInfSection

 

 

Show: