RAMgmtPSProvider Provider
This section provides reference information for RAMgmtPSProvider provider classes defined in RAMgmtPSProvider.mof and implemented in RAMgmtPSProvider.dll.
In this section
- ASPathSegment
-
Retrieves Border Gateway Protocol (BGP) routing information about a path segment to an autonomous system (AS).
- BgpCustomNetworkInfo
-
Retrieves the network configuration of a custom Border Gateway Protocol (BGP) network.
- BgpMessageStatistics
-
Retrieves the statistics of a Border Gateway Protocol (BGP) message.
- BgpPeerConfig
-
Retrieves information about a peer configuration of a Border Gateway Protocol (BGP) router.
- BgpRouteAggregateConfig
-
Contains BGP route-aggregation configuration information.
- BgpRouteCounter
-
Retrieves counters for Border Gateway Protocol (BGP) routes.
- BgpRouteInfo
-
Retrieves the configuration of a Border Gateway Protocol (BGP) route.
- BgpRouteFlapDampeningConfig
-
Contains BGP route-flap-dampening configuration information.
- BgpRouterConfig
-
Retrieves the routing domain configuration of a Border Gateway Protocol (BGP) router.
- BgpRoutingPolicyConfig
-
Retrieves the policy configuration of a Border Gateway Protocol (BGP) router.
- BgpStatistics
-
Retrieves BGP peering message and route advertisement statistics.
- CIM_Error
-
CIM_Error is a specialized class that contains information about the severity, cause, recommended actions and other data related to the failure of a CIM Operation. Instances of this type MAY be included as part of the response to a CIM Operation.
- DAAppServer
-
DirectAccess application server class
- DAAppServerConnection
-
DirectAccess application server connection class.
- DAClient
-
DirectAccess Client class.
- DAClientDnsConfiguration
-
Direct Access Client DNS Configuration class
- DAClientEntrypoint
-
DirectAccess client entry point specific settings class
- DAClientSettings
-
DirectAccess Client Settings class.
- DADomainController
-
DirectAccess Domain Controller Settings class.
- DAEntryPoint
-
DirectAccess Entry Point Settings class.
- DAEntryPointBase
-
DirectAccess Entry Point Base Settings object.
- DAMgmtChangedHost
-
Changed host
- DAMgmtHost
-
Host information.
- DAMgmtHostEx
-
Extended host information
- DAMgmtServer
-
Management server class
- DAMultiSite
-
DirectAccess Multi Site Settings class
- DANetworkLocationServer
-
DirectAccess Network Location Server settings
- DAOtpAuthentication
-
Describes the DirectAccess OTP settings.
- DAServer
-
DirectAccess Server Settings
- DAServerConfiguration
-
DirectAccess Server Configuration
- DirectAccessConfiguration
-
Remote Access DirectAccess Configuration.
- DnsClientNrptGlobal
-
Contains the global settings for the DNS Client Name Resolution Policy table.
- DnsClientNrptRule
-
Contains a table entry for a DNS client name resolution policy.
- GREMultiTenantS2SInterface
-
Represents the multi-tenant S2S GRE interface
- GRES2SInterface
-
Represents the S2S GRE interface
- InterfaceIpFilter
-
Represents an IP filter interface
- MSFT_WmiError
-
A Windows error object that encapsulates what is in CIM_Error as well as includes error code, errorCategory, errorMessage and errorType.
- MultiTenantVpnIPAddressRange
-
Represents an IP address range in a routing domain on a multi-tenant VPN
- ProtocolMetric
-
Manages protocol metrics
- ProtocolPreference
-
Routing protocol preference
- PS_BgpRouteAggregate
-
Holds the route aggregation properties of BGP routes.
- PS_BgpCustomRoute
-
Admin configured static routes.
- PS_BgpPeer
-
Manages Border Gateway Protocol (BGP) sessions between peers.
- PS_BgpRouteFlapDampening
-
Contains the BGP route flap dampening engine configuration.
- PS_BgpRoute
-
Retrieves Border Gateway Protocol (BGP) routes from the local BGP routing table.
- PS_BgpRouter
-
Manages a Border Gateway Protocol (BGP) router.
