WinBioCaptureSample function

Captures a biometric sample and fills a biometric information record (BIR) with the raw or processed data.

Syntax


HRESULT WINAPI WinBioCaptureSample(
  _In_       WINBIO_SESSION_HANDLE SessionHandle,
  _In_       WINBIO_BIR_PURPOSE Purpose,
  _In_       WINBIO_BIR_DATA_FLAGS Flags,
  _Out_opt_  WINBIO_UNIT_ID *UnitId,
  _Outptr_result_bytebuffer_maybenull_(*SampleSize)PWINBIO_BIR *Sample,
  _Out_opt_  SIZE_T *SampleSize,
  _Out_opt_  WINBIO_REJECT_DETAIL *RejectDetail
);

Parameters

SessionHandle [in]

A WINBIO_SESSION_HANDLE value that identifies an open biometric session. Open a synchronous session handle by calling WinBioOpenSession. Open an asynchronous session handle by calling WinBioAsyncOpenSession.

Purpose [in]

A WINBIO_BIR_PURPOSE bitmask that specifies the intended use of the sample. This can be a bitwise OR of the following values:

  • WINBIO_PURPOSE_VERIFY
  • WINBIO_PURPOSE_IDENTIFY
  • WINBIO_PURPOSE_ENROLL
  • WINBIO_PURPOSE_ENROLL_FOR_VERIFICATION
  • WINBIO_PURPOSE_ENROLL_FOR_IDENTIFICATION
Flags [in]

A value that specifies the type of processing to be applied to the captured sample. This can be a bitwise OR of the following security and processing level flags:

WINBIO_DATA_FLAG_PRIVACY (Encrypt the sample.)
WINBIO_DATA_FLAG_INTEGRITY (Sign the sample or protect it by using a message authentication code (MAC).)
WINBIO_DATA_FLAG_SIGNED (If this flag and the WINBIO_DATA_FLAG_INTEGRITY flag are set, sign the sample. If this flag is not set but the WINBIO_DATA_FLAG_INTEGRITY flag is set, compute a MAC.)
WINBIO_DATA_FLAG_RAW (Return the sample exactly as it was captured by the sensor.)
WINBIO_DATA_FLAG_INTERMEDIATE (Return the sample after it has been cleaned and filtered.)
WINBIO_DATA_FLAG_PROCESSED (Return the sample after it is ready to be used for the purpose specified by the Purpose parameter.)
UnitId [out, optional]

A pointer to a WINBIO_UNIT_ID value that contains the ID of the biometric unit that generated the sample.

Sample

Address of a variable that receives a pointer to a WINBIO_BIR structure that contains the sample. When you have finished using the structure, you must pass the pointer to WinBioFree to release the memory allocated for the sample.

SampleSize [out, optional]

A pointer to a SIZE_T value that contains the size, in bytes, of the WINBIO_BIR structure returned in the Sample parameter.

RejectDetail [out, optional]

A pointer to a WINBIO_REJECT_DETAIL value that contains additional information about the failure to capture a biometric sample. If the capture succeeded, this parameter is set to zero. The following values are defined for fingerprint capture:

  • WINBIO_FP_TOO_HIGH
  • WINBIO_FP_TOO_LOW
  • WINBIO_FP_TOO_LEFT
  • WINBIO_FP_TOO_RIGHT
  • WINBIO_FP_TOO_FAST
  • WINBIO_FP_TOO_SLOW
  • WINBIO_FP_POOR_QUALITY
  • WINBIO_FP_TOO_SKEWED
  • WINBIO_FP_TOO_SHORT
  • WINBIO_FP_MERGE_FAILURE

Return value

If the function succeeds, it returns S_OK. If the function fails, it returns an HRESULT value that indicates the error. Possible values include, but are not limited to, those in the following table. For a list of common error codes, see Common HRESULT Values.

Return codeDescription
E_ACCESSDENIED

The caller does not have permission to capture raw samples, or the session was not opened by using the WINBIO_FLAG_RAW flag.

E_HANDLE

The session handle is not valid.

E_NOTIMPL

The biometric unit does not support the requested operation.

E_POINTER

The UnitId, Sample, SampleSize, and RejectDetail pointers cannot be NULL.

WINBIO_E_ENROLLMENT_IN_PROGRESS

The operation could not be completed because the biometric unit is currently being used for an enrollment transaction (system pool only).

 

Remarks

To call this function successfully, you must open the session handle by specifying WINBIO_FLAG_RAW in the Flags parameter of the WinBioOpenSession or WinBioAsyncOpenSession functions. Currently, only applications running under the Administrators and Local System accounts have the necessary privileges.

Valid combinations of the Purpose and Flags parameters depend on the capabilities of the biometric unit being used. Consult the vendor's sensor documentation to determine which combinations of valid Purpose and Flags values are supported and how they affect the captured data. After you are finished using the sample, your application must call WinBioFree to release the memory allocated for it by the WinBioCaptureSample function.

