CIM_CDROMDrive class

The CIM_CDROMDrive class represents a CD-ROM drive on the computer.

Note  The name of the drive does not correspond to the logical drive letter assigned to the device, which is the name of the logical storage device that is dependent on the drive.
 
Important  The DMTF (Distributed Management Task Force) CIM (Common Information Model) classes are the parent classes upon which WMI classes are built. WMI currently supports only the CIM 2.x version schemas.
 

The following syntax is simplified from Managed Object Format (MOF) code and includes all inherited properties. Properties are listed in alphabetic order, not MOF order.

Syntax

[Abstract, UUID("{8502C52B-5FBB-11D2-AAC1-006008C78BC7}"), AMENDMENT]
class CIM_CDROMDrive : CIM_MediaAccessDevice
{
  string   Caption;
  string   Description;
  datetime InstallDate;
  string   Name;
  string   Status;
  uint16   Availability;
  uint32   ConfigManagerErrorCode;
  boolean  ConfigManagerUserConfig;
  string   CreationClassName;
  string   DeviceID;
  uint16   PowerManagementCapabilities[];
  boolean  ErrorCleared;
  string   ErrorDescription;
  uint32   LastErrorCode;
  string   PNPDeviceID;
  boolean  PowerManagementSupported;
  uint16   StatusInfo;
  string   SystemCreationClassName;
  string   SystemName;
  uint16   Capabilities[];
  string   CapabilityDescriptions[];
  string   CompressionMethod;
  uint64   DefaultBlockSize;
  string   ErrorMethodology;
  uint64   MaxBlockSize;
  uint64   MaxMediaSize;
  uint64   MinBlockSize;
  boolean  NeedsCleaning;
  uint32   NumberOfMediaSupported;
};

Members

The CIM_CDROMDrive class has these types of members:

Methods

The CIM_CDROMDrive class has these methods.

MethodDescription
Reset

Requests a reset of the logical device. Not implemented by WMI.

SetPowerState

Defines the desired power state for a logical device and when a device should be put into that state. Not implemented by WMI.

 

Properties

The CIM_CDROMDrive class has these properties.

Availability
Data type: uint16
Access type: Read-only
Qualifiers: MappingStrings ("MIF.DMTF|Operational State|003.5", "MIB.IETF|HOST-RESOURCES-MIB.hrDeviceStatus")

Availability and status of the device.

This property is inherited from CIM_LogicalDevice.

Other (1)

Unknown (2)

Running/Full Power (3)

Warning (4)

In Test (5)

Not Applicable (6)

Power Off (7)

Off Line (8)

Off Duty (9)

Degraded (10)

Not Installed (11)

Install Error (12)

Power Save - Unknown (13)

The device is known to be in a power save mode, but its exact status is unknown.

Power Save - Low Power Mode (14)

The device is in a power save state but still functioning, and may exhibit degraded performance.

Power Save - Standby (15)

The device is not functioning but could be brought to full power quickly.

Power Cycle (16)

Power Save - Warning (17)

The device is in a warning state, though also in a power save mode.

Paused (18)

The device is paused.

Not Ready (19)

The device is not ready.

Not Configured (20)

The device is not configured.

Quiesced (21)

The device is quiet.

Capabilities
Data type: uint16 array
Access type: Read-only
Qualifiers: ArrayType ("Indexed"), MappingStrings ("MIF.DMTF|Storage Devices|001.9", "MIF.DMTF|Storage Devices|001.11", "MIF.DMTF|Storage Devices|001.12", "MIF.DMTF|Disks|003.7"), ModelCorrespondence ("CIM_MediaAccessDevice.CapabilityDescriptions")

Capabilities of the media access device.

This property is inherited from CIM_MediaAccessDevice.

Unknown (0)

Unknown.

Other (1)

Other.

Sequential Access (2)

Sequential access.

Random Access (3)

Random access.

Supports Writing (4)

Writing.

Encryption (5)

Encryption.

Compression (6)

Compression.

Supports Removeable Media (7)

Removable media.

Manual Cleaning (8)

Manual cleaning.

Automatic Cleaning (9)

Automatic cleaning.

SMART Notification (10)

SMART notification.

Supports Dual Sided Media (11)

Distinguishes a device that can access both sides of dual-sided media from a device that reads only a single side and requires the media to be turned over.

Predismount Eject Not Required (12)

Indicates that the media does not have to be explicitly ejected from the device before being accessed by a picker element.

CapabilityDescriptions
Data type: string array
Access type: Read-only
Qualifiers: ArrayType ("Indexed"), ModelCorrespondence ("CIM_MediaAccessDevice.Capabilities")

Array of free-form strings that provides detailed explanations for access device features indicated in the Capabilities array.

Note  Each entry of this array is related to the entry in the Capabilities array, located at the same index.
 

This property is inherited from CIM_MediaAccessDevice.

Caption
Data type: string
Access type: Read-only
Qualifiers: MaxLen (64), DisplayName ("Caption")

A short textual description of the object.

This property is inherited from CIM_ManagedSystemElement.