- PS_BgpRoutingPolicy
-
BGP routing policy management
- PS_BgpRoutingPolicyForPeer
-
Assigns BGP routing policies to BGP peers.
- PS_BgpStatistics
-
Retrieves Border Gateway Protocol (BGP) message and route statistics.
- PS_DAAppServer
-
Represents the application servers in a DA deployment.
- PS_DAAppServerConnection
-
Refers to the properties of the connection made to the application servers and other servers in corpnet.
- PS_DAClient
-
Represents the client machines in a DA deployment.
- PS_DAClientDnsConfiguration
-
Represents all the name resolution configuration for a DirectAccess deployment.
- PS_DAEntryPoint
-
Describes a entry point which belongs to a multisite deployment.
- PS_DAEntryPointDC
-
DAEntryPointDC Object.
- PS_DAMgmtServer
-
Represents the Management Server configuration in a DirectAccess deployment.
- PS_DAMultiSite
-
Represents configuration of multisite environment.
- PS_DANetworkLocationServer
-
Represents the Network Location Server configuration of the DirectAccess.
- PS_DAOtpAuthentication
-
Describes the OTP authentication configuration for DirectAccess.
- PS_DAServer
-
Represents the configuration specific to the DirectAccess server.
- PS_IPFilter
-
Manages IP filter actions for a Border Gateway Protocol (BGP) router interface.
- PS_RemoteAccess
-
Represents installation of both DirectAccess and VPN and configuration common to both.
- PS_RemoteAccessAccounting
-
Represents the various types of accounting supported for Remote Access.
- PS_RemoteAccessConfiguration
-
Represents the remote access configuration.
- PS_RemoteAccessConnectionStatistics
-
Refers to the real-time connection stats and stats based on accounting data.
- PS_RemoteAccessConnectionStatisticsSummary
-
Refers to the summary of active (real-time) and accounting statistics for connections.
- PS_RemoteAccessHealth
-
Health of Remote Access cluster, server (DA and VPN) and its components
- PS_RemoteAccessInboxAccountingStore
-
Represents the configuration of the store used for inbox accounting.
- PS_RemoteAccessLoadBalancer
-
Represents load balancing configuration for Remote Access.
- PS_RemoteAccessLoadBalancerNode
-
Represents the servers in a load balancing cluster.
- PS_RemoteAccessRadius
-
Represents the configuration of the accounting and authentication RADIUS servers
- PS_RemoteAccessRoutingDomain
-
Manages Remote Access settings for routing domain configurations.
- PS_RemoteAccessUserActivity
-
Refers to the resources in corpnet accessed by a user over a remote access connection
- PS_RoutingProtocolPreference
-
Manages routing protocol preferences.
- PS_VpnAuthProtocol
-
Refers to various VPN authentication protocols.
- PS_VpnAuthType
-
Represent the authentication type for VPN
- PS_VpnIPAddressAssignment
-
Represents IP address assignment configuration for VPN
- PS_VpnIPAddressRange
-
Represents the IP address range from which IP addresses are assigned to VPN clients
- PS_VpnS2SInterface
-
Represents a site-to-site VPN interface.
- PS_VpnS2SInterfaceStatistics
-
Refers to statistics of an IKEv2 S2S connection.
- PS_VpnServerIPsecConfiguration
-
Represents an Internet Protocol Security (IPsec) VPN server configuration.
- PS_VpnSstpProxyRule
-
Holds the SSTP Proxy configuration functions.
- PS_VpnTrafficSelector
-
Provides a method to create a new traffic selector.
- PS_VpnUser
-
Indicates the user policy operations performed on VPN user
- RemoteAccess
-
Remote Access Configuration
- RemoteAccessAccounting
-
Remote Access Accounting Configuration
- RemoteAccessAccountingConnection
-
Remote Access Accounting Connection Record
- RemoteAccessAccountingSummary
-
Remote Access Connection Statistics Summary Record From Accounting Data
- RemoteAccessBgpPeerConfig
-
Manages a Border Gateway Protocol (BGP) Peer Connection State.
- RemoteAccessCommon
-
Describes the Remote Access common configuration.
- RemoteAccessConfiguration
-
Manages a Remote Access configuration
- RemoteAccessConnection
-
Remote Access Common Connection Info Record
- RemoteAccessConnectionSummary
-
Remote Access Connection Statistics Summary Record
- RemoteAccessCore
-
Remote Access Core Configuration
- RemoteAccessDA
-
Remote Access configuration consisting of the DirectAccess Configuration and the Remote Access common configuration
- RemoteAccessError
-
An extended error object that contains the error details of the RemoteAccess cmdlets. It inherits from the MSFT_WmiError and extends it by adding the following fields to the error object
- RemoteAccessHealthHeuristic
-
Remote Access Health Heuristic
- RemoteAccessHealthMonitor
-
Remote Access Health Monitor
- RemoteAccessInboxAccounting
-
Remote Access Inbox Accounting Configuration Record
- RemoteAccessLoadBalancer
-
Remote Access Load Balancing configuration
- RemoteAccessLoadBalancerNode
-
Remote Access Load Balancer Node object
- RemoteAccessMonitoringConnection
-
Remote Access Monitoring Connection Record
- RemoteAccessMonitoringSummary
-
Remote Access Connection Statistics Summary Record From Monitoring Data
- RemoteAccessRadiusAccounting
-
Remote Access Radius Accounting configuration Record
- RemoteAccessRadiusConfig
-
Manages a Remote Authentication Dial-In User Service (RADIUS) server configuration.
- RemoteAccessRadiusServer
-
Represents a Remote Authentication Dial-In User Service (RADIUS) server
- RemoteAccessRadiusServerPurpose
-
Contains the Name and Purpose of a Radius Server
- RemoteAccessRoutingDomainConfiguration
-
A Remote Access routing domain configuration
- RemoteAccessS2SConfiguration
-
Retrieves and Updates a Remote Access site-to-site (S2S) interface configuration.
- RemoteAccessServerAuthConfiguration
-
The server authentication configuration for the Remote Access service
- RemoteAccessUserActivity
-
Remote Access User Activity object
- RemoteAccessVpn
-
Remote Access VPN configuration consisting of the Remote Access common configuration
- RoutingDomainConfiguration
-
Retrieves and updates a routing domain configuration for the Remote Access service.
- VirtualPrivateNetworkConfiguration
-
Virtual Private Network Configuration
- VpnAuth
-
Virtual Private Network (VPN) authentication settings
- VpnAuthProtocol
-
Represents an authorization protocol for an site-to-site (S2S) VPN service.
- VpnIPAddressAssignment
-
Virtual Private Network (VPN) IP address assignment policy
- VpnIPAddressRange
-
Virtual Private Network (VPN) IP address range object
- VpnMultiTenancy
-
Represents a site-to-site (S2S) VPN multi-tenant configuration
- VpnRoutingDomainConfig
-
Represents a site-to-site (S2S) VPN routing domain configuration
- VpnRoutingDomainCustomConfig
-
Represents a custom Internet Protocol Security (IPsec) configuration for a routing domain
- VpnRoutingDomainDefaultConfig
-
Represents the default routing domain IPsec configuration
- VpnS2SCustomInterface
-
Represents the S2S VPN custom interface.
- VpnS2SDefaultInterface
-
Represents the S2S VPN default interface.
- VpnS2SInterface
-
Represents the S2S VPN interface.
- VpnS2SInterfaceStatistics
-
Represents the VPN S2S interface statistics
- VpnS2SMultiTenantCustomInterface
-
Represents a custom site-to-site (S2S) VPN interface for a multi-tenant gateway.
- VpnS2SMultiTenantDefaultInterface
-
Represents the default site-to-site (S2S) VPN interface for a multi-tenant gateway.
- VpnS2SMultiTenantInterfaceStatistics
-
Retrieves statistics for a site-to-site (S2S) VPN interface to a multi-tenant gateway.
- VpnServerIPsecConfiguration
-
Represents a VPN server Internet Protocol Security (IPsec) configuration
- VpnServerIPsecCustomConfiguration
-
Represents the VPN server custom IPsec configuration.
- VpnServerIPsecDefaultConfiguration
-
Represents the VPN server default IPsec configuration.
- VpnSstpProxyRule
-
Configuration information for the BGP Router admin network
- VpnTrafficSelector
-
Describes the VPN traffic selector
- VSIDConfiguration
-
The configuration of a Virtual Subnet ID (VSID).