Defines a connection point object that enables a server control acting as a provider to form a connection with a consumer.
Assembly: System.Web (in System.Web.dll)
[AspNetHostingPermissionAttribute(SecurityAction::LinkDemand, Level = AspNetHostingPermissionLevel::Minimal)] [AspNetHostingPermissionAttribute(SecurityAction::InheritanceDemand, Level = AspNetHostingPermissionLevel::Minimal)] public ref class ProviderConnectionPoint : public ConnectionPoint
In every Web Parts connection between two server controls, each control must have (among other requirements) an associated connection point object that enables it to connect to the other control and to either provide or consume data, depending on whether the control is designated as the provider or consumer for the connection. A ConnectionPoint object in general contains the details for how a control can connect to another control and the type of data it can share. For a control acting as the provider in a connection, its connection point must be a object. For details on Web Parts connections and connection points, see the topics listed in the See Also section below.
To create a object, several steps are required:
Create an interface. When a provider shares data with a consumer, it does so by getting an instance of an interface, and returning that instance to a consumer.
Implement the interface in a provider. A WebPart or other server control (any type of server control in a WebPartZoneBase zone can be used) that will be the provider must implement the interface created in the first step.
Identify a callback method. A method in the provider must be identified as the callback method to establish a connection. This method returns an instance of the implemented interface to a consumer. The Web Parts approach for identifying a callback method in the provider is to add a ConnectionProvider metadata attribute (defined by the ConnectionProviderAttribute class) to the method that returns the interface instance. When the attribute is added, the only required parameter is a display name to use for the provider connection point. Optional parameters can also be added, such as an ID for the connection point.
After a control has been equipped to act as a provider, the control can participate in connections (assuming that a consumer control is similarly equipped and available). To create a static, declarative connection in the markup of a Web page, developers can use the <asp:webpartconnection> element. If the ConnectionProvider attribute in the provider source code that identifies the callback method specifies an ID for the connection point, then that value must be assigned to the ProviderConnectionPointID attribute in the <asp:webpartconnection> element on a page. One reason that a developer might specify an ID for a provider connection point is if there are multiple connection points in the provider control. If an ID is not specified for the provider connection point in the provider control, a value does not have to be assigned to the ProviderConnectionPointID attribute in the page either, because the connection will be created using a default value obtained from the DefaultID field.
To create a connection in code, developers must create a new object by calling the GetProviderConnectionPoints method and passing to it the ID of the provider control, along with the ID or index of the defined object in the provider control. The returned object, along with a reference to the provider control, a reference to the consumer control, and a corresponding ConsumerConnectionPoint object, are all passed to the ConnectWebParts method to create a new WebPartConnection object.
Although developers can use provider connection points as part of establishing connections either declaratively or programmatically, users can also interact with provider connection points to establish connections through the user interface (UI). If developers declare a ConnectionsZone control on a Web page, it provides a run-time UI for users to create connections. If users choose the consumer control as the starting point for establishing the connection by clicking its connect verb (they could also choose the provider; there is no difference in the resulting connection), in the UI they will see a drop-down list control with the display name of the available provider connection point (or points if there are multiple ones). Users must select a provider connection point to create a connection.
A object associates directly with a specific provider control, and stores details about a connection in the properties it inherits from the base ConnectionPoint class. For example, in the inherited InterfaceType property, a provider connection point keeps the type of interface returned by the provider. If the provider and consumer in a connection both work with the same interface type, the controls are compatible and capable of forming a direct connection. If the provider and consumer cannot work with the same interface type, they are incompatible and must use a WebPartTransformer object to translate the provider connection point's InterfaceType value into a type that the consumer can work with. Another important inherited property is the DisplayName property, which provides a friendly name to display in the UI for users to choose a provider connection point when creating connections. The display name is the required parameter when developers add a ConnectionProvider attribute to the callback method in a provider control. The inherited ID property is also useful, as indicated above, because it provides a unique identifier for a provider connection point in the event that a provider has multiple connection points. A provider can have multiple objects defined in it, and in this case, when developers add the ConnectionProvider attribute to a method, they should specify an ID value to distinguish each connection point. One other notable inherited property is the AllowsMultipleConnections property, which indicates whether a provider connection point can connect simultaneously to multiple consumers. This property value is true by default for provider connection points (whereas it defaults to false for consumer connection points).
