ONEX_REASON_CODE enumeration (dot1x.h)
The ONEX_REASON_CODE enumerated type specifies the possible values that indicate the reason that 802.1X authentication failed.
Syntax
typedef enum _ONEX_REASON_CODE {
ONEX_REASON_CODE_SUCCESS = 0,
ONEX_REASON_START,
ONEX_UNABLE_TO_IDENTIFY_USER,
ONEX_IDENTITY_NOT_FOUND,
ONEX_UI_DISABLED,
ONEX_UI_FAILURE,
ONEX_EAP_FAILURE_RECEIVED,
ONEX_AUTHENTICATOR_NO_LONGER_PRESENT,
ONEX_NO_RESPONSE_TO_IDENTITY,
ONEX_PROFILE_VERSION_NOT_SUPPORTED,
ONEX_PROFILE_INVALID_LENGTH,
ONEX_PROFILE_DISALLOWED_EAP_TYPE,
ONEX_PROFILE_INVALID_EAP_TYPE_OR_FLAG,
ONEX_PROFILE_INVALID_ONEX_FLAGS,
ONEX_PROFILE_INVALID_TIMER_VALUE,
ONEX_PROFILE_INVALID_SUPPLICANT_MODE,
ONEX_PROFILE_INVALID_AUTH_MODE,
ONEX_PROFILE_INVALID_EAP_CONNECTION_PROPERTIES,
ONEX_UI_CANCELLED,
ONEX_PROFILE_INVALID_EXPLICIT_CREDENTIALS,
ONEX_PROFILE_EXPIRED_EXPLICIT_CREDENTIALS,
ONEX_UI_NOT_PERMITTED
} ONEX_REASON_CODE, PONEX_REASON_CODE;
Constants
ONEX_REASON_CODE_SUCCESSValue: 0 Indicates the 802.1X authentication was a success. |
ONEX_REASON_STARTIndicates the start of the range that specifies the possible values for 802.1X reason code. |
ONEX_UNABLE_TO_IDENTIFY_USERThe 802.1X module was unable to identify a set of credentials to be used. An example is when the authentication mode is set to user, but no user is logged on. |
ONEX_IDENTITY_NOT_FOUNDThe EAP module was unable to acquire an identity for the user. Thus value is not currently used. All EAP-specific errors are returned as ONEX_EAP_FAILURE_RECEIVED. |
ONEX_UI_DISABLEDTo proceed with 802.1X authentication, the system needs to request user input, but the user interface is disabled. On Windows Vista and on Windows Server 2008, this value can be returned if an EAP method requested user input for a profile for Guest or local machine authentication. On Windows 7 and on Windows Server 2008 R2 with the Wireless LAN Service installed, this value should not be returned. |
ONEX_UI_FAILUREThe 802.1X authentication module was unable to return the requested user input. On Windows 7 and on Windows Server 2008 R2 with the Wireless LAN Service installed, this value can be returned if an EAP method requested user input, but the UI could not be displayed (the network icon was configured to not show in the taskbar, for example). |
ONEX_EAP_FAILURE_RECEIVEDThe EAP module returned an error code. The ONEX_EAP_ERROR structure may contain additional information about the specific EAP error (a certificate not found, for example). |
ONEX_AUTHENTICATOR_NO_LONGER_PRESENTThe peer with which the 802.1X module was negotiating is no longer present or is not responding (a laptop client moved out of range of the wireless access point, for example). |
ONEX_NO_RESPONSE_TO_IDENTITYNo response was received to an EAP identity response packet. This value indicates a problem with the infrastructure (a link between the wireless access point and the authentication server is not functioning, for example). |
ONEX_PROFILE_VERSION_NOT_SUPPORTEDThe 802.1X module does not support this version of the profile. |
ONEX_PROFILE_INVALID_LENGTHThe length member specified in the 802.1X profile is invalid. |
ONEX_PROFILE_DISALLOWED_EAP_TYPEThe EAP type specified in the 802.1X profile is not allowed for this media. An example is when the keyed MD5 algorithm is used for wireless transmission. |
ONEX_PROFILE_INVALID_EAP_TYPE_OR_FLAGThe EAP type or EAP flags specified in the 802.1X profile are not valid. An example is when EAP type is not installed on the system. |
ONEX_PROFILE_INVALID_ONEX_FLAGSThe 802.1X flags specified in the 802.1X profile are not valid. |
ONEX_PROFILE_INVALID_TIMER_VALUEOne or more timer values specified in the 802.1X profile is out of its valid range. |
ONEX_PROFILE_INVALID_SUPPLICANT_MODEThe supplicant mode specified in the 802.1X profile is not valid. |
ONEX_PROFILE_INVALID_AUTH_MODEThe authentication mode specified in the 802.1X profile is not valid. |
ONEX_PROFILE_INVALID_EAP_CONNECTION_PROPERTIESThe EAP connection properties specified in the 802.1X profile are not valid. |
ONEX_UI_CANCELLEDUser input was canceled. This value can be returned if an EAP method requested user input, but the user hit the Cancel button or dismissed the user input dialog. This value is supported on Windows 7 and on Windows Server 2008 R2 with the Wireless LAN Service installed. |
ONEX_PROFILE_INVALID_EXPLICIT_CREDENTIALSThe saved user credentials are not valid. This value can be returned if a profile was saved with bad credentials (an incorrect password, for example), since the credentials are not tested until the profile is actually used to establish a connection. This value is supported on Windows 7 and on Windows Server 2008 R2 with the Wireless LAN Service installed. |
ONEX_PROFILE_EXPIRED_EXPLICIT_CREDENTIALSThe saved user credentials have expired. This value can be returned if a profile was saved with credentials and the credentials subsequently expired (password expiration after some period of time, for example). This value is supported on Windows 7 and on Windows Server 2008 R2 with the Wireless LAN Service installed. |
ONEX_UI_NOT_PERMITTEDUser interface is not permitted. On Windows 7 and on Windows Server 2008 R2 with the Wireless LAN Service installed, this value can be returned if an EAP method requested user input and the profile is configured with user credentials saved by another user and not the currently logged in user. This value is supported on Windows 7 and on Windows Server 2008 R2 with the Wireless LAN Service installed. |
Remarks
The ONEX_REASON_CODE enumerated type is used by the 802.1X module, a new wireless configuration component supported on Windows Vista and later.
The ONEX_RESULT_UPDATE_DATA contains information on a status change to 802.1X authentication. The ONEX_RESULT_UPDATE_DATA structure is returned when the NotificationSource member of the WLAN_NOTIFICATION_DATA structure is WLAN_NOTIFICATION_SOURCE_ONEX and the NotificationCode member of the WLAN_NOTIFICATION_DATA structure for received notification is OneXNotificationTypeResultUpdate. For this notification, the pData member of the WLAN_NOTIFICATION_DATA structure points to an ONEX_RESULT_UPDATE_DATA structure that contains information on the 802.1X authentication status change.
The oneXStatus member of the ONEX_RESULT_UPDATE_DATA structure contains an ONEX_STATUS structure. If an error occurred during 802.1X authentication, the dwReason member of this ONEX_STATUS structure contains the reason for the error specified as a value from the ONEX_REASON_CODE enumeration.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows Vista [desktop apps only] |
| Minimum supported server | Windows Server 2008 [desktop apps only] |
| Header | dot1x.h |
See also
Feedback
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback.
Submit and view feedback for