To use WinBioCaptureSample synchronously, call the function with a session handle created by calling WinBioOpenSession. The function blocks until a sample has been captured or an error is encountered. Calls to WinBioCaptureSample using the system pool will block until the calling application has window focus and the user provides a sample to one of the sensors in the pool. If the sensor chosen by the user is already being used for an enrollment transaction, the function fails and returns WINBIO_E_ENROLLMENT_IN_PROGRESS.

To use WinBioCaptureSample asynchronously, call the function with a session handle created by calling WinBioAsyncOpenSession. The framework allocates a WINBIO_ASYNC_RESULT structure and uses it to return information about operation success or failure. If the capture operation is successful, the framework returns information about the sample in a nested CaptureSample structure. If the operation is unsuccessful, the framework returns error information. The WINBIO_ASYNC_RESULT structure is returned to the application callback or to the application message queue, depending on the value you set in the NotificationMethod parameter of the WinBioAsyncOpenSession function:

  • If you choose to receive completion notices by using a callback, you must implement a PWINBIO_ASYNC_COMPLETION_CALLBACK function and set the NotificationMethod parameter to WINBIO_ASYNC_NOTIFY_CALLBACK.
  • If you choose to receive completion notices by using the application message queue, you must set the NotificationMethod parameter to WINBIO_ASYNC_NOTIFY_MESSAGE. The framework returns a WINBIO_ASYNC_RESULT pointer to the LPARAM field of the window message.

To prevent memory leaks, you must call WinBioFree to release the WINBIO_ASYNC_RESULT structure after you have finished using it.

Windows 7:  You can perform this operation asynchronously by using the WinBioCaptureSampleWithCallback function. The function verifies the input arguments and returns immediately. If the input arguments are not valid, the function returns an error code. Otherwise, the framework starts the operation on another thread. When the asynchronous operation completes or encounters an error, the framework sends the results to the PWINBIO_CAPTURE_CALLBACK function implemented by your application.

Examples

The following function calls WinBioCaptureSample to capture a biometric sample from a user. Link to the Winbio.lib static library and include the following header files:

  • Windows.h
  • Stdio.h
  • Conio.h
  • Winbio.h

HRESULT CaptureSample()
{
    HRESULT hr = S_OK;
    WINBIO_SESSION_HANDLE sessionHandle = NULL;
    WINBIO_UNIT_ID unitId = 0;
    WINBIO_REJECT_DETAIL rejectDetail = 0;
    PWINBIO_BIR sample = NULL;
    SIZE_T sampleSize = 0;

    // Connect to the system pool. 
    hr = WinBioOpenSession( 
            WINBIO_TYPE_FINGERPRINT,    // Service provider
            WINBIO_POOL_SYSTEM,         // Pool type
            WINBIO_FLAG_RAW,            // Access: Capture raw data
            NULL,                       // Array of biometric unit IDs
            0,                          // Count of biometric unit IDs
            WINBIO_DB_DEFAULT,          // Default database
            &sessionHandle              // [out] Session handle
            );
    if (FAILED(hr))
    {
        wprintf_s(L"\n WinBioOpenSession failed. hr = 0x%x\n", hr);
        goto e_Exit;
    }

    // Capture a biometric sample.
    wprintf_s(L"\n Calling WinBioCaptureSample - Swipe sensor...\n");
    hr = WinBioCaptureSample(
            sessionHandle,
            WINBIO_NO_PURPOSE_AVAILABLE,
            WINBIO_DATA_FLAG_RAW,
            &unitId,
            &sample,
            &sampleSize,
            &rejectDetail
            );
    if (FAILED(hr))
    {
        if (hr == WINBIO_E_BAD_CAPTURE)
        {
            wprintf_s(L"\n Bad capture; reason: %d\n", rejectDetail);
        }
        else
        {
            wprintf_s(L"\n WinBioCaptureSample failed. hr = 0x%x\n", hr);
        }
        goto e_Exit;
    }

    wprintf_s(L"\n Swipe processed - Unit ID: %d\n", unitId);
    wprintf_s(L"\n Captured %d bytes.\n", sampleSize);


e_Exit:
    if (sample != NULL)
    {
        WinBioFree(sample);
        sample = NULL;
    }

    if (sessionHandle != NULL)
    {
        WinBioCloseSession(sessionHandle);
        sessionHandle = NULL;
    }

    wprintf_s(L"\n Press any key to exit...");
    _getch();

    return hr;
}



Requirements

Minimum supported client

Windows 7 [desktop apps only]

Minimum supported server

Windows Server 2008 R2 [desktop apps only]

Header

Winbio.h (include Winbio.h)

Library

Winbio.lib

DLL

Winbio.dll

See also

WinBioCaptureSampleWithCallback

 

 

Community Additions

ADD
Show:
© 2015 Microsoft