This documentation is archived and is not being maintained.

Type::GetType Method (String)

Gets the Type with the specified name, performing a case-sensitive search.

Namespace:  System
Assembly:  mscorlib (in mscorlib.dll)

static Type^ GetType(
	String^ typeName


Type: System::String
The assembly-qualified name of the type to get. See AssemblyQualifiedName. If the type is in the currently executing assembly or in Mscorlib.dll, it is sufficient to supply the type name qualified by its namespace.

Return Value

Type: System::Type
The type with the specified name, if found; otherwise, nullptr.


typeName is nullptr.


A class initializer is invoked and throws an exception.


typeName represents a generic type that has a pointer type, a ByRef type, or Void as one of its type arguments.


typeName represents a generic type that has an incorrect number of type arguments.


typeName represents a generic type, and one of its type arguments does not satisfy the constraints for the corresponding type parameter.


typeName represents an array of TypedReference.


The assembly or one of its dependencies was found, but could not be loaded.


The assembly or one of its dependencies is not valid.


Version 2.0 or later of the common language runtime is currently loaded, and the assembly was compiled with a later version.

You can use the GetType method to obtain a Type object for a type in another assembly, if the you know its namespace-qualified name. GetType causes loading of the assembly specified in typeName. You can also load an assembly using the Load method, and then use the GetType or GetTypes methods of the Assembly class to get Type objects. If a type is in an assembly known to your program at compile time, it is more efficient to use typeof in C#, GetType in Visual Basic, or typeid in C++.

GetType only works on assemblies loaded from disk. If you call GetType to look up a type defined in a dynamic assembly defined using the System.Reflection.Emit services, you might get inconsistent behavior. The behavior depends on whether the dynamic assembly is persistent, that is, created using the RunAndSave or Save access modes of the System.Reflection.Emit::AssemblyBuilderAccess enumeration. If the dynamic assembly is persistent and has been written to disk before GetType is called, the loader finds the saved assembly on disk, loads that assembly, and retrieves the type from that assembly. If the assembly has not been saved to disk when GetType is called, the method returns nullptr. GetType does not understand transient dynamic assemblies; therefore, calling GetType to retrieve a type in a transient dynamic assembly returns nullptr.

To use GetType on a dynamic module, subscribe to the AppDomain::AssemblyResolve event and call GetType before saving. Otherwise, you will get two copies of the assembly in memory.

The following table shows what members of a base class are returned by the Get methods when reflecting on a type.

Member Type








Yes. A field is always hide-by-name-and-signature.


Not applicable

The common type system rule is that the inheritance is the same as that of the methods that implement the property. Reflection treats properties as hide-by-name-and-signature. See note 2 below.



Yes. A method (both virtual and non-virtual) can be hide-by-name or hide-by-name-and-signature.

Nested Type




Not applicable

The common type system rule is that the inheritance is the same as that of the methods that implement the property. Reflection treats properties as hide-by-name-and-signature. See note 2 below.

  1. Hide-by-name-and-signature considers all of the parts of the signature, including custom modifiers, return types, parameter types, sentinels, and unmanaged calling conventions. This is a binary comparison.

  2. For reflection, properties and events are hide-by-name-and-signature. If you have a property with both a get and a set accessor in the base class, but the derived class has only a get accessor, the derived class property hides the base class property, and you will not be able to access the setter on the base class.

  3. Custom attributes are not part of the common type system.

Arrays or COM types are not searched for unless they have already been loaded into the table of available classes.

typeName can be the type name qualified by its namespace or an assembly-qualified name that includes an assembly name specification. See AssemblyQualifiedName.

If typeName includes the namespace but not the assembly name, this method searches only the calling object's assembly and Mscorlib.dll, in that order. If typeName is fully qualified with the partial or complete assembly name, this method searches in the specified assembly. If the assembly has a strong name, a complete assembly name is required.

The AssemblyQualifiedName property returns a fully qualified type name including nested types, the assembly name, and generic type arguments. All compilers that support the common language runtime will emit the simple name of a nested class, and reflection constructs a mangled name when queried, in accordance with the following conventions.


In the .NET Framework version 2.0, processor architecture is added to assembly identity, and can be specified as part of assembly name strings. For example, "ProcessorArchitecture=msil". However, it is not included in the string returned by the AssemblyQualifiedName property, for compatibility reasons. You can also load types by creating an AssemblyName object and passing it to an appropriate overload of the Load method. You can then use the Assembly::GetType method to load types from the assembly. See also AssemblyName::ProcessorArchitecture.



Backslash (\)

Escape character.

Backtick (`)

Precedes one or more digits representing the number of type parameters, located at the end of the name of a generic type.

Brackets ([])

Enclose a generic type argument list, for a constructed generic type; within a type argument list, enclose an assembly-qualified type.