The class adds several unique methods to the members it inherits from the ConnectionPoint class. The GetObject method retrieves an instance of the interface that the callback method will return to consumers. The GetSecondaryInterfaces method retrieves additional consumer interfaces that are part of an existing connection, but are not the interfaces used to establish the connection.
The following code example shows simple ways to create a connection declaratively, programmatically, or through the UI, in each case making use of a provider connection point.
The example has four parts:
A user control that enables you to change the Web Parts display mode on a page.
Source code for an interface and two WebPart controls acting as the provider and the consumer for a connection.
A Web page to host all the controls and run the code example.
An explanation of how to run the example page.
The first part of this code example is the user control that enables users to change display modes on a Web page. Save the following source code to an .ascx file, giving it the file name that is assigned to the Src attribute of the Register directive for this user control, which is near the top of the hosting Web page. For details about display modes and a description of the source code in this control, see Walkthrough: Changing Display Modes on a Web Parts Page.
The second part of the code example is the source code for the interface and controls. The source file contains a simple interface named IZipCode. There is also a WebPart class named ZipCodeWebPart that implements the interface and acts as the provider control. Its ProvideIZipCode method is the callback method that implements the interface's only member. The method simply returns an instance of the interface. Note that the method is marked with a ConnectionProvider attribute in its metadata. This is the mechanism for identifying the method as the callback method for the provider's connection point. The other WebPart class is named WeatherWebPart, and it acts as the consumer for the connection. This class has a method named GetZipCode that gets an instance of the IZipCode interface from the provider control. Note that this method is marked as the consumer's connection point method with a ConnectionConsumer attribute in its metadata. This is the mechanism for identifying the connection point method in the consumer control.
For the code example to run, you must compile this source code. You can compile it explicitly and put the resulting assembly in your Web site's Bin folder or the global assembly cache. Alternatively, you can put the source code in your site's App_Code folder, where it will be dynamically compiled at run time. This code example uses dynamic compilation. For a walkthrough that demonstrates how to compile, see Walkthrough: Developing and Using a Custom Web Server Control.
The third part of the code example is the Web page. Near the top are Register directives to register the custom controls that form the connection, and the user control that enables users to change display modes on the page. The connection itself is created declaratively within the <staticconnections> element on the page. This demonstrates one way of creating a connection--note the ProviderConnectionPointID attribute in the <asp:webpartconnection> element. You can also create the connection programmatically; the code for doing that is in the Button1_Click method. In this case, a object is created and then passed to a method that creates the actual connection. Whether the connection is created declaratively or programmatically, connection points must always be specified for both the provider and the consumer. The Button2_Click method accesses the ConnectionPoint objects for both the provider and the consumer, and writes some of their property values to a label in the page.
After you load the page in a browser, click the Connection Point Details button. Information about the provider and consumer connection points established in the declarative connection appears. Next, use the Display Mode drop-down control to switch the page into connect mode. On the verbs menu of the ZIP Code Consumer WebPart control (represented by a downward arrow in the title bar), click the connect verb. The connection UI appears, created automatically by the <asp:connectionszone> control declared in the page. This is another way of creating a connection (through the UI), along with the declarative and programmatic methods discussed earlier. Click the Disconnect button to terminate the existing static connection. Click the Create a Connection to a Provider link. The UI now displays a drop-down control that lists the provider connection point display name. Select the connection point in the drop-down list, and then click Connect to complete the connection. Next, click Disconnect again. Then, click the Dynamic Connection button to create a connection programmatically. Use the Display Mode control to return the page to browse mode. Click the Connection Point Details button again, to once more indicate details about the provider connection point object.
The example has demonstrated establishing a connection and using a provider connection point in three ways: a static connection declared in the Web page markup; a connection created in code that used a object; and a connection created by a user through the connection UI.
Windows 7, Windows Vista, Windows XP SP2, Windows XP Media Center Edition, Windows XP Professional x64 Edition, Windows XP Starter Edition, Windows Server 2008 R2, Windows Server 2008, Windows Server 2003, Windows Server 2000 SP4, Windows Millennium Edition, Windows 98
The .NET Framework and .NET Compact Framework do not support all versions of every platform. For a list of the supported versions, see .NET Framework System Requirements.