CompressionMethod
Data type: string
Access type: Read-only

Free-form string that indicates the algorithm or tool used to compress the logical file. If it is not possible to describe the compression scheme (because it is unknown), use the following:If , use "Unknown". If , use "Compressed". , use "Not Compressed".

This property is inherited from CIM_MediaAccessDevice.

("Unknown")

The compression scheme is unknown or not described.

("Compressed")

The logical file is compressed, but the compression scheme is unknown or not described

("Not Compressed")

If the logical file is not compressed

ConfigManagerErrorCode
Data type: uint32
Access type: Read-only
Qualifiers: Schema ("Win32")

Win32 Configuration Manager error code.

This property is inherited from CIM_LogicalDevice.

This device is working properly. (0)

This device is not configured correctly. (1)

Windows cannot load the driver for this device. (2)

The driver for this device might be corrupted, or your system may be running low on memory or other resources. (3)

This device is not working properly. One of its drivers or your registry might be corrupted. (4)

The driver for this device needs a resource that Windows cannot manage. (5)

The boot configuration for this device conflicts with other devices. (6)

Cannot filter. (7)

The driver loader for the device is missing. (8)

This device is not working properly because the controlling firmware is reporting the resources for the device incorrectly. (9)

This device cannot start. (10)

This device failed. (11)

This device cannot find enough free resources that it can use. (12)

Windows cannot verify this device's resources. (13)

This device cannot work properly until you restart your computer. (14)

This device is not working properly because there is probably a re-enumeration problem. (15)

Windows cannot identify all the resources this device uses. (16)

This device is asking for an unknown resource type. (17)

Reinstall the drivers for this device. (18)

Failure using the VxD loader. (19)

Your registry might be corrupted. (20)

System failure: Try changing the driver for this device. If that does not work, see your hardware documentation. Windows is removing this device. (21)

This device is disabled. (22)

System failure: Try changing the driver for this device. If that doesn't work, see your hardware documentation. (23)

This device is not present, is not working properly, or does not have all its drivers installed. (24)

Windows is still setting up this device. (25)

Windows is still setting up this device. (26)

This device does not have valid log configuration. (27)

The drivers for this device are not installed. (28)

This device is disabled because the firmware of the device did not give it the required resources. (29)

This device is using an Interrupt Request (IRQ) resource that another device is using. (30)

This device is not working properly because Windows cannot load the drivers required for this device. (31)

ConfigManagerUserConfig
Data type: boolean
Access type: Read-only
Qualifiers: Schema ("Win32")

If TRUE, the device is using a user-defined configuration.

This property is inherited from CIM_LogicalDevice.

CreationClassName
Data type: string
Access type: Read-only
Qualifiers: CIM_Key

Name of the class or subclass used in the creation of an instance. When used with other key properties of the class, this property allows all instances of the class and its subclasses to be uniquely identified.

This property is inherited from CIM_LogicalDevice.

DefaultBlockSize
Data type: uint64
Access type: Read-only
Qualifiers: Units ("bytes")

Default block size, in bytes, for the device.

For more information about using uint64 values in scripts, see Scripting in WMI.

This property is inherited from CIM_MediaAccessDevice.

Description
Data type: string
Access type: Read-only
Qualifiers: DisplayName ("Description")

A textual description of the object.

This property is inherited from CIM_ManagedSystemElement.

DeviceID
Data type: string
Access type: Read-only
Qualifiers: CIM_Key

Address or other identifying information to uniquely name the logical device.

This property is inherited from CIM_LogicalDevice.

ErrorCleared
Data type: boolean
Access type: Read-only

If TRUE, the error reported in the LastErrorCode property is now cleared.

This property is inherited from CIM_LogicalDevice.

ErrorDescription
Data type: string
Access type: Read-only

Free-form string that supplies information about the error recorded in the LastErrorCode property and corrective actions to perform.

This property is inherited from CIM_LogicalDevice.

ErrorMethodology
Data type: string
Access type: Read-only

Free-form string that describes the types of error detection and correction supported by the device.

This property is inherited from CIM_MediaAccessDevice.

InstallDate
Data type: datetime
Access type: Read-only
Qualifiers: MappingStrings ("MIF.DMTF|ComponentID|001.5"), DisplayName ("Install Date")

Indicates when the object was installed. Lack of a value does not indicate that the object is not installed.

This property is inherited from CIM_ManagedSystemElement.

LastErrorCode
Data type: uint32
Access type: Read-only

Last error code reported by the logical device.

This property is inherited from CIM_LogicalDevice.

MaxBlockSize
Data type: uint64
Access type: Read-only
Qualifiers: Units ("bytes")

Maximum block size, in bytes, for media accessed by the device.

For more information about using uint64 values in scripts, see Scripting in WMI.

This property is inherited from CIM_MediaAccessDevice.

MaxMediaSize
Data type: uint64
Access type: Read-only
Qualifiers: MappingStrings ("MIF.DMTF|Sequential Access Devices|001.2"), Units ("kilobytes")

Maximum size, in kilobytes, of media supported by this device. Kilobytes are interpreted as the number of bytes multiplied by 1000 (not the number of bytes multiplied by 1024).

For more information about using uint64 values in scripts, see Scripting in WMI.