Comma (,)

Precedes the Assembly name.

Period (.)

Denotes namespace identifiers.

Plus sign (+)

Precedes a nested class.

For example, the fully qualified name for a class might look like this:


If the namespace were TopNamespace.Sub+Namespace, then the string would have to precede the plus sign (+) with an escape character (\) to prevent it from being interpreted as a nesting separator. Reflection emits this string as follows:


A "++" becomes "\+\+", and a "\" becomes "\\".

This qualified name can be persisted and later used to load the Type. To search for and load a Type, use GetType either with the type name only or with the assembly qualified type name. GetType with the type name only will look for the Type in the caller's assembly and then in the System assembly. GetType with the assembly qualified type name will look for the Type in any assembly.

Type names may include trailing characters that denote additional information about the type, such as whether the type is a reference type, a pointer type or an array type. To retrieve the type name without these trailing characters, use t.GetElementType().ToString(), where t is the type.

Spaces are relevant in all type name components except the assembly name. In the assembly name, spaces before the ',' separator are relevant, but spaces after the ',' separator are ignored.

The name of a generic type ends with a backtick (`) followed by digits representing the number of generic type arguments. The purpose of this name mangling is to allow compilers to support generic types with the same name but with different numbers of type parameters, occurring in the same scope. For example, reflection returns the mangled names Tuple`1 and Tuple`2 from the generic methods Tuple(Of T) and Tuple(Of T0, T1) in Visual Basic, or Tuple<T> and Tuple<T0, T1> in Visual C#.

For generic types, the type argument list is enclosed in brackets, and the type arguments are separated by commas. For example, a generic Dictionary<TKey, TValue> has two type parameters. A Dictionary<TKey, TValue> of MyType with keys of type String might be represented as follows:


To specify an assembly-qualified type within a type argument list, enclose the assembly-qualified type within brackets. Otherwise, the commas that separate the parts of the assembly-qualified name are interpreted as delimiting additional type arguments. For example, a Dictionary<TKey, TValue> of MyType fromMyAssembly.dll, with keys of type String, might be specified as follows:


An assembly-qualified type can be enclosed in brackets only when it appears within a type parameter list. The rules for searching assemblies for qualified and unqualified types in type parameter lists are the same as the rules for qualified and unqualified nongeneric types.

Nullable types are a special case of generic types. For example, a nullable Int32 is represented by the string "System.Nullable`1[System.Int32]".


In C#, C++, and Visual Basic you can also get nullable types using type operators. For example, the nullable Boolean type is returned by typeof(Nullable<bool>) in C#, by Nullable<Boolean>::typeid in C++, and by GetType(Nullable(Of Boolean)) in Visual Basic.

The following table shows the syntax you use with GetType for various types.

To Get


A nullable Int32


An unmanaged pointer to MyType


An unmanaged pointer to a pointer to MyType


A managed pointer or reference to MyType

Type.GetType("MyType&"). Note that unlike pointers, references are limited to one level.

A parent class and a nested class


A one-dimensional array with a lower bound of 0


A one-dimensional array with an unknown lower bound


An n-dimensional array

A comma (,) inside the brackets a total of n-1 times. For example, System.Object[,,] represents a three-dimensional Object array.

An array of one-dimensional arrays


A rectangular two-dimensional array with unknown lower bounds


A generic type with one type argument


A generic type with two type arguments


A generic type with two assembly-qualified type arguments


An assembly-qualified generic type with an assembly-qualified type argument


A generic type whose type argument is a generic type with two type arguments


The following example retrieves the type of System.Int32 and uses that type object to display the FullName property of System.Int32.

using namespace System;
int main()

      // Get the type of a specified class.
      Type^ myType1 = Type::GetType( "System.Int32" );
      Console::WriteLine( "The full name is {0}.", myType1->FullName );

      // Since NoneSuch does not exist in this assembly, GetType throws a TypeLoadException.
      Type^ myType2 = Type::GetType( "NoneSuch", true );
      Console::WriteLine( "The full name is {0}.", myType2->FullName );
   catch ( TypeLoadException^ e ) 
      Console::WriteLine( e->Message );
   catch ( Exception^ e ) 
      Console::WriteLine( e->Message );


.NET Framework

Supported in: 4, 3.5, 3.0, 2.0, 1.1, 1.0

.NET Framework Client Profile

Supported in: 4, 3.5 SP1

Portable Class Library

Supported in: Portable Class Library

Windows 7, Windows Vista SP1 or later, Windows XP SP3, Windows XP SP2 x64 Edition, Windows Server 2008 (Server Core not supported), Windows Server 2008 R2 (Server Core supported with SP1 or later), Windows Server 2003 SP2

The .NET Framework does not support all versions of every platform. For a list of the supported versions, see .NET Framework System Requirements.