Manages visual states and the logic for transitions between visual states for controls. Also provides the attached property support for VisualStateManager.VisualStateGroups, which is how you define visual states in XAML for a control template.
The VisualStateManager class has these types of members:
The VisualStateManager class has these constructors.
|VisualStateManager||Initializes a new instance of the VisualStateManager class.|
The VisualStateManager class has these methods. It also inherits methods from the Object class.
|ClearValue||Clears the local value of a dependency property. (Inherited from DependencyObject)|
|GetAnimationBaseValue||Returns any base value established for a dependency property, which would apply in cases where an animation is not active. (Inherited from DependencyObject)|
|GetCustomVisualStateManager||Gets the value of the VisualStateManager.CustomVisualStateManager attached property.|
|GetValue||Returns the current effective value of a dependency property from a DependencyObject. (Inherited from DependencyObject)|
|GetVisualStateGroups||Gets the value of the VisualStateManager.VisualStateGroups attached property.|
|GoToState||Transitions a control between two states, by requesting a new VisualState by name.|
|GoToStateCore||When overridden in a derived class, transitions a control between states.|
|RaiseCurrentStateChanged||When overridden in a derived class, fires the CurrentStateChanged event on the specified VisualStateGroup.|
|RaiseCurrentStateChanging||When overridden in a derived class, fires the CurrentStateChanging event on the specified VisualStateGroup.|
|ReadLocalValue||Returns the local value of a dependency property, if a local value is set. (Inherited from DependencyObject)|
|RegisterPropertyChangedCallback||Registers an instance-specific property value for a property-changed notification that comes from the core property system. (Inherited from DependencyObject)|
|SetCustomVisualStateManager||Sets the value of the VisualStateManager.CustomVisualStateManager attached property.|
|SetValue||Sets the local value of a dependency property on a DependencyObject. (Inherited from DependencyObject)|
|UnregisterPropertyChangedCallback||Cancels a change notification that was previously registered by calling RegisterPropertyChangedCallback. (Inherited from DependencyObject)|
The VisualStateManager class has these attached properties.
The VisualStateManager class has these properties.
|Read-only||Identifies the VisualStateManager.CustomVisualStateManager dependency property.|
|Read-only||Gets the CoreDispatcher that this object is associated with. The CoreDispatcher represents a facility that can access the DependencyObject on the UI thread even if the code is initiated by a non-UI thread. (Inherited from DependencyObject)|
VisualStateManager supports two important features for control authors, and for app developers who are applying a custom template to a control:
- Control authors or app developers add VisualStateGroup object elements to the root element of a control template definition in XAML, using the VisualStateManager.VisualStateGroups attached property. Within a VisualStateGroup element, each VisualState represents a discrete visual state of a control. Each VisualState has a name that is representative of a UI state that can be changed by the user, or changed by control logic. A VisualState consists mainly of a Storyboard. This Storyboard targets individual dependency property values that should be applied whenever the control is in that visual state. For more info on how to write visual states in XAML, including example code, see Storyboarded animations for visual states.
- Control authors or app developers transition between these states by calling the static GoToState method of VisualStateManager. Control authors do this whenever the control logic handles events that indicate a change of state, or control logic initiates a state change by itself. It's more common for control definition code to do this rather than app code, so that all the possible visual states and their transitions and trigger conditions are there by default for app code, and the logic is encapsulated by the control.
Most developers will use just two of the VisualStateManager APIs: VisualStateManager.VisualStateGroups, and GoToState, as described above. The remaining APIs are all for extension support and creating a custom VisualStateManager. For more info see "Custom VisualStateManager" section in this topic.
When you edit copies of styles as enabled by the XAML design surface of Microsoft Visual Studio, the visual states from the default template are defined in the XAML you are editing. Make sure you don't delete these states or change their names, because the control logic is expecting that these visual states exist in the template.
In addition to the visual states, the visual state model also includes transitions. Transitions are animation actions controlled by a Storyboard that occur between each visual state when the state is changed. The transition can be defined differently for each combination of starting state and ending state as defined by your control's set of visual states. Transitions are defined by the Transitions property of VisualStateGroup, in XAML using property element syntax. Most default control templates don't define transitions. In absence of specifically defined transitions, the transitions between states happen instantaneously (zero-duration). For more info, see VisualTransition.
VisualStateManager supports these XAML attached properties:
- VisualStateManager.VisualStateGroups (a collection)
- VisualStateManager.CustomVisualStateManager (for advanced scenarios)
As an advanced scenario, it is possible to derive from VisualStateManager and change the default GoToState behavior. Follow these guidelines:
- The derived class should override the protected GoToStateCore method. Any instance of the custom VisualStateManager uses this Core logic when its GoToState method is called.
- To use a custom VisualStateManager in app code, reference the custom class as a resource using the VisualStateManager.CustomVisualStateManager attached property. You set VisualStateManager.CustomVisualStateManager on the root element of a ControlTemplate, alongside the VisualStateManager.VisualStateGroups attached property usage that defines the visual states for the template.
That's the basic requirements for creating and using a custom VisualStateManager. You also can choose to override a few more behaviors:
- Override RaiseCurrentStateChanged to control when the CurrentStateChanged event is fired by a VisualStateGroup being managed by the VisualStateManager.
- Override RaiseCurrentStateChanging to control when the CurrentStateChanging event is fired by a VisualStateGroup being managed by the VisualStateManager.
- Override or overload the constructor if your custom class needs additional information to initialize with.
All the other APIs (CustomVisualStateManagerProperty, GetCustomVisualStateManager, GetVisualStateGroups, SetCustomVisualStateManager) are infrastructure for attached property support, and you don't need to call them or do anything with them.
Visual states are sometimes useful for scenarios where you want to change the state of some area of UI that's not immediately a Control subclass. You can't do this directly because the control parameter of the GoToState method requires a Control subclass, which refers to the object that the VisualStateManager acts upon. Page is a Control subclass, and it's fairly rare that you'd be showing UI in a context where you don't have a Page, or your Window.Content root isn't a Control subclass. We recommend you define a custom UserControl to either be the Window.Content root or be a container for other content you want to apply states to (such as a Panel). Then you can call GoToState on your UserControl and apply states regardless of whether the rest of the content is a Control. For example you could apply visual states to UI that otherwise consists of just a SwapChainPanel so long as you placed that within your UserControl and declared named states that apply to the properties of the parent UserControl or of the named SwapChainPanel part of the template.
This example shows how to use the VisualStateManager.VisualStateGroups XAML attached property. Note how there is otherwise no "VisualStateManager" tag defined. Conceptually, VisualStateManager.VisualStateGroups contains the visual states for a control, as an immediate child tag of the template root in a control template.
The particular set of visual states contains one VisualStateGroup, called "CommonStates", which defines the "PointerOver" and "Normal" VisualState objects. When the user puts the pointer over the Button, the Grid changes from green to red in .5 seconds. When the user moves the pointer away from the button, the Grid immediately changes back to green.
<ControlTemplate TargetType="Button"> <Grid > <VisualStateManager.VisualStateGroups> <VisualStateGroup x:Name="CommonStates"> <VisualStateGroup.Transitions> <!--Take one half second to transition to the PointerOver state.--> <VisualTransition To="PointerOver" GeneratedDuration="0:0:0.5"/> </VisualStateGroup.Transitions> <VisualState x:Name="Normal" /> <!--Change the SolidColorBrush, ButtonBrush, to red when the Pointer is over the button.--> <VisualState x:Name="PointerOver"> <Storyboard> <ColorAnimation Storyboard.TargetName="ButtonBrush" Storyboard.TargetProperty="Color" To="Red" /> </Storyboard> </VisualState> </VisualStateGroup> </VisualStateManager.VisualStateGroups> <Grid.Background> <SolidColorBrush x:Name="ButtonBrush" Color="Green"/> </Grid.Background> </Grid> </ControlTemplate>
For another example that shows how to define a visual state that changes the Visibility of an element of control composition (a very common situation in visual state design), see the example XAML in Storyboarded animations for visual states.
This example comes from the templates of many of the Windows SDK samples. Here, visual states are defined to provide different layouts if the horizontal size of the app is less than 768 pixels. Note how the
DefaultLayout state doesn't change anything because the default control values (not shown) should apply. But when the visual state
Below768Layout is used, certain properties of the template are changed so that the visuals are suitable for display under that condition.
<common:LayoutAwarePage> <Grid> ... <VisualStateManager.VisualStateGroups> <!-- Visual states reflect the application's window size --> <VisualStateGroup> <VisualState x:Name="DefaultLayout"> <Storyboard> </Storyboard> </VisualState> <VisualState x:Name="Below768Layout"> <Storyboard> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="(FrameworkElement.Margin)" Storyboard.TargetName="ContentRoot"> <DiscreteObjectKeyFrame KeyTime="0"> <DiscreteObjectKeyFrame.Value> <Thickness>20,20,20,20</Thickness> </DiscreteObjectKeyFrame.Value> </DiscreteObjectKeyFrame> </ObjectAnimationUsingKeyFrames> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="(FrameworkElement.HorizontalAlignment)" Storyboard.TargetName="FooterPanel"> <DiscreteObjectKeyFrame KeyTime="0"> <DiscreteObjectKeyFrame.Value> <HorizontalAlignment>Left</HorizontalAlignment> </DiscreteObjectKeyFrame.Value> </DiscreteObjectKeyFrame> </ObjectAnimationUsingKeyFrames> </Storyboard> </VisualState> </VisualStateGroup> </VisualStateManager.VisualStateGroups> </Grid> </common:LayoutAwarePage>
The next snippet is code to go along with the XAML, showing how an app might detect the app window width and use that info to call the appropriate visual state.
String state = (Window.Current.Bounds.Width > 768) ? "DefaultLayout" : "Below768Layout"; VisualStateManager.GoToState(this, state, false); // 'this' is the LayoutAwarePage, scope is page code-behind
Requirements (Windows 10 device family)
Requirements (Windows 8.x and Windows Phone 8.x)
Minimum supported client
|Windows 8 [Windows Store apps only]|
Minimum supported server
|Windows Server 2012 [Windows Store apps only]|
Minimum supported phone
|Windows Phone 8.1 [Windows Runtime apps only]|
- Quickstart: Control templates
- Storyboarded animations
- Storyboarded animations for visual states
- Attached properties overview
- Snap sample
- XAML control and app styling sample