PIBIO_SENSOR_FINISH_CAPTURE_FN callback function (winbio_adapter.h)

Called by the Windows Biometric Framework to wait for the completion of a capture operation initiated by the SensorAdapterStartCapture function.

Syntax

PIBIO_SENSOR_FINISH_CAPTURE_FN PibioSensorFinishCaptureFn;

HRESULT PibioSensorFinishCaptureFn(
  [in, out] PWINBIO_PIPELINE Pipeline,
  [out]     PWINBIO_REJECT_DETAIL RejectDetail
)
{...}

Parameters

[in, out] Pipeline

Pointer to a WINBIO_PIPELINE structure associated with the biometric unit performing the operation.

[out] RejectDetail

Pointer to a WINBIO_REJECT_DETAIL value that receives additional information about the failure to capture a biometric sample. If the operation succeeded, this parameter is set to zero. The following values are defined for fingerprint samples:

• WINBIO_FP_TOO_HIGH
• WINBIO_FP_TOO_LOW
• WINBIO_FP_TOO_LEFT
• WINBIO_FP_TOO_RIGHT
• WINBIO_FP_TOO_FAST
• WINBIO_FP_TOO_SLOW
• WINBIO_FP_POOR_QUALITY
• WINBIO_FP_TOO_SKEWED
• WINBIO_FP_TOO_SHORT
• WINBIO_FP_MERGE_FAILURE

Return value

If the function succeeds, it returns S_OK. If the function fails, it returns an HRESULT value that indicates the error. The following values will be recognized by the Windows Biometric Framework.

Remarks

The Windows Biometric Framework calls this function after it successfully calls SensorAdapterStartCapture or it calls SensorAdapterCancel. It does not call this function if the call to SensorAdapterStartCapture fails.

When your implementation of this function returns, the data in the pipeline should be ready for subsequent calls to functions such as SensorAdapterPushDataToEngine or SensorAdapterExportSensorData.

This is a blocking function that should return only after the sensor I/O operation has succeeded, failed, or been canceled. Typically, you will make this function block by passing the OVERLAPPED structure in the sensor adapter context to the GetOverlappedResult function. The hEvent handle in the OVERLAPPED structure must be signaled when SensorAdapterFinishCapture returns. The GetOverlappedResult function sets this handle automatically when it detects the end of a sensor I/O operation. If your adapter uses some other mechanism to detect I/O completion, you must signal the event yourself.

Examples

The following pseudocode shows one possible implementation of this function. The example does not compile. You must adapt it to suit your purpose.

//////////////////////////////////////////////////////////////////////////////////////////
//
// SensorAdapterFinishCapture
//
// Purpose:
//      Waits for the completion of a capture operation initiated by the 
//      SensorAdapterStartCapture function.
//      
// Parameters:
//      Pipeline     -  Pointer to a WINBIO_PIPELINE structure associated with 
//                      the biometric unit.
//      RejectDetail -  Pointer to a WINBIO_REJECT_DETAIL value that receives 
//                      additional information about the failure to capture a 
//                      biometric sample.
//
static HRESULT
WINAPI
SensorAdapterFinishCapture(
    __inout PWINBIO_PIPELINE Pipeline,
    __out PWINBIO_REJECT_DETAIL RejectDetail
    )
{
    HRESULT hr = S_OK;
    WINBIO_SENSOR_STATUS sensorStatus = WINBIO_SENSOR_FAILURE;
    WINBIO_CAPTURE_PARAMETERS captureParameters = {0};
    BOOL result = TRUE;
    DWORD bytesReturned = 0;

    // Verify that pointer arguments are not NULL.
    if (!ARGUMENT_PRESENT(Pipeline) ||
        !ARGUMENT_PRESENT(RejectDetail))
    {
        hr = E_POINTER;
        goto cleanup;
    }

    // Retrieve the context from the pipeline.
    PWINBIO_SENSOR_CONTEXT sensorContext = 
             (PWINBIO_SENSOR_CONTEXT)Pipeline->SensorContext;

    // Verify the state of the pipeline.
    if (sensorContext == NULL || 
        Pipeline->SensorHandle == INVALID_HANDLE_VALUE)
    {
        return WINBIO_E_INVALID_DEVICE_STATE;
    }

    // Initialize the RejectDetail argument.
    *RejectDetail = 0;

    // Wait for I/O completion. This sample assumes that the I/O operation was 
    // started using the code example shown in the SensorAdapterStartCapture
    // documentation.
    SetLastError(ERROR_SUCCESS);

    result = GetOverlappedResult(
                Pipeline->SensorHandle,
                &sensorContext->Overlapped,
                &bytesReturned,
                TRUE
                );
    if (!result)
    {
        // There was an I/O error.
        return _AdapterGetHresultFromWin32(GetLastError());
    }

    if (bytesReturned == sizeof (DWORD))
    {
        // The buffer is not large enough.  This can happen if a device needs a 
        // bigger buffer depending on the purpose. Allocate a larger buffer and 
        // force the caller to reissue their I/O request.
        DWORD allocationSize = sensorContext->CaptureBuffer->PayloadSize;

        // Allocate at least the minimum buffer size needed to retrieve the 
        // payload structure.
        if (allocationSize < sizeof(WINBIO_CAPTURE_DATA))
        {
            allocationSize = sizeof(WINBIO_CAPTURE_DATA);
        }

        // Free the old buffer and allocate a new one.
        _AdapterRelease(sensorContext->CaptureBuffer);
        sensorContext->CaptureBuffer = NULL;

        sensorContext->CaptureBuffer = 
            (PWINBIO_CAPTURE_DATA)_AdapterAlloc(allocationSize);
        if (sensorContext->CaptureBuffer == NULL)
        {
            sensorContext->CaptureBufferSize = 0;
            return E_OUTOFMEMORY;
        }
        sensorContext->CaptureBufferSize = allocationSize;
        return WINBIO_E_BAD_CAPTURE;
    }

    // Normalize the status value before sending it back to the biometric service.
    if (sensorContext->CaptureBuffer != NULL &&
        sensorContext->CaptureBufferSize >= sizeof (WINBIO_CAPTURE_DATA))
    {
        switch (sensorContext->CaptureBuffer->SensorStatus)
        {
            case WINBIO_SENSOR_ACCEPT:
                // The capture was acceptable.
                break;

            case WINBIO_SENSOR_REJECT:
                // The capture was not acceptable. Overwrite the WinBioHresult value
                // in case it has not been properly set.
                sensorContext->CaptureBuffer->WinBioHresult = WINBIO_E_BAD_CAPTURE;
                break;

            case WINBIO_SENSOR_BUSY:
                // The device is busy. Reset the WinBioHresult value in case it 
                // has not been properly set.
                sensorContext->CaptureBuffer->WinBioHresult = WINBIO_E_DEVICE_BUSY;
                break;

            case WINBIO_SENSOR_READY:
            case WINBIO_SENSOR_NOT_CALIBRATED:
            case WINBIO_SENSOR_FAILURE:
            default:
                // There has been a device failure. Reset the WinBioHresult value
                // in case it has not been properly set.
                sensorContext->CaptureBuffer->WinBioHresult = WINBIO_E_INVALID_DEVICE_STATE;
                break;
        }

        *RejectDetail = sensorContext->CaptureBuffer->RejectDetail;
        hr = sensorContext->CaptureBuffer->WinBioHresult;
    }
    else
    {
        // The buffer is not large enough or the buffer pointer is NULL.
        hr = WINBIO_E_INVALID_DEVICE_STATE;
    }
    return hr;
}

Requirements

See also

Plug-in Functions

SensorAdapterCancel

SensorAdapterExportSensorData

SensorAdapterPushDataToEngine

SensorAdapterStartCapture