Establishing a Connection to the Emulator with ActiveSync

  • Article

You can establish a connection to the Emulator with Microsoft® ActiveSync® 3.5 or later. You cannot establish a connection with earlier versions of ActiveSync.

To configure the Emulator to establish a connection with ActiveSync

  1. Connect two serial ports with a null modem cable.

  2. On your development workstation, install ActiveSync.

  3. From the Target menu, choose Configure Remote Connection, and then choose the Services tab.

  4. From the Download box, choose Emulator, and then choose Configure.

  5. If KITL is built into your OS image, from the Serial Port 2 box choose COM1 or COM2, and then from the Serial Port 1 box choose None.

    - or -

    If KITL is not built into your OS image, from the Serial Port 1 box choose COM1 or COM2, and then from the Serial Port 2 box choose None.

  6. Choose OK, and then choose OK again.

  7. Configure ActiveSync to connect to the serial port — either COM1 or COM2 — that you did not assign to the Emulator.

See Also

Emulator

 Last updated on Friday, October 08, 2004

© 1992-2003 Microsoft Corporation. All rights reserved.