This property is inherited from CIM_MediaAccessDevice.

MinBlockSize
Data type: uint64
Access type: Read-only
Qualifiers: Units ("bytes")

Minimum block size, in bytes, for media accessed by the device.

For more information about using uint64 values in scripts, see Scripting in WMI.

This property is inherited from CIM_MediaAccessDevice.

Name
Data type: string
Access type: Read-only
Qualifiers: DisplayName ("Name")

Label by which the object is known. When subclassed, this property can be overridden to be a key property.

This property is inherited from CIM_ManagedSystemElement.

NeedsCleaning
Data type: boolean
Access type: Read-only

If TRUE, the media access device needs cleaning. Whether manual or automatic cleaning is possible is indicated in the Capabilities array property.

This property is inherited from CIM_MediaAccessDevice.

NumberOfMediaSupported
Data type: uint32
Access type: Read-only

Maximum number of multiple individual media that can be supported or inserted.

This property is inherited from CIM_MediaAccessDevice.

PNPDeviceID
Data type: string
Access type: Read-only
Qualifiers: Schema ("Win32")

Indicates the Win32 Plug and Play device identifier of the logical device.

Example: "*PNP030b"

This property is inherited from CIM_LogicalDevice.

PowerManagementCapabilities
Data type: uint16 array
Access type: Read-only

Indicates the specific power-related capabilities of the logical device.

This property is inherited from CIM_LogicalDevice.

Unknown (0)

The power-related capacities are unknown.

Not Supported (1)

Power-related capacities are not supported for this device.

Disabled (2)

Power-related capacities have been disabled.

Enabled (3)

The power management features are currently enabled but the exact feature set is unknown or the information is unavailable.

Power Saving Modes Entered Automatically (4)

The device can change its power state based on usage or other criteria.

Power State Settable (5)

The SetPowerState method is supported. This method is found on the parent CIM_LogicalDevice class and can be implemented. For more information, see Designing Managed Object Format (MOF) Classes.

Power Cycling Supported (6)

The SetPowerState method can be invoked with the PowerState parameter set to 5 ("Power Cycle").

Timed Power On Supported (7)

The SetPowerState method can be invoked with the PowerState parameter set to 5 ("Power Cycle") and the Time parameter set to a specific date and time, or interval, for power-on.

PowerManagementSupported
Data type: boolean
Access type: Read-only

If TRUE, the device can be power managed, that is, put into a power-save state. If FALSE, the integer value 1 ("Not Supported") should be the only entry in the PowerManagementCapabilities array.

This property does not indicate whether power management features are currently enabled, or if enabled, which features are supported. For more information, see the PowerManagementCapabilities array.

This property is inherited from CIM_LogicalDevice.

Status
Data type: string
Access type: Read-only
Qualifiers: MaxLen (10), DisplayName ("Status")

String that indicates the current status of the object. Operational and non-operational status can be defined. Operational status can include "OK", "Degraded", and "Pred Fail". "Pred Fail" indicates that an element is functioning properly, but is predicting a failure (for example, a SMART-enabled hard disk drive).

Non-operational status can include "Error", "Starting", "Stopping", and "Service". "Service" can apply during disk mirror-resilvering, reloading a user permissions list, or other administrative work. Not all such work is online, but the managed element is neither "OK" nor in one of the other states.

This property is inherited from CIM_ManagedSystemElement.

Values include the following:

OK ("OK")

Error ("Error")

Degraded ("Degraded")

Unknown ("Unknown")

Pred Fail ("Pred Fail")

Starting ("Starting")

Stopping ("Stopping")

Service ("Service")

Stressed ("Stressed")

NonRecover ("NonRecover")

No Contact ("No Contact")

Lost Comm ("Lost Comm")

StatusInfo
Data type: uint16
Access type: Read-only
Qualifiers: MappingStrings ("MIF.DMTF|Operational State|003.3")

State of the logical device. If this property does not apply to the logical device, the value 5 ("Not Applicable") should be used.

This property is inherited from CIM_LogicalDevice.

Other (1)

Unknown (2)

Enabled (3)

Disabled (4)

Not Applicable (5)

SystemCreationClassName
Data type: string
Access type: Read-only
Qualifiers: Propagated ("CIM_System.CreationClassName"), CIM_Key

The scoping system's creation class name.

This property is inherited from CIM_LogicalDevice.

SystemName
Data type: string
Access type: Read-only
Qualifiers: Propagated ("CIM_System.Name"), CIM_Key

The scoping system's name.

This property is inherited from CIM_LogicalDevice.

Remarks

The CIM_CDROMDrive class is derived from CIM_MediaAccessDevice.

WMI does not implement this class. For more information about classes derived from CIM_CDROMDrive, see Win32 Classes.

This documentation is derived from the CIM class descriptions published by the DMTF. Microsoft may have made changes to correct minor errors, conform to Microsoft SDK documentation standards, or provide more information.

Requirements

Minimum supported client

Windows Vista

Minimum supported server

Windows Server 2008

Namespace

Root\CIMV2

MOF

CIMWin32.mof

DLL

CIMWin32.dll

See also

CIM_MediaAccessDevice

 

 

Show: