Error Codes

Windows Image Acquisition (WIA) functions and methods can return error codes from the following list:

Error CodeMeaningCode
WIA_ERROR_BUSYThe device is busy. Close any apps that are using this device or wait for it to finish and then try again.0x80210006
WIA_ERROR_COVER_OPENOne or more of the device’s cover is open.0x80210016
WIA_ERROR_DEVICE_COMMUNICATIONCommunication with the WIA device failed. Make sure that the device is powered on and connected to the PC. If the problem persists, disconnect and reconnect the device.0x8021000A
WIA_ERROR_DEVICE_LOCKEDThe device is locked. Close any apps that are using this device or wait for it to finish and then try again.0x8021000D
WIA_ERROR_EXCEPTION_IN_DRIVERThe device driver threw an exception.0x8021000E
WIA_ERROR_GENERAL_ERRORAn unknown error has occurred with the WIA device.0x80210001
WIA_ERROR_INCORRECT_HARDWARE_SETTINGThere is an incorrect setting on the WIA device.0x8021000C
WIA_ERROR_INVALID_COMMANDThe device doesn't support this command.0x8021000B
WIA_ERROR_INVALID_DRIVER_RESPONSEThe response from the driver is invalid.0x8021000F
WIA_ERROR_ITEM_DELETEDThe WIA device was deleted. It's no longer available.0x80210009
WIA_ERROR_LAMP_OFFThe scanner's lamp is off.0x80210017
WIA_ERROR_MAXIMUM_PRINTER_ENDORSER_COUNTERA scan job was interrupted because an Imprinter/Endorser item reached the maximum valid value for WIA_IPS_PRINTER_ENDORSER_COUNTER, and was reset to 0. This feature is available with Windows 8 and later versions of Windows.0x80210021
WIA_ERROR_MULTI_FEEDA scan error occurred because of a multiple page feed condition. This feature is available with Windows 8 and later versions of Windows.0x80210020
WIA_ERROR_OFFLINEThe device is offline. Make sure the device is powered on and connected to the PC.0x80210005
WIA_ERROR_PAPER_EMPTYThere are no documents in the document feeder.0x80210003
WIA_ERROR_PAPER_JAMPaper is jammed in the scanner's document feeder.0x80210002
WIA_ERROR_PAPER_PROBLEMAn unspecified problem occurred with the scanner's document feeder.0x80210004
WIA_ERROR_WARMING_UPThe device is warming up.0x80210007
WIA_ERROR_USER_INTERVENTIONThere is a problem with the WIA device. Make sure that the device is turned on, online, and any cables are properly connected.0x80210008
WIA_S_NO_DEVICE_AVAILABLENo scanner device was found. Make sure the device is online, connected to the PC, and has the correct driver installed on the PC.0x80210015

 

 

 

